Joybox by benmarte

...rse its just a flexible holder for the switch joycons. you can transport or store them. use support only for the base. have fun!

...i can't be lazy and not hook the joycons to my switch to recharge them when i am done. the actual model will let you be lazy.

...d joycon at their side or however is most comfortable. i made this so i can better play my switch in bed while laying on my side.

... add it in your design to interface a joycon to your project or just use it as is and sticking it where ever you want. enjoy-con

... them from randomly disconnecting. i printed these in petg for better durability, but there is no reason that pla would not work.

...ue, just scale the joycons slightly to compensate. too lazy to print your own? order one here: http://store.rabbitengineering.com

... let me know your thoughts, thanks to both other creators for sharing their files without them this would not be possible. enjoy.

... box to hold your joycons to protect them from harm in transport. currently the rails are too tight and the conter post is flimsy

...switch. this makes the feel of splatoon 2 very similar to the original splatoon. i have not printed this...

...nce the print finishes. i claim no responsibility if you screw up your joycons with this print. so far, mine have seen no issues.

...s,etc) by israngkul thingiverse just simple box design i used wood filament for art-look and petg for pills and food grade use.

...board and the 2 speakers of my old speaker https://www.amazon.es/reproductor-joyboxbluetooth-guitar-biwond/dp/b00t9qinwi/ref=asc_df_b00t9qinwi/?tag=googshopes-21&linkcode=df0&hvadid=54542048595&hvpos=1o1&hvnetw=g&hvrand=14740154748934819845&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=20295&hvtargid=pla-195099534795&psc=1 and will add 2 extra speakers and connect them...

... / 6v box i made this box for my solar-powered raspberry pi zero w camera the box fits a voltaic systems v25 6,400mah power bank.

...s just print with supports from the bed no need to do any post-processing to clean the vents etc. just print and mount it, enjoy.

....6mm as recommended by wham bam print in your favorite material and install and remember to re-level your printers z-axis. enjoy.

... let me know your thoughts, thanks to both other creators for sharing their files without them this would not be possible. enjoy.

...older to attach to those slots and place it on the side of the printer and still be able to access all ports and slots of the pi.

...r best durability since these can be a bit tight when placing them on the switch and need a decent amount of force to be removed.

...ny questions or comments let me know, i hope you enjoy this model and can now print some exotic filaments using a flexion ht kit.

...jgr526 the creator of the comfort handles which i used to create this remix, without his initial work this would not be possible.

... improvement that can be made to the model so any help is appreciated. how can i contact you? your best bet is twitter: @benmarte