Thingiverse
![Jeep Door Storage Hanger by Mframe](/previews/8649779.jpg)
Jeep Door Storage Hanger by Mframe
by Thingiverse
Last crawled date: 3 years, 2 months ago
This is my design for a Jeep Door Storage Hanger for those times when you want to leave your jeep doors at home. Other commercial and DIY designs rely on hanging the doors using the window frame which can damage your window seals. The alternative metal hanging brackets are expensive for what you get so I figured I would try to print something and see how it performs. Other than your filament (I use PETG for strength), you should be able to get all the additional parts for less than $15.
NOTE: photos are of my prototype, I removed a screw mounting hole from the base plate and rounded off the hangers to allow doors to swing open and closed when hung. New photos soon.
The multi-part design should allow these to work with both TJ and JK models as well as to allow for the replacement of the hangers over time if they wear. Simply print (2) bases and (4) hangers for each pair of doors. Snap the hangers into the base (the funnel side of the base is the top, the triangle ends of the hangers are the bottom). Join each hanger to a base by inserting a 3/8 lag bolt fed down from the top and secured with a nut on the bottom. Once you have assembled both bases measure the appropriate distance between the hangers to match your jeep doors and mount the bases to a stud on your wall. I incorporated a funnel to help guide the door hinge pins into place.
Additional parts:
(4) 3/8 lag bolt, 4" or longer
(4) 3/8 nut
(4) mounting screws to attach to studs
The optional door catches allow you to latch the door against the wall if you wish to prevent the doors from swinging out. You'll need (2) 3/8-16 Square U Bolt Clamps (with no mount plate) and (4) 3/8 nuts and (2) 3/8 washers. Attach a nut and washer to each clamp leg and spin to the top of the thread. Feed the clamps through the holes on the catch plate and secure on the back with the remaining two nuts. Tighten down from the front nuts to secure the u bolt to the catch plate.
Parts:
(2) 3/8-16 Square U Bolt Clamps (with no mount plate)
(4) 3/8 nuts
(2) 3/8 washers.
(4) mounting screws to attach to studs
To mount the door catches, place a door in the installed door hanger. Secure the side of the mounted U Bolt Clamp into a door latch, then swing the door shut toward the wall, marking where the door catch plate should be mounted. Use the diagonal slots to mount the plate (preferably to a stud). You can flip the plate 180 degrees if your stud is to the left or right. The slots should allow you to fine adjust the latch position if needed.
NOTE: photos are of my prototype, I removed a screw mounting hole from the base plate and rounded off the hangers to allow doors to swing open and closed when hung. New photos soon.
The multi-part design should allow these to work with both TJ and JK models as well as to allow for the replacement of the hangers over time if they wear. Simply print (2) bases and (4) hangers for each pair of doors. Snap the hangers into the base (the funnel side of the base is the top, the triangle ends of the hangers are the bottom). Join each hanger to a base by inserting a 3/8 lag bolt fed down from the top and secured with a nut on the bottom. Once you have assembled both bases measure the appropriate distance between the hangers to match your jeep doors and mount the bases to a stud on your wall. I incorporated a funnel to help guide the door hinge pins into place.
Additional parts:
(4) 3/8 lag bolt, 4" or longer
(4) 3/8 nut
(4) mounting screws to attach to studs
The optional door catches allow you to latch the door against the wall if you wish to prevent the doors from swinging out. You'll need (2) 3/8-16 Square U Bolt Clamps (with no mount plate) and (4) 3/8 nuts and (2) 3/8 washers. Attach a nut and washer to each clamp leg and spin to the top of the thread. Feed the clamps through the holes on the catch plate and secure on the back with the remaining two nuts. Tighten down from the front nuts to secure the u bolt to the catch plate.
Parts:
(2) 3/8-16 Square U Bolt Clamps (with no mount plate)
(4) 3/8 nuts
(2) 3/8 washers.
(4) mounting screws to attach to studs
To mount the door catches, place a door in the installed door hanger. Secure the side of the mounted U Bolt Clamp into a door latch, then swing the door shut toward the wall, marking where the door catch plate should be mounted. Use the diagonal slots to mount the plate (preferably to a stud). You can flip the plate 180 degrees if your stud is to the left or right. The slots should allow you to fine adjust the latch position if needed.
Similar models
thingiverse
free
![swinging latch for door or cabinet by nuggyblake](/t/8305790.jpg)
swinging latch for door or cabinet by nuggyblake
...ed a new swing style latch for two cabinet doors. used an m3x25mm allen bolt and two washers with nylock nut on backside of door.
3dwarehouse
free
![Lag Bolt 3/8' with Washer](/t/7226457.jpg)
Lag Bolt 3/8' with Washer
...lag bolt 3/8' with washer
3dwarehouse
3/8' lag bolt with washer
3dwarehouse
free
![3/8'-16 U-Bolt Assembly](/t/9303883.jpg)
3/8'-16 U-Bolt Assembly
...3/8'-16 u-bolt assembly
3dwarehouse
3/16'-16 u-bolt, (2) 3/8' nuts, (2) 3/8' washers
grabcad
free
![Swivel Machine Vice](/t/5640891.jpg)
Swivel Machine Vice
...ping bolt (x 2)
clamping nut (x 3)
jaw plate screw (x 4)
moving jaw bolt (x 2)
screw rod washer
softwares used:
solidworks 2016
grabcad
free
![Drill Jig](/t/5453418.jpg)
Drill Jig
...ill jig
grabcad
a simple drill jig assembly containing a base plate, stem, bush jig plate, latch washer, screws studs, and nuts.
thingiverse
free
![Flexible Solar Panel Mount by mrjadkowski](/t/9232739.jpg)
Flexible Solar Panel Mount by mrjadkowski
...plication.
print these upside down (i.e. you should be able to see the hex-shaped inset for the bolt head on top when you print).
3dwarehouse
free
![1/4' Lag Bolt w/washer](/t/6190987.jpg)
1/4' Lag Bolt w/washer
...1/4' lag bolt w/washer
3dwarehouse
1/4' lag bolt with fender washer #14 #bolt #lag #washer
thingiverse
free
![Strike plate by tmdavis3](/t/8290324.jpg)
Strike plate by tmdavis3
...olt was hitting the plate too high to catch. my modifications now allow the bolt to catch in the strike plate and it works great.
grabcad
free
![Zinc Plated U-Bolt](/t/1983206.jpg)
Zinc Plated U-Bolt
...zinc plated u-bolt
grabcad
zinc plated u-bolt with mount plate, 1/4"-20 thread, 3/4" id, 2 1/4" height
thingiverse
free
![3D Quadcopter by advation](/t/8919225.jpg)
3D Quadcopter by advation
...3d printable quadcopter design.
print 4 arms and 2 base plates and use 8 metric bolts and nuts to secure the arms to the base.
Mframe
thingiverse
free
![Multiplex Extra 330 mFrame repair by Moritz_00](/t/9223506.jpg)
Multiplex Extra 330 mFrame repair by Moritz_00
...pair by moritz_00
thingiverse
problem discribed at http://technikforum.multiplex-rc.de/t/extra-330sc-rr-rearatur-m-frame/5203/6
thingiverse
free
![Deer Blind Shelf Gun rest by Mframe](/t/8624878.jpg)
Deer Blind Shelf Gun rest by Mframe
...not have it slide to either side, so i created these gun rests. they attach with two small screws to the underside of the shelf.
thingiverse
free
![Power Strip Cradle Bracket remix by Mframe](/t/8744114.jpg)
Power Strip Cradle Bracket remix by Mframe
...he cord will interfere with putting the screw in.
edited 2/28/2017
modified bracket to fit around raised surface on power strips
thingiverse
free
![10mm LED Strip Light Mounting Bracket by Mframe](/t/8748296.jpg)
10mm LED Strip Light Mounting Bracket by Mframe
...ts at the ends. the adhesive generally works well but these keep the ends from peeling up when you attach/detach the power cord.
thingiverse
free
![Modular Baseball Hat Rack (Wall Mounted) by Mframe](/t/8638521.jpg)
Modular Baseball Hat Rack (Wall Mounted) by Mframe
...hing:1366821) that incorporates pegs to attach multiple pieces so that you don't have to use a wood screw per piece to mount.
thingiverse
free
![Toilet Roll Cloud Brackets by Mframe](/t/8719743.jpg)
Toilet Roll Cloud Brackets by Mframe
...original when it's printed at 98% and they're printed at 100%
i used metal self-drilling wallboard anchors to mount them.
thingiverse
free
![Scuba Weight Case by Mframe](/t/8640563.jpg)
Scuba Weight Case by Mframe
...39;t fit airtight so it should allow any air bubbles to escape, but you could drill a hole or two for that purpose if you desire.
thingiverse
free
![Tunze Care Magnet (Long) Blade holder by Mframe](/t/8731372.jpg)
Tunze Care Magnet (Long) Blade holder by Mframe
...naps into place holding the blade tightly.
edits:
3/25/2017 - added a half circle to make it fit easier when snapping into place.
thingiverse
free
![Projector Screen Mounting Bracket by Mframe](/t/8725185.jpg)
Projector Screen Mounting Bracket by Mframe
...i left the mounting surface solid and then drilled holes on site to make sure the brackets fit perfectly. (bracket pics attached)
thingiverse
free
![Toilet seat alignment blocks - remix by Mframe](/t/8728471.jpg)
Toilet seat alignment blocks - remix by Mframe
...n and then insert through the upper piece so that both pins are facing up. you may want to dry fit them first before adding glue.
Jeep
3d_export
$5
![jeep](/t/11418523.jpg)
jeep
...jeep
3dexport
jeep toy
3d_export
$5
![jeep](/t/11892208.jpg)
jeep
...jeep
3dexport
this is a 3d jeep created in solidworks.
archibase_planet
free
![Jeep](/t/947337.jpg)
Jeep
...jeep
archibase planet
jeep motor-car car
jeep-wrangler - 3d model for interior 3d visualization.
3d_export
$14
![jeep](/t/13110722.jpg)
jeep
...jeep
3dexport
turbosquid
$100
![Jeep](/t/13451579.jpg)
Jeep
...ep
turbosquid
royalty free 3d model jeep for download as max on turbosquid: 3d models for games, architecture, videos. (1364849)
turbosquid
$40
![jeep](/t/13290091.jpg)
jeep
...eep
turbosquid
royalty free 3d model jeep for download as ma on turbosquid: 3d models for games, architecture, videos. (1183919)
turbosquid
$29
![Jeep](/t/13282779.jpg)
Jeep
...eep
turbosquid
royalty free 3d model jeep for download as ma on turbosquid: 3d models for games, architecture, videos. (1377059)
turbosquid
$5
![Jeep](/t/13384807.jpg)
Jeep
...eep
turbosquid
royalty free 3d model jeep for download as ma on turbosquid: 3d models for games, architecture, videos. (1153064)
turbosquid
$5
![Jeep](/t/13269744.jpg)
Jeep
...ep
turbosquid
royalty free 3d model jeep for download as c4d on turbosquid: 3d models for games, architecture, videos. (1391581)
turbosquid
$1
![JEEP](/t/13335789.jpg)
JEEP
...
turbosquid
royalty free 3d model jeep for download as blend on turbosquid: 3d models for games, architecture, videos. (1608181)
Hanger
3d_export
$5
![hanger](/t/11504167.jpg)
hanger
...hanger
3dexport
hanger
archibase_planet
free
![Hanger](/t/951600.jpg)
Hanger
...hanger
archibase planet
hanger coat hanger holder
hanger n260612 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Hanger](/t/953291.jpg)
Hanger
...hanger
archibase planet
hanger rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
![Hanger](/t/11369145.jpg)
Hanger
...hanger
3dexport
old-fashioned hanger of georgia
3ddd
$1
![Hanger](/t/734238.jpg)
Hanger
...hanger
3ddd
вешалка
classic black hanger
archibase_planet
free
![Hanger](/t/953286.jpg)
Hanger
...hanger
archibase planet
hanger hall-stand rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Hanger](/t/951525.jpg)
Hanger
...hanger
archibase planet
hanger rack peg
hanger n210712 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Hanger](/t/951526.jpg)
Hanger
...hanger
archibase planet
hanger rack sanitary ware
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Hanger](/t/951528.jpg)
Hanger
...hanger
archibase planet
hall-stand rack hanger
hanger n250711 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
![Hanger](/t/951548.jpg)
Hanger
...hanger
archibase planet
hanger hall-stand rack
hanger - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Storage
archibase_planet
free
![Storage](/t/948187.jpg)
Storage
...storage
archibase planet
shelf locker shelving
overhead storage unit - 3d model for interior 3d visualization.
turbosquid
$3
![storage](/t/13278192.jpg)
storage
...id
royalty free 3d model storage for download as stl and ipt on turbosquid: 3d models for games, architecture, videos. (1249483)
3d_export
$5
![Oil storage](/t/11373746.jpg)
Oil storage
...oil storage
3dexport
big oil storage or barrel or storage tank 2 formats lwo & obj
turbosquid
$15
![storage](/t/13250736.jpg)
storage
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
![storage](/t/13307670.jpg)
storage
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
![storage](/t/13307669.jpg)
storage
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
![Storage Baskets](/t/686405.jpg)
Storage Baskets
...storage baskets
3ddd
restoration hardware , корзина
restoration hardware storage baskets
3d_export
$5
![water tank of storage-tank oiltanker storage](/t/11389438.jpg)
water tank of storage-tank oiltanker storage
...ater tank of storage-tank | oiltanker storage can be used in ed model environment. this low poly water tank can be used for free.
archive3d
free
![Storage 3D Model](/t/1044105.jpg)
Storage 3D Model
...3d model
archive3d
storage shelving furniture
storage - 3d model for interior 3d visualization.
3d_export
$8
![chain storage wheel](/t/11446665.jpg)
chain storage wheel
...chain storage wheel
3dexport
chain storage wheel
Door
3d_export
$5
![door handle of doors](/t/11883894.jpg)
door handle of doors
...door handle of doors
3dexport
door handle of doors
3d_ocean
$4
![Door](/t/564791.jpg)
Door
...3docean
architecture door gate gothic door old style door
door, 3d door, gothic door, architecture, old style door, gate, 3d gate
3d_ocean
$10
![Door](/t/579368.jpg)
Door
...door
3docean
design door doors home house indoor interior opening doors
door design
archibase_planet
free
![Door](/t/951426.jpg)
Door
...r
archibase planet
door sliding door interior door rail door
door n250515 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Door](/t/951428.jpg)
Door
...door
archibase planet
door sash door sash-door interior door
door 900 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Door](/t/951429.jpg)
Door
...door
archibase planet
door sash door sash-door interior door
door 600 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Door](/t/951430.jpg)
Door
...door
archibase planet
door sash door sash-door interior door
door 800 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Door](/t/951433.jpg)
Door
...door
archibase planet
door sash door sash-door interior door
door 800 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Door](/t/951435.jpg)
Door
...door
archibase planet
door sash door sash-door interior door
door 700 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Door](/t/951436.jpg)
Door
...door
archibase planet
door sash door sash-door interior door
door 600 - 3d model (*.gsm+*.3ds) for interior 3d visualization.