Thingiverse
JGAURORA A5 PICAM_MOUNT by indyToronto
by Thingiverse
Last crawled date: 3 years, 2 months ago
20180214 - Print the bolts at 90%+ infill or they can break. Alternately, you can use a metal M8 bolt and nuts/washers.
20180215 - Added a thicker version of the picamMount. V2 is thicker and should be stiffer and vibrate less with movement.
I want my picam to move with the bed so I needed a place to clamp the picam mount into.
So I designed a set that swivels. Note you still need M2 bolt and nut for the camera as I can't design an M3 bolt and nut that works in plastic.
There is a installation guide STL - DONOT PRINT THIS. It's just to show you how to install the parts. The basic parts that you need can be printed from the BASESET (no brim no raft) and BOLS_N_WASHERS (brim).
I printed this in 0.1mm. The infill I used was 50% mainly for the bolts to be stronger, if you use wall of 1.2mm, the infill for the other parts may be lower.
20180215 - Added a thicker version of the picamMount. V2 is thicker and should be stiffer and vibrate less with movement.
I want my picam to move with the bed so I needed a place to clamp the picam mount into.
So I designed a set that swivels. Note you still need M2 bolt and nut for the camera as I can't design an M3 bolt and nut that works in plastic.
There is a installation guide STL - DONOT PRINT THIS. It's just to show you how to install the parts. The basic parts that you need can be printed from the BASESET (no brim no raft) and BOLS_N_WASHERS (brim).
I printed this in 0.1mm. The infill I used was 50% mainly for the bolts to be stronger, if you use wall of 1.2mm, the infill for the other parts may be lower.
Similar models
thingiverse
free
PiCam 1.3 Mounting Plate and GoPro Style Mount by CuriousSteve
...you can use the same nylon nuts and bolts that came with the camera. alternatively you will need 4 x m2x12 bolts and 4 x m2 nuts.
thingiverse
free
Bolt Handle by conorwalsh
...d into the model using a hammer.
i printed the model at 100% infill to make it strong and so that the bolt wouldn't ring out.
thingiverse
free
Monoprice Mini Select PiCam Mount by indyToronto
...t at 80% infill is the m8x15mm bolt. others can be printed at 20% - or if you rally want them stiffer, use 1.2mm for wall width.
thingiverse
free
Extruder Arm / Filament Release / Extruder Button Anet A8 by Hoogen
...o make it as strong as possible but feel free trying different infill percentages.
printed with a brim but it may not be needed.
thingiverse
free
Kupplungsquerträger Tamiya 1:14 by smber93
...wo holes to the left and right.
you need 6 m3x10mm bolts and m3 hex nuts do install.
now you can install a coupling at your truck
thingiverse
free
Butterfly Nut M6 by wisestone
...orange filament, with 0.2mm layer height and 15% infill on a prusa i3 mk3s printer.
i hope you can find this design useful, too.
thingiverse
free
Phone Mount Clamp Bolt and Nut by eleatom
...d tested these two parts and they work well.
if the bolt shows in half in the slicer, you can use these and they will work fine.
thingiverse
free
Coffee Mug Holder by daninamiri
...of the hook must be horizontal to the printing bed)
feel free to remix it as much as you can so it can fits your needs.
enjoy it!
thingiverse
free
Angle Measurement Tool by romerohe
...'s heads, so it lays perfectly on a flat surface.
i've printed the rulers with 20% infill and bolts/nuts with 60% infill.
thingiverse
free
Y motor bracket (Creality CR-10) by noinkprint
...the bracket to the frame of the printer.
this part is designed to print with no support.
i've used 75% infill.
material: pla.
Indytoronto
thingiverse
free
688 bearings (with fusion360) by indyToronto
...n 360 example file.
you can look at the included f3d file in fusion360 to see that this is a very easy and simple design to make.
thingiverse
free
608 bearings by indyToronto
... layer height in monoprice select mini and 0.2mm on a cr-10. either layer height will work.
i used infill of 33% just in case.
thingiverse
free
Spool Adapter : 51mm to 32mm Rod by indyToronto
...ount properly onto the rod.
it fits esun, cctree and most of the spools i use. measure the id of your spool before printing it.
thingiverse
free
625 Bearings by indyToronto
... don't even try this for fast regular movements that require a real bearing, but it should be useful for things like drawers.
thingiverse
free
PICAM Mount : CR-10 by indyToronto
...gh to tighten.
note i used esun pla+ to print this at 0.2mm.
you will also need some m2 bolts and nuts to mount the picam here.
thingiverse
free
Monoprice Mini Select PiCam Mount by indyToronto
...t at 80% infill is the m8x15mm bolt. others can be printed at 20% - or if you rally want them stiffer, use 1.2mm for wall width.
thingiverse
free
JG Aurora A5 Levelling Knob by indyToronto
... this is so i don't have to use superglue. if this is too tight for you, try to scale it up by 2% and then superglue it in.
thingiverse
free
Simple Clamp Tool for Tolerance Test by indyToronto
...ave other uses. if you figured out other uses for it, leave me a note.
btw, i printed mine at 90% infill. no support, no raft.
thingiverse
free
XYZ Calibration Cube - 4mm OD tube cutting jig by indyToronto
...the cut area should be perfectly at right angle if your knife is sharp.
so this is a calibration cube that is also a useful tool.
Picam
thingiverse
free
Picam Holder
... holder
thingiverse
this is a picam holder compatible with the modular mounting system https://www.thingiverse.com/thing:2194278
thingiverse
free
picam hypercube by marko87
...picam hypercube by marko87
thingiverse
support pour picam hypercube evolution
thingiverse
free
PiCam 2 Focus tool
...picam 2 focus tool
thingiverse
focus tool for the picam 2
thingiverse
free
Picam support for Ender 3
...picam support for ender 3
thingiverse
picam support for ender 3 printer.
based on octoprint support.
printed in pla, no supports
thingiverse
free
PiCam SG90 servo mount by Inventoteca
...picam sg90 servo mount by inventoteca
thingiverse
mount the picam rev 1.3 to a sg90 servo.
thingiverse
free
Support GoPro/Picam Ender 3
...support gopro/picam ender 3
thingiverse
support de camera gopro ou picam
thingiverse
free
360 PiCam Zero by ssaratks
...e
the model was designed to provide a 360 view of the picam. it has two versions,
with snap lock system
without snap lock system
thingiverse
free
CR6 SE PiCam Right Mount by evotodi
...avel.
try this wrench.
2021-03-24: there is a new updated version coming out soon with an articulated arm for better positioning.
thingiverse
free
The Mountster for PiCam by enekomontero
...erse
the camera can be screwed in place using the two holes on the side of the lens and there is an opening for the focus light.
thingiverse
free
Zortrax Raspberry PiCam support by swatre
...not for octopi not compatible with zortrax.
other parts to fix the raspberry pi on zortraxhttp://www.thingiverse.com/thing:611270
Jgaurora
thingiverse
free
accessorio JGAURORA by raffaelemobile
...accessorio jgaurora by raffaelemobile
thingiverse
stampato con jgaurora a3s riempimento 10% pareti 0.8
thingiverse
free
JGAurora Filament Guide by coogle
...jgaurora filament guide by coogle
thingiverse
a simple filament guide for the jgaurora printer
thingiverse
free
JGAURORA A5 z stabilizer
...jgaurora a5 z stabilizer
thingiverse
jgaurora a5 z stabilizer
roller size 22mm
thingiverse
free
LED Light for JGAurora A5
...led light for jgaurora a5
thingiverse
a light for jgaurora a5 made with led stripes and l-profile as a holder.
thingiverse
free
spring guid Jgaurora A5 by delichoc45
...spring guid jgaurora a5 by delichoc45
thingiverse
guide ressort jgaurora a5
thingiverse
free
JGAurora A5 side toolbox by P_Erhard
...jgaurora a5 side toolbox by p_erhard
thingiverse
toolboxes that clip into the side of the jgaurora a5 frame.
thingiverse
free
JGAURORA A5s Display Cover by nethunter27
...jgaurora a5s display cover by nethunter27
thingiverse
this is a jgaurora a5s displaycover.....from my printer,and my design!
thingiverse
free
Calibration Tool for JGAurora A1
...oon...
visit our jgaurora mkii upgrades group here at thingiverse:https://www.thingiverse.com/groups/jgaurora-mk2-upgrades/things
thingiverse
free
SKR mount for JGAURORA A5S
... hold the skr 1.3 control board to the posts in the jgaurora a5s chassis. holds a 40x10 fan for airflow across driver heatsinks.
thingiverse
free
m8 bowden connector for jgaurora a5 by death4u
...coupler for on the extruder of my jgaurora a5 broke. the original design had m6 and m10 couplers but the jgaurora a5 needed a m8.
A5
thingiverse
free
Audi A5 by 3DEwo
...audi a5 by 3dewo
thingiverse
audi a5
thingiverse
free
Présentoir documentations A5
...présentoir documentations a5
thingiverse
porte document au forma a5
thingiverse
free
Top hose lock for JGAurora A5, A5s, A3, A3s by EUREKTechnology
...ingiverse
top hose lock for jgaurora a5, a5s, a3, a3s
designed by: https://eurek.org
donations: http://paypal.me/eurektechnology
thingiverse
free
A5 Blade Trigger by Numbskull_ZA
...a5 blade trigger by numbskull_za
thingiverse
a5 blade trigger
thingiverse
free
keychains - Audi A5 by 3DEwo
...keychains - audi a5 by 3dewo
thingiverse
keychains - audi a5
thingiverse
free
A5 binder by Lapkritis
...a5 binder by lapkritis
thingiverse
a5 binder to put some girly stuff for one bachelorete's party.
thingiverse
free
Samsung A5 stand by lio_
...samsung a5 stand by lio_
thingiverse
samsung galaxy a5 basic stand
thingiverse
free
JGAurora A5S A5 A1 temp tower test 180 220 by dimy_5
...simple temperature calibrate pla test with different bridging lenght remixed for jgaurora a5s, but can be used also for a5 and a1
thingiverse
free
JGAURORA A5 z stabilizer
...jgaurora a5 z stabilizer
thingiverse
jgaurora a5 z stabilizer
roller size 22mm
thingiverse
free
Atomstack A5 Foot by ccarmody5
...atomstack a5 foot by ccarmody5
thingiverse
these are feet that i made to hold my atomstack a5 laser in place.
Mount
thingiverse
free
Pen Mount on BLTouch mount by jetspot
...pen mount on bltouch mount by jetspot
thingiverse
pen mount on bltouch mount
thingiverse
free
RAM Mount, Mount by seanmclean
...ram mount, mount by seanmclean
thingiverse
bridging plate to attach ram mount to yamaha 242, for chartplotter placement.
thingiverse
free
Mount for mount for Garmin GPS by GNOBLIN
...you can use this mount for prevent rotation simple mount around hendelbars.
d handelbar 31.8mm
use m3 screw and din 16903 plug.
thingiverse
free
Permanent mount for Modular Mounting System by WIR14
...permanent mount for modular mounting system by wir14
thingiverse
permanent mount for modular mounting system.
thingiverse
free
Gopro Mount and antenna mount by SuperYoyo
...gopro mount and antenna mount by superyoyo
thingiverse
cut the carbon platform to pass the gopro mount and enjoy !
thingiverse
free
Hexagon Mount for 50mm Mount (Sparkcube) by Draman
...for 50mm mount (sparkcube) by draman
thingiverse
hexagon mount remix from skimmys hotend-mount for sparkcube or other 50mm-mount
thingiverse
free
mount by gixster
...mount by gixster
thingiverse
custom mount
thingiverse
free
Mount by Matrxi999
...mount by matrxi999
thingiverse
shelf mount
thingiverse
free
Motor mount
...motor mount
thingiverse
motor mount
thingiverse
free
GoPro Mount
...gopro mount
thingiverse
gopro mount