Thingiverse
JT ER2 Horizontal Fixed Feed
by Thingiverse
Last crawled date: 5 years, 10 months ago
Horizontal fixed feed tube for JT ER2 paintball gun
Use the feedneck cutter template to saw off the stock feed tube at an angle and drill a mounting hole (3/16" drill bit).
Print the thing. Try at a 45 degree angle with raft and supports. (see picture for reference)
The feed is designed to use a sock-lock feedgate
the front of the feed snaps into the hole you drilled on the feedneck, and you need a bolt and nut to attach the rear to the gun's beavertail
Use the feedneck cutter template to saw off the stock feed tube at an angle and drill a mounting hole (3/16" drill bit).
Print the thing. Try at a 45 degree angle with raft and supports. (see picture for reference)
The feed is designed to use a sock-lock feedgate
the front of the feed snaps into the hole you drilled on the feedneck, and you need a bolt and nut to attach the rear to the gun's beavertail