Thingiverse
![Jetboat by georgdoll](/previews/8722017.jpg)
Jetboat by georgdoll
by Thingiverse
Last crawled date: 3 years, 1 month ago
This JetBoat is a remix inspired by the great work or wersy, I recommend reading his build instructions ! : http://www.thingiverse.com/thing:930577 Speed Boat 3 RC
This design remake features a jet propulsion.
As a bearing for the propeller shaft, I'm using an 8 mm brass rod that I drilled a 4 mm hole into. You'll need 2 pices one in the boat mounted one in the nozzle.
The propeller shaft is a 4 mm brass rod.
You might need to design your own engine, servo and battery mount fitting your parts.
Tip, the center of the propeller shaft is 22mm above the keel.
I've included a 3D Printed Propeller. it's "useable" and used in the video, but it's fare from optimal, it's probably better to buy one... however it does work.
The coupler however... make one out of brass ... the 3D printed is fine for a prototype, but don't rely on it.
Have Fun rebuilding the boat, make some photos and videos and share them!
Here's a video on Youtube : https://youtu.be/HfhmLER2pCo
Here's the make w/o the STL files http://www.thingiverse.com/make:265357
You'll find the STL files for the cover at : http://www.thingiverse.com/thing:930577 they fit unmodified ;)
Here's a practical servo mount : https://www.thingiverse.com/thing:3234221
A rather successfull rebuild : https://www.youtube.com/watch?v=0tKGmv5ApTE&t=209s
Yet another scaled up rebuild : https://www.youtube.com/watch?v=iI5PZeeofO0
Cool to see the design beeing used :)
This design remake features a jet propulsion.
As a bearing for the propeller shaft, I'm using an 8 mm brass rod that I drilled a 4 mm hole into. You'll need 2 pices one in the boat mounted one in the nozzle.
The propeller shaft is a 4 mm brass rod.
You might need to design your own engine, servo and battery mount fitting your parts.
Tip, the center of the propeller shaft is 22mm above the keel.
I've included a 3D Printed Propeller. it's "useable" and used in the video, but it's fare from optimal, it's probably better to buy one... however it does work.
The coupler however... make one out of brass ... the 3D printed is fine for a prototype, but don't rely on it.
Have Fun rebuilding the boat, make some photos and videos and share them!
Here's a video on Youtube : https://youtu.be/HfhmLER2pCo
Here's the make w/o the STL files http://www.thingiverse.com/make:265357
You'll find the STL files for the cover at : http://www.thingiverse.com/thing:930577 they fit unmodified ;)
Here's a practical servo mount : https://www.thingiverse.com/thing:3234221
A rather successfull rebuild : https://www.youtube.com/watch?v=0tKGmv5ApTE&t=209s
Yet another scaled up rebuild : https://www.youtube.com/watch?v=iI5PZeeofO0
Cool to see the design beeing used :)
Similar models
thingiverse
free
![Speed boat remix by Valsorimkubin](/t/8782405.jpg)
Speed boat remix by Valsorimkubin
...ed boat here: http://www.thingiverse.com/thing:930577 for motor 2830 and 80x45 propeller. i added waterproof box for electronics.
thingiverse
free
![Servo mounted Z-endstop arm for auto bed leveling. by matador](/t/9010005.jpg)
Servo mounted Z-endstop arm for auto bed leveling. by matador
.../www.thingiverse.com/thing:261249
here's a video of my bed leveling in action :) http://www.youtube.com/watch?v=ckyem767t9g
thingiverse
free
![Drogerdy 2.0 by timmiclark](/t/8941160.jpg)
Drogerdy 2.0 by timmiclark
... this robot has been superseded by this one:
http://www.thingiverse.com/thing:1906831
https://www.youtube.com/watch?v=o4d4ubk1lhc
thingiverse
free
![Servo Mount with Servo Linkage by bjepson](/t/9061894.jpg)
Servo Mount with Servo Linkage by bjepson
...o make robot arms that can have servos at one end:
http://www.thingiverse.com/thing:6714
andhttp://www.thingiverse.com/thing:8131
thingiverse
free
![TOM Tri-Track triple servo robot tank chassis by masneyb](/t/8865251.jpg)
TOM Tri-Track triple servo robot tank chassis by masneyb
...ld it between the drivetrain servos.
note: i did not create these 3d models. they were created by the other projects listed here.
thingiverse
free
![Dual Servo Modular Mount Adaptor by ostopme](/t/8302328.jpg)
Dual Servo Modular Mount Adaptor by ostopme
...eeded to be passed through netfabb to ensure that it rendered correctly in openscad, so i've included that file here as well.
thingiverse
free
![Tom's RC Motorboat by jbr](/t/9034960.jpg)
Tom's RC Motorboat by jbr
...ler (at the end of the shaft) like the one i found here : http://www.thingiverse.com/thing:15354 (double sized to fit the scale).
thingiverse
free
![Micro Robot arm (9g Micro Servo) see video by bentommye](/t/9048145.jpg)
Micro Robot arm (9g Micro Servo) see video by bentommye
...mykpcgg
programming:http://www.youtube.com/watch?v=7hbvyaewg5i
code:https://github.com/bentommye/micro_robot_rc_servo_ir_remote
thingiverse
free
![RC Blocked Diff - V2 - 608 bearings by viorelspinu](/t/8804258.jpg)
RC Blocked Diff - V2 - 608 bearings by viorelspinu
...rinter). to block the gears on the shaft, check my 'steel version rod' design - http://www.thingiverse.com/thing:1705088
thingiverse
free
![Rounded 40mm Fan Mount for NEMA 17 by Georgewchilds](/t/9050292.jpg)
Rounded 40mm Fan Mount for NEMA 17 by Georgewchilds
...he build. wait a few seconds to see the mount centered in the video:
http://www.youtube.com/watch?v=ohoynmlktcy&feature=plcp
Jetboat
3d_export
$10
![DJCK Speedboat 3D Model](/t/41283.jpg)
DJCK Speedboat 3D Model
...djck speedboat 3d model 3dexport jetboat generic fast water turbine djck speedboat 3d model djcrazykorry...
thingiverse
free
![3D printed Jetsprint jetboat by JothamB](/t/8532274.jpg)
3D printed Jetsprint jetboat by JothamB
... i know many people still use thingiverse so here's the link:
https://www.youmagine.com/designs/prototype-jetsprint-jet-boat
renderosity
$7
![Crater Jetboat](/t/3388261.jpg)
Crater Jetboat
...p to 2000 x 2000) <br />
<br />
poser 6+ material presets (mc6)<br />
poser 6+ material poses (pz2)</p>
blendswap
free
![Roughnecks Starship Troopers Jetboat](/t/2915336.jpg)
Roughnecks Starship Troopers Jetboat
...ously released.you can see other models i've made and intend to release on my deviantart page (http://bcampo.deviantart.com/)
thingiverse
free
![NQD Tear Into JetBoat Battery Holder by aliveathome](/t/8301846.jpg)
NQD Tear Into JetBoat Battery Holder by aliveathome
...le-sided tape to the bottom of the hull. use velcro-straps to secure the battery. use adhesive velcro to secure receiver and esc.
thingiverse
free
![NQD Jetboat Impeller by Benm96](/t/8311399.jpg)
NQD Jetboat Impeller by Benm96
...d shaft. i printed in pla with supports (low density). abs or nylon may be more successful. if you try please share your results.
thingiverse
free
![Jetboat edited for cr-10 print size by Limpet65](/t/8253091.jpg)
Jetboat edited for cr-10 print size by Limpet65
...nce i cut the nose off in the solid part of the boat making sure to keep the slope on the hull to reduce any potential overhangs.
thingiverse
free
![4BDN Jetboat hull](/t/4755949.jpg)
4BDN Jetboat hull
....com/forums/showthread.php?3441451-4bdn-fjd-35mm-stator-alternative
(these fit to the fjd inlet and impellors on the same forum.)
thingiverse
free
![Jetboat shell and nozzle mods by eShaman](/t/8374621.jpg)
Jetboat shell and nozzle mods by eShaman
...iver aliexpress
as an addition wanna try fpv just for fun:
akk a3 aio camera
eachine rotg01 pro (otg on android)
vr box for phone