Kanger Vape Tips for Subox / KBox by leeph

Last crawled date: 3 years, 2 months ago

Replacement vaping tips for Kanger Subox / Subox Mini / KBox
UPDATE 13/03/18 - Updated extended tip with in-model breakaway supports to help print the 'land' for the rubber o-ring. Also tweaked tolerances a little for better fit. Still, printed in anything other than PLA may need compensation for shrinkage.
Two different styles - first is almost identical to those supplied in the box, the other is an extended version with more comfortably shaped mouthpiece. Use original O-ring to seal.
Print with the mouth end flat on the bed in the Z-axis. 2 shells, 100% infill or similar. Print slowly for best results and print more than one at a time for best results otherwise it'll overheat printing the overhangs.
Print full scale in ABS or PETG, but if printing in PLA scale to 97% in X and Y axis to account for no shrinkage in that material.