Thingiverse
Jumper 260+ quad conversion parts, New arms, FPV transmitter holder, Sony CCD camera conversion + misc by Vendeta44
by Thingiverse
Last crawled date: 3 years, 1 month ago
The new arms are designed to hold the ESC with just friction and a small dab of hot glue (no zip ties needed!) they also have an expected failure point (by design) at the posts to avoid transferring a hard impact onto the mainboard, built in 28mm motor guards. Note: These arms will also work with littlebee 20amp escs as they are the same width as the stock bhheli long 20amp escs with the jumper quad.
FPV transmitter is hot glued in with 1 or two zipties over top to keep it pressed down in the event of a hard crash. Keeps east access to dipswitch to change channel.
The new tilt mount holds the ever so popular sony CCD. Designed it to cradle the board as much as possible since the jumper frame provides 0 protection to the camera. Captures a standard nylon lock nut inside the case to tighten the camera on the pivot points.
Cone legs and antenna brackets are untested but no reason they won't work. Several mounting positions for the cone legs the screw in, you could thread right into the plastic or drill out for brass thread inserts if you prefer.
All of my parts use m3 machine screws and nuts, so you will need to drill out any of the mounting holes used with a 3mm bit or tap it with a 3mm tap to mount these parts.
Note about weight increase, with arms, transmitter bracket, sony ccd plus printed mount and receiver is 405g about 65 grams heavier than the kit with original pieces and no receiver. The 28mm motors with 6" props have 0 issue with that.
Side note about transmitter and camera connections, do yourself a favor and rip those junk ports off the board and replace them with servo leads if you haven't already
FPV transmitter is hot glued in with 1 or two zipties over top to keep it pressed down in the event of a hard crash. Keeps east access to dipswitch to change channel.
The new tilt mount holds the ever so popular sony CCD. Designed it to cradle the board as much as possible since the jumper frame provides 0 protection to the camera. Captures a standard nylon lock nut inside the case to tighten the camera on the pivot points.
Cone legs and antenna brackets are untested but no reason they won't work. Several mounting positions for the cone legs the screw in, you could thread right into the plastic or drill out for brass thread inserts if you prefer.
All of my parts use m3 machine screws and nuts, so you will need to drill out any of the mounting holes used with a 3mm bit or tap it with a 3mm tap to mount these parts.
Note about weight increase, with arms, transmitter bracket, sony ccd plus printed mount and receiver is 405g about 65 grams heavier than the kit with original pieces and no receiver. The 28mm motors with 6" props have 0 issue with that.
Side note about transmitter and camera connections, do yourself a favor and rip those junk ports off the board and replace them with servo leads if you haven't already
Similar models
thingiverse
free
Camera and TX mount for FPV 250 Quad by mperaltaoz
...era (32x32 mm) and a video transmitter with a standard antenna plug.
the mount bolts on the frame via 2 holes for 3mm bolts/nuts.
thingiverse
free
Bracket for Mini CCD FPV Camera by Hovership
...ini ccd cameras like: http://www.surveilzone.com/dc5v-plastic-case-sony-super-had-ccd-700tvl-mini-camera-2525mm-2.8mm-lens-hs1180
thingiverse
free
1/3-inch SONY CCD Video Camera Mount by Yoniweb
...t by yoniweb
thingiverse
this mount should fit most 1/3-inch sony ccd video cameras. this mount is perfect for fpv or uav usage.
thingiverse
free
FPV camera mount XAT600M HS1177 by redrobrc
...banggood.com/600tvl-2_8mm-lens-13-sony-super-had-ii-ccd-camera-for-fpv-racing-drone-palntsc-p-1086784.html?p=la1820677103201407rs
thingiverse
free
FPV Camera Mount CCD CAM by Dennis321
... d-wdr
http://www.kamera2000.com/cctv/download/cmr1385q-manual.pdf
note: distance between mounting holes is 27.5 mm.
enjoy!
thingiverse
free
FPV with sony 700 TVL CCD camera by budoc
...l ccd camera by budoc
thingiverse
box for fpv with sony 700 tvl ccd camera
the front and back was designed to be screw together.
thingiverse
free
FPV mount for [1/3-inch Sony CCD Video Camera 700TV Lines F1.2] Gopro compatible by spu
... camera 700tv lines f1.2 camera, used for fpv. it can easily be put on a gopro base mounting! moreover it is designd aerodynamic!
thingiverse
free
FPV RC Pan Mechanism by antpgomes
... it mounts straight on the suspension towers.
it uses a 38mm sony 1/3" ccd camera, 9g servo and a 1.2ghz video transmitter
thingiverse
free
FPV CCD camera and transmitter holder by Robo9
...fpv ccd camera and transmitter holder by robo9
thingiverse
to fit several models with fpv
thingiverse
free
Bracket for Mini CCD FPV Camera (Sky Plus) by radicalregard
...alregard
thingiverse
remix of hovership mini ccd fpv mount for sky plus camera found here http://shop.runcam.com/runcam-skyplus/
Vendeta44
thingiverse
free
Aperture Science Dual 18650 Box Mod by Vendeta44
...'t work for my purposes and the fire button hole was way to small. can be wired in series or parallel with room for a mosfet.
thingiverse
free
Turnigy 9XR Pro hidden wallmount by Vendeta44
...y djt module. friction fit accounting for abs shrinkage, so if you print in pla you may fight it a bit more sloppy than you want.
thingiverse
free
3d printed turn signals by Vendeta44
...he top most "lens cover" 4x m5 bolts to affix back plate to vehicle surface, and 4x m2 to fix lens cover to back plate.
thingiverse
free
C frame DNA 200 vape box mod by Vendeta44
...ly test printed, i can't get abs to stick to my bed to save my life. needs button caps. fits a dna 200 and a 3s 1300mah lipo.
thingiverse
free
Syma Quadcopter X5SW / X5C / X5C1 Stub legs by Vendeta44
...eight reduction) and over a inch shorter than the stock. they just clear the x5sw camera and should clear the x5c camera as well.
thingiverse
free
SteelSeries Arctis 5/6/7 Round Ear Cup adapter by Vendeta44
...er and spread the clamping force out a bit more. easily makes this headset 10x more comfortable, especially if you have big ears.
thingiverse
free
Star Fighter T16000 grips.
...tweaks. you can use a 5 way switch ot vendeta44#39;s ...
thingiverse
free
18350 Dna 30 micro mod by Vendeta44
... can design and release here.
donate here: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=z25evzalkdtwg
thingiverse
free
Universal Jeep Signal Mount - Jeep Grills / Trailers / Extra blinkers for mall crawlers by Vendeta44
...ks terrible, i'll update the post once i flexidip them black (maybe paint my grill, depending how ambitious i feel tomorrow).
thingiverse
free
G27 Splitter Shifter for Truck Simulator (Euro / American) by Vendeta44
... use glue if your confident you wont want to remove it.
in case you have any issues i've uploaded the source fusion 360 file.
Ccd
turbosquid
$8
CCD equipment
...quid
royalty free 3d model ccd equipment for download as ige on turbosquid: 3d models for games, architecture, videos. (1192914)
3d_export
$60
double station ccd detection machine
...any questions also you can email to me. designed with solidworks 2017, render with keyshot **************************************
3d_export
$10
mobile phone terminal punching ccd visual inspection packaging equipment
...packaging equipment
3dexport
mobile phone terminal punching, ccd visual inspection and packaging integrated automation equipment
3d_export
$9
ccd stamping mechanism
...r the purchase.<br>designed with solidworks 2017, render with photoview 360<br>**************************************
3d_export
$65
ccd detection assembly machine
... you can email to me.<br>designed with solidworks 2017, render with keyshot<br>**************************************
3d_export
$10
ffc soft flat wire punching machine and ccd visual inspection equipment
...on equipment
3dexport
mobile phone ffc blanking machine, ffc soft flat wire punching machine and ccd visual inspection equipment
3d_export
$9
ccd three-axis movement module
... you can email to me.<br>designed with solidworks 2017, render with keyshot<br>**************************************
3d_export
$300
tray auto-loading and lower-limit implantation automation uv dispensing and ccd inspection
...ct layout of the adhesive, stable amount, droplets, (tray disc product) module, tray automatic baggage, product, stack recycling.
3d_export
$7
Security Camera CCTV CCD
...gt;this model is suitable for use in broadcast, high-res film close-up, advertising, design visualization, etc...<br>enjoy!
3d_export
$100
laptop lock screw label integrator
...will absorb the label (ccd detection label) and the ccd detection tool location on the four-axis robot will attach...
Jumper
turbosquid
$19
Jumper
...y free 3d model jumper for download as 3ds, obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1172772)
turbosquid
$19
Commando Jumper
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Jumper Connector
...umper connector for download as 3ds, obj, fbx, blend, and dae on turbosquid: 3d models for games, architecture, videos. (1494917)
turbosquid
$25
Jumper Stargate atlantis
...ty free 3d model jumper stargate atlantis for download as obj on turbosquid: 3d models for games, architecture, videos. (1319632)
turbosquid
$6
Spaceship Fictitious Jumper
...free 3d model spaceship fictitious jumper for download as fbx on turbosquid: 3d models for games, architecture, videos. (1639207)
turbosquid
free
elect-jumpers-001
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
StarGate Atlantis Puddle Jumper
...e 3d model stargate atlantis puddle jumper for download as ma on turbosquid: 3d models for games, architecture, videos. (1711265)
3d_ocean
$18
Citroen Jumper Van rim
...ot physically accurate materials. it is separated on parts and they are correctly named. so it is easy to use and modify the m...
turbosquid
$39
Citroen Jumper Van wheel
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$29
Citroen Jumper Van rim
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Misc
turbosquid
$10
Misc. Signs.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Medieval Misc
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
misc furni.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Misc. models
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$69
Furnitures Misc Element
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
misc votive candles
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$5
HandPainted Pack1 Misc
...xure tileable wall wood
5 misc. handpainted textures - wood - dirt - forestroad - oldroad - wall all textures are 512 * 512 jpeg.
turbosquid
$10
Misc. Dining Items Collection
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$30
3d misc object collection3d model
...l
cgstudio
.3ds .c4d .obj - 3d misc object collection 3d model, royalty free license available, instant download after purchase.
turbosquid
$50
Airport Misc Pack (16 Models)
...ee 3d model airport misc pack (16 models) for download as fbx on turbosquid: 3d models for games, architecture, videos. (1320536)
260
3ddd
$1
Chairman 260
...chairman 260
3ddd
кресло , chairman
офисное кресло chairman 260
design_connected
$27
Conrad Sofa 260
...conrad sofa 260
designconnected
alberta conrad sofa 260 computer generated 3d model.
turbosquid
$1
Female 260, scan
...can
turbosquid
royalty free 3d model 260 for download as obj on turbosquid: 3d models for games, architecture, videos. (1242268)
turbosquid
$3
Zeus 260 3B
...y free 3d model zeus 260 3b for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1466406)
turbosquid
$3
tank object 260
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Sartory Rugs Nc-260
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$55
Condo 260 3D Model
...iture accessories complete full detailed photorealistic textures materials render ready
condo 260 3d model barmoon 42747 3dexport
3ddd
$1
Maggi Massimo / Буфет art. 260
...ть дверцу, переместите ползунок анимации в 100-й кадр.
приобрести можете здесьhttp://proekt-kuhni.ru/mebel/mm-260.html.
3d_export
$155
Building 260 3D Model
...terior resort hotel bank office center university college campus street landscape
building 260 3d model rosestudio 54593 3dexport
3d_export
$60
Architecture 260 3D Model
...lege campus max street landscape commercial building medical hospital offices
architecture 260 3d model lotusmodel 47919 3dexport
Transmitter
turbosquid
$69
Radio Control Transmitter Futaba T18MZ
... transmitter futaba t18mz for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1610924)
turbosquid
$20
IR-RF PLC USB TRANSMITTER 2014 RAW
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$17
Transmitter
...lications:<br>app interface localization.<br>accompanying text localization (descriptions, manuals, references etc.).
3d_export
$5
ultrasound sensor
...divided into three broad categories: transmitters, receivers and transceivers. transmitter convert electrical signals into ultrasound, receivers convert ultrasound into...
archive3d
free
Dish 3D Model
...dish 3d model archive3d satellite dish downlink transmitter satellite - dish - 3d model for interior 3d...
3d_export
$28
Mast phone 3D Model
...3dexport building structure telecom radio aerial antenna mast dish transmitter masts mobile phone mast phone 3d model tartino 1961...
3d_export
$42
Vanguard III Satellite 3D Model
...project vanguard rocket navy satellite optical sensors weather relay transmitter space orbit vanguard iii satellite 3d model visualmotion 85062...
3d_export
$41
Vanguard I Satellite 3D Model
...project vanguard rocket navy satellite solar panel weather relay transmitter space orbit vanguard i satellite 3d model visualmotion 85060...
3d_export
$41
Vanguard II Satellite 3D Model
...rocket navy satellite solar panel optical sensors weather relay transmitter space orbit vanguard ii satellite 3d model visualmotion 85061...
3d_export
$89
Walkie Talkie Collection 3D Model
...walkie talkie collection 3d model 3dexport transceiver transmitter walkie-talkie walkietalkie voice communications radio station antenna cell phone...
Sony
3ddd
$1
Sony
...sony
3ddd
sony , телевизор
телевизор sony подставкой колонкой и сабуфером 55"
3ddd
$1
Джойстик Sony
...джойстик sony
3ddd
джойстик , sony
джойстик sony
3ddd
$1
Sony camera
...sony camera
3ddd
sony , камера
sony camera
3ddd
$1
sony ericsson
...sony ericsson
3ddd
sony ericsson , телефон
sony ericsson
3ddd
$1
Sony F35
...sony f35
3ddd
sony , камера
камера sony f35
3ddd
$1
Sony-W300
...sony-w300
3ddd
sony , фотоаппарат
фотокамера sony-w300+текстуры
3ddd
free
Монитор Sony
...монитор sony
3ddd
sony , монитор
монитор sony, текстуры есть
3ddd
$1
Фотоаппарат Sony
...ony , фотоаппарат
фотоаппарат sony p150. неплохое качество. текстуры в vray прилагаются.
3d_export
$5
sony headphones
...sony headphones
3dexport
sony headphones modeling in blender
turbosquid
$59
Sony
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Fpv
turbosquid
$1
FPV VTX Antenna
...e 3d model fpv vtx antenna for download as obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1230317)
3d_export
$9
Fpv logo 3D Model
...onogram vehicle part of auto transport 3d model logo emblem detailed high quality badge
fpv logo 3d model rmodeler 59628 3dexport
3d_export
$8
dji fpv battery slot holder
...er for 3 dji fpv batteries. holds perfectly without shaking. need 1 m3 countersunk head bolt. need to print 6 pin, 1 case, 1 cap.
3d_export
$10
fpv camera hd 700tvl
...aterials are logically named<br>the main format is in 3ds max 2009.<br>satisfcation garranteed..<br>thank you !
thingiverse
free
FpV Mount (SOPORTE FPV) by elborjas1987
...fpv mount (soporte fpv) by elborjas1987
thingiverse
this is a fpv mount with the same holes of naza base.
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
fpv by tbutera
...fpv by tbutera
thingiverse
fpv
thingiverse
free
FPV DRONE ROOSTER DJI FPV PART
...fpv drone rooster dji fpv part
thingiverse
fpv drone rooster dji fpv install part
thingiverse
free
FPV monitor
...tml?rmmds=myorder&cur_warehouse=cn
link for download : https://cults3d.com/fr/mod%c3%a8le-3d/divers/fpv-monitor-ecran-fpv-faf
thingiverse
free
FPV receiver mount for FPV display by petrex
...eceiver mount for fpv display by petrex
thingiverse
aomway receiver mount for field view 777 fpv monitor. with small cable tray.
Conversion
3ddd
$1
Conversation Seat
...шетка
the conversation seat made in englandhttp://www.squintlimited.com/products/the_conversation_seat/gold
+ max 2011
3d_export
$10
Converse 3D Model
...converse 3d model
3dexport
converse shoe pc unix mac
converse 3d model electropainter17075 38067 3dexport
turbosquid
$100
converse-shoe
...quid
royalty free 3d model converse-shoe for download as c4d on turbosquid: 3d models for games, architecture, videos. (1398427)
turbosquid
$10
Conversation Furniture
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
Converse Allstars
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
design_connected
$16
Conversation Club Chair
...conversation club chair
designconnected
donghia conversation club chair chairs computer generated 3d model. designed by n/a.
design_connected
$27
Hemicycle Conversation Chair
...rsation chair
designconnected
ligne roset hemicycle conversation chair computer generated 3d model. designed by nigro, philippe.
3d_export
$24
Converse keds 3D Model
...converse keds 3d model
3dexport
converse all star ked shoe clothes sports
converse keds 3d model vermi1ion 26201 3dexport
3ddd
$1
Converse All-Star Shoes
...converse all-star shoes
3ddd
кеды , обувь
converse all-star shoes
design_connected
$18
CONVERSE Jack Purcell Sneakers
...converse jack purcell sneakers
designconnected
converse jack purcell sneakers computer generated 3d model.
Quad
design_connected
$4
Quad
...quad
designconnected
brent comber quad computer generated 3d model. designed by comber, brent.
turbosquid
free
Quad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$69
Quad bike
...uad bike
3docean
bike hi-poly moto quad quad bike quadbike
high-poly model quad bike. model uses mental ray materials and render.
3d_export
$14
quad bike
...quad bike
3dexport
3d_export
$50
Quad 3D Model
...quad 3d model
3dexport
quad atv
quad 3d model floris 64690 3dexport
turbosquid
$8
Space quad
...bosquid
royalty free 3d model space quad for download as stl on turbosquid: 3d models for games, architecture, videos. (1366239)
turbosquid
free
Ornament quad
...quid
royalty free 3d model 3d ornament quad for download as on turbosquid: 3d models for games, architecture, videos. (1628075)
turbosquid
$19
Quad Drone
...
royalty free 3d model quad drone for download as c4d and fbx on turbosquid: 3d models for games, architecture, videos. (1202459)
turbosquid
$150
Quad bike
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$119
Lego quad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Arms
archibase_planet
free
Arm
...ase planet
arm hand right hand skeleton
arm human skeleton right arm n030515 - 3d model (*.gsm+*.3ds+*.max) for 3d visualization.
3ddd
$1
arm chair
...arm chair
3ddd
arm chair , пуф
arm chair
turbosquid
$5
arm
...arm
turbosquid
royalty free 3d model arm for download as obj on turbosquid: 3d models for games, architecture, videos. (1306158)
turbosquid
free
Arm
...arm
turbosquid
free 3d model arm for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1346955)
turbosquid
$29
Arm
...osquid
royalty free 3d model arm for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1382436)
3d_export
$5
coat of arms
...coat of arms
3dexport
coat of arms
3ddd
$1
ARM SOFA
...arm sofa
3ddd
arm sofa
3ddd
$1
Arm chair
...arm chair
3ddd
arm chair
3ddd
$1
Arm chair
...arm chair
3ddd
угловое
arm chair
3ddd
$1
ARM CHAIR
...arm chair
3ddd
arm chair clothes
Camera
archibase_planet
free
Camera
...base planet
camera surveillance camera video camera
camera surveillance n090211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...hibase planet
camera security camera video camera
camera security n210515 - 3d model (*.gsm+*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...se planet
camera web camera webcam
camera butterfly usb pc camera n090713 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...mera
archibase planet
surveillance camera video camera camcorder
camera n011211 - 3d model (*.3ds) for exterior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera digital camera
camera canon digital n041211 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...camera
archibase planet
camera film camera phototechnique
camera n100214 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...amera
archibase planet
camera video camera camcorder
camera video n070315 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...rchibase planet
camera video camera camcorder
camera studio n101213 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Camera
...ibase planet
digital camera camera phototechnique
camera canon ixus 400 n310311 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Camera
...ase planet
photocamera video camera camera
camera sony t300 black n291010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Holder
archibase_planet
free
Holder
...holder
archibase planet
holder toilet paper holder
holder paper n070712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...e planet
holder rack toilet paper holder
holder toilet roll n240715 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pen holder support prop
pen holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
pole post holder
сhurch cross pole holder - 3d model for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder bathroom ware
shower holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...oilet paper holder
holder paper devon&devon; time black n241113 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder hanger hanger for towel
holder 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...holder
archibase planet
holder towel rack towel-horse
holder - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Holder
...lder
archibase planet
holder hanger hanger for towel
holder towel n250912 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
New
turbosquid
$119
New New Beetle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
New-feather
...new-feather
3dexport
new-feather
3d_export
$6
new style
...new style
3dexport
new style room
3ddd
free
New Items
...ew items
3ddd
new items , барный
барный стул от китайского производителя фирмы new items
3d_export
$6
Logo new
...logo new
3dexport
new american style logo
3d_export
$10
New jersey
...new jersey
3dexport
new jersey stp and stl format
design_connected
$20
New Deal
...new deal
designconnected
new deal computer generated 3d model.
3d_ocean
$15
New bed
... for this bed all this file format include in zip file 3ds,obj,max,zip file change material and re-size very easy very for render
3ddd
free
Sofa-New Classic
...sofa-new classic
3ddd
new classic
sofa,new classic
design_connected
$13
New Antiques
...new antiques
designconnected
cappellini new antiques computer generated 3d model. designed by wanders, marcel.
Parts
3d_export
$5
Parts
...parts
3dexport
parts
3d_export
$5
Part
...part
3dexport
part
3d_export
$5
Part
...part
3dexport
machine part
3d_export
$65
Part
...part
3dexport
simple rendering of the scene file
3d_export
$65
Part
...part
3dexport
simple rendering of the scene file
3d_export
$30
fan part
...fan part
3dexport
this is a part of fan of pedastal
3d_export
$10
machine parts
...machine parts
3dexport
3d part modeling work ,contact for 3d work
turbosquid
$59
Mechanical Part
...id
royalty free 3d model mechanical part for download as c4d on turbosquid: 3d models for games, architecture, videos. (1410833)
turbosquid
$17
Road parts
...bosquid
royalty free 3d model road parts for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1192967)
turbosquid
$9
Cutter Parts
...squid
royalty free 3d model cutter parts for download as stl on turbosquid: 3d models for games, architecture, videos. (1220010)