JoyCon style Pro controller Dpad by TheOneTrueAtackhelicopter

Last crawled date: 4 years, 3 months ago

A fix for the dpad miss inputs. Example: https://www.youtube.com/watch?v=Ny59RKSGcuY&ab_channel=startoss (not my video just an example I found clearly showcasing the issue)
Print slowly with maximum detail possible, and supports on. This reduces the ghosting and jitter artifacts that can cause the buttons to get stuck. For one controller you need 4 button pieces and 1 retention plate. I recommend going in after and very lightly sanding the edges of the buttons and the edges of the openings on the retention plate to reduce friction and chances of the buttons getting stuck depressed.
In the photo of the buttons you can see an unprocessed part. The wispy strings should be sanded off prior to install.
Known issues:
Elephants Foot on the buttons will cause issues and require sanding.
The connecting skin is 1 layer thick and cannot be strengthened due to tolerance issues. So use caution when removing supports.