Thingiverse
K8200 - Double Trapetzoid Z-axis Addon by Hexcode
by Thingiverse
Last crawled date: 4 years, 3 months ago
The idea is based on the Double Trapezoidal Z-Axis from Bondeus (http://www.thingiverse.com/thing:327966), but I improved some things I needed to get it working.
First of all there is a nut-holder (mutter.stl) - it's designed to fit an hexagonal trapezoidal nut (SW17L15, 17mm x 15mm). So it can be build into the brackets from Bondeus.
Than there is a spool holder which is based on the one from cypax, but it's 100mm in length, so that ne Nunus-filament spools fit on them.
Than there is the "stretcher" (spanner.stl) for using a 1210mm T5-Belt on Bondeus z-axis mod. It's based on the filament holder from szeedijk and the T5-18 Pulley from donboy. You need a 8mm screw, 3 nuts and a608zz ball bearings.
Put the ball bearing into the pulley and add it on the 8mm screw, add two of the nuts under it. Then push it trough the hole in the stretcher and secure it with the third nut.
I'll add some pictures later.
First of all there is a nut-holder (mutter.stl) - it's designed to fit an hexagonal trapezoidal nut (SW17L15, 17mm x 15mm). So it can be build into the brackets from Bondeus.
Than there is a spool holder which is based on the one from cypax, but it's 100mm in length, so that ne Nunus-filament spools fit on them.
Than there is the "stretcher" (spanner.stl) for using a 1210mm T5-Belt on Bondeus z-axis mod. It's based on the filament holder from szeedijk and the T5-18 Pulley from donboy. You need a 8mm screw, 3 nuts and a608zz ball bearings.
Put the ball bearing into the pulley and add it on the 8mm screw, add two of the nuts under it. Then push it trough the hole in the stretcher and secure it with the third nut.
I'll add some pictures later.