Thingiverse
Kassnar / ARMSCOR / Squire Bingham M16 Bipod Mount by Ambeos5
by Thingiverse
Last crawled date: 3 years, 1 month ago
Kassnar / ARMSCOR / Squire Bingham M16
This is a Rail mount for my Kassnar M16 to place on the bottom of the stock to mount a bipod. Included in the files is the rail (Thanks to LOTHANSTAR for this design) and the wedge, the stock is angled at the front so in order to level the mount the wedge has to be installed under the rail. the wedge is wider than the rail just cut to desired width, mainly i did that because calibration varies from printer to printer and i wanted to give you ample room for it to fit right. i installed it by superglueing the wedge to the rail after it dryed i drilled out the holes through the wedge then mounted it to the gun. No supports needed on the wedge.
This is a Rail mount for my Kassnar M16 to place on the bottom of the stock to mount a bipod. Included in the files is the rail (Thanks to LOTHANSTAR for this design) and the wedge, the stock is angled at the front so in order to level the mount the wedge has to be installed under the rail. the wedge is wider than the rail just cut to desired width, mainly i did that because calibration varies from printer to printer and i wanted to give you ample room for it to fit right. i installed it by superglueing the wedge to the rail after it dryed i drilled out the holes through the wedge then mounted it to the gun. No supports needed on the wedge.
Similar models
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Flash Hider by Ambeos5
...fits pretty snug no real need for a set screw but easy to drill a hole fore one. the design matches the barrel shroud i designed.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Barrel Shroud by Ambeos5
...ibration is you have have to adjust the hole bigger or so. it has holes in the tops of the rings for set screws if you need them.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 AR Style carry handle adapter rail by Ambeos5
...rry. this allowed me to mount the ar style carry handle to the gun , it needs around 50% infill considering it is a carry handle.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Tri-Rail Shield/Cover by Ambeos5
...ds to the community but i feel i have taken so much knowledge and things(lol) from you guys its time for me to start giving back!
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Riser for Holographic Sight by Ambeos5
...to add a middle set of posts to more evenly distribute the load. i will leave up both files so you can choose which one you want.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Ergo Grip by Ambeos5
...u use the originial grip screw i recommend you use a washer so it can be tightened down snug and not harm the facing on the grip.
thingiverse
free
Marlin 60 Picatinny rail adapter. by mrphotomanseattle
...le of zip ties. now you can easily mount bipods, flashlights, lasers, or any other accessory that uses the picatinny rail mount.
3dwarehouse
free
AR-15 DMR Version Black/Coyote
...4a1 #mod #modded #modifications #muzzle #rails #range #scope #short #silencer #sniper #stock #supressed #supressor #tac #tactical
thingiverse
free
TEVO Black Widow Stock Extruder Bowden Mount by iggut
...up. great for spool holders that sit on top of the printer.
i will update this as soon as i print and install this with pictures.
3dwarehouse
free
Usa Bipod RPK / version
...usa bipod rpk / version
3dwarehouse
m4a1 with bipod #bipod #m16 #m4a1 #rpk #usa #zackkoval
Kassnar
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Flash Hider by Ambeos5
...fits pretty snug no real need for a set screw but easy to drill a hole fore one. the design matches the barrel shroud i designed.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Barrel Shroud by Ambeos5
...ibration is you have have to adjust the hole bigger or so. it has holes in the tops of the rings for set screws if you need them.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 AR Style carry handle adapter rail by Ambeos5
...rry. this allowed me to mount the ar style carry handle to the gun , it needs around 50% infill considering it is a carry handle.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Ergo Grip by Ambeos5
...u use the originial grip screw i recommend you use a washer so it can be tightened down snug and not harm the facing on the grip.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Tri-Rail Shield/Cover by Ambeos5
...ds to the community but i feel i have taken so much knowledge and things(lol) from you guys its time for me to start giving back!
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Riser for Holographic Sight by Ambeos5
...to add a middle set of posts to more evenly distribute the load. i will leave up both files so you can choose which one you want.
thingiverse
free
Hi Point 995TS Barrel Shroud by Ambeos5
...thingiverse since i finished all the designs on my kassnar im working on my hi-point 995ts here is a...
Ambeos5
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Flash Hider by Ambeos5
...fits pretty snug no real need for a set screw but easy to drill a hole fore one. the design matches the barrel shroud i designed.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Ergo Grip by Ambeos5
...u use the originial grip screw i recommend you use a washer so it can be tightened down snug and not harm the facing on the grip.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Barrel Shroud by Ambeos5
...ibration is you have have to adjust the hole bigger or so. it has holes in the tops of the rings for set screws if you need them.
thingiverse
free
Remix-Direct Drive for TRONXY X5SA Pro 400 by Ambeos5
...e cable chain mounts they are the exact same i just put them here so you didnt have to goto multiple things to get all the parts.
thingiverse
free
Hi Point 995TS Barrel Shroud by Ambeos5
...se only 2 but im using 4 since ill be adding the laser later) this may work for the other models but i dont have them to test on.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Riser for Holographic Sight by Ambeos5
...to add a middle set of posts to more evenly distribute the load. i will leave up both files so you can choose which one you want.
thingiverse
free
Hi Point 995TS Muzzle Brake Addon for Shroud by Ambeos5
... a large hole for you to gain access to the bottom set screw and will be completely covered by the included rail. happy shooting!
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 AR Style carry handle adapter rail by Ambeos5
...rry. this allowed me to mount the ar style carry handle to the gun , it needs around 50% infill considering it is a carry handle.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Tri-Rail Shield/Cover by Ambeos5
...ds to the community but i feel i have taken so much knowledge and things(lol) from you guys its time for me to start giving back!
Armscor
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Flash Hider by Ambeos5
...fits pretty snug no real need for a set screw but easy to drill a hole fore one. the design matches the barrel shroud i designed.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Barrel Shroud by Ambeos5
...ibration is you have have to adjust the hole bigger or so. it has holes in the tops of the rings for set screws if you need them.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Riser for Holographic Sight by Ambeos5
...to add a middle set of posts to more evenly distribute the load. i will leave up both files so you can choose which one you want.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 AR Style carry handle adapter rail by Ambeos5
...rry. this allowed me to mount the ar style carry handle to the gun , it needs around 50% infill considering it is a carry handle.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Ergo Grip by Ambeos5
...u use the originial grip screw i recommend you use a washer so it can be tightened down snug and not harm the facing on the grip.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Tri-Rail Shield/Cover by Ambeos5
...ds to the community but i feel i have taken so much knowledge and things(lol) from you guys its time for me to start giving back!
thingiverse
free
100 Round .22 LR Tray by Niksal12
...use. the federal that i have fits tighter than armscor because it has a thicker rim overall. the loader...
sketchfab
$179
Ratel-90 (SANDF)
...ratel-90 (sandf) - buy royalty free 3d model by armscor studios...
cg_trader
$29
PBR ARMSCOR M1600 SA
...xtures: basecolor occlusionroughnessmetallic normal weapon gun rifle 22lr pbr lowpoly gameready modern unreal unity game military
Bingham
3dbaza
$3
Coffee Table Bingham (175208)
...coffee table bingham (175208)
3dbaza
coffee table bingham 3d model<br>brand: canora gray<br>diameter: 80cm
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Flash Hider by Ambeos5
...fits pretty snug no real need for a set screw but easy to drill a hole fore one. the design matches the barrel shroud i designed.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Riser for Holographic Sight by Ambeos5
...to add a middle set of posts to more evenly distribute the load. i will leave up both files so you can choose which one you want.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Tri-Rail Shield/Cover by Ambeos5
...ds to the community but i feel i have taken so much knowledge and things(lol) from you guys its time for me to start giving back!
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Ergo Grip by Ambeos5
...u use the originial grip screw i recommend you use a washer so it can be tightened down snug and not harm the facing on the grip.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 Barrel Shroud by Ambeos5
...ibration is you have have to adjust the hole bigger or so. it has holes in the tops of the rings for set screws if you need them.
thingiverse
free
Kassnar / ARMSCOR / Squire Bingham M16 AR Style carry handle adapter rail by Ambeos5
...rry. this allowed me to mount the ar style carry handle to the gun , it needs around 50% infill considering it is a carry handle.
cg_trader
$11
Four Hands Bingham Coffee Tables
...four hands bingham coffee tables
cg trader
ø600 x h450 mm.
cg_trader
$10
Vanguard Bingham Upholstered Game Table V126-GT
...v126-gt
cg trader
3d vanguard bingham upholstered game table v126-gt , formats max, obj, fbx, mtl, ready for 3d animation and ot
Bipod
turbosquid
$74
Bipod
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Bipod
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Bipods 01
...ee 3d model l96a1 bipods 01 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1338419)
turbosquid
$15
Bipod table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
bipod
...d
turbosquid
royalty free 3d model bipot for download as max on turbosquid: 3d models for games, architecture, videos. (1400425)
turbosquid
$25
3D Tactical Bipod model
...del 3d tactical bipod model for download as 3ds, max, and obj on turbosquid: 3d models for games, architecture, videos. (1447769)
turbosquid
$29
Rifle Bipod High-poly with Rig
...d hightpoly with rig for download as blend, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1562776)
3d_export
$5
chair---sued and bipod
...erer : vray.<br>/! the scene contains only the object i sell here. not the studio with vray light, environement and camera.
3d_export
free
The sniper rifle L115A3 hAVE THE SCOPE AND BIPOD ---
...bring peace on this earth and prevent world war 3. so that this model does not have to be kept in the battlefield in reality / /
3d_export
$15
Heavy Sniper Rifle 3D Model
...sniper rifle 3d model 3dexport heavy sniper rifle scope bipod heavy sniper rifle 3d model parman 40417...
M16
turbosquid
$17
m16
...m16
turbosquid
royalty free 3d model m16 for download as max on turbosquid: 3d models for games, architecture, videos. (1151185)
turbosquid
$3
M16
...m16
turbosquid
royalty free 3d model m16 for download as max on turbosquid: 3d models for games, architecture, videos. (1409586)
turbosquid
$9
M16
...d
royalty free 3d model m16 for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1222905)
turbosquid
$45
M16
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$35
m16
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$35
M16
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$35
M16
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
M16
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
m16
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
m16
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Squire
humster3d
$15
Squire Corsica Roadster 1936 Blueprint
...36 blueprint 3d model in the format you need. all our 3d models was created on real car base and maximally close to the original.
humster3d
$75
3D model of Squire Corsica Roadster 1936
...3d model of squire corsica roadster 1936 in various file formats. all our 3d models were created maximally close to the original.
cg_studio
$99
Ford Country Squire 1979-19913d model
...fbx .lwo .max .mb .obj - ford country squire 1979-1991 3d model, royalty free license available, instant download after purchase.
3d_ocean
$89
Ford Country Squire 1979-1991
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
humster3d
$75
3D model of Ford Country Squire 1979-1991
...d model of ford country squire 1979-1991 in various file formats. all our 3d models were created maximally close to the original.
3d_export
$7
servidor
...servidor 3dexport servidor squire technologies 1u...
3d_export
$99
Hyundai i20 3D Model
...hyundai i20 3d model
3dexport
hyundai i20 3d model squir 12044 3dexport
3d_export
$99
Scion xD 3D Model
...scion xd 3d model
3dexport
scion xd 3d model squir 11616 3dexport
3d_export
$99
Kia Cadenza 2014 3D Model
...kia cadenza 2014 3d model
3dexport
kia cadenza 2014 3d model squir 65590 3dexport
3d_export
$99
Seat Ibiza SportCoupe 3D Model
...seat ibiza sportcoupe 3d model
3dexport
seat ibiza sportcoupe 3d model squir 15626 3dexport
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)