Thingiverse
JGAurora Upgrades by mrmaint
by Thingiverse
Last crawled date: 4 years, 5 months ago
I recently bought a JGAurora 3-D printer. I thought the rear screen cover needed to be updated to hide the wires and to include a guide slot for the SD card.
I also made a couple of safety covers for the pinch points of the belt and pulleys that move the y-axis.
I use Maker'sGeek filament, so I made a spool hub that fits Maker'sGeek spools.
I made bearing holders for securing the top end of the z-axis ACME threaded rods. These use two 608zz bearings.
I made a tool and parts box that mounts under the print bed. You can actually put one of these on each side, so print two of them.
I also made a couple of safety covers for the pinch points of the belt and pulleys that move the y-axis.
I use Maker'sGeek filament, so I made a spool hub that fits Maker'sGeek spools.
I made bearing holders for securing the top end of the z-axis ACME threaded rods. These use two 608zz bearings.
I made a tool and parts box that mounts under the print bed. You can actually put one of these on each side, so print two of them.