Jay Mobile Phone Stand by shubhamAT 3d model
3dmdb logo
Thingiverse
Jay Mobile Phone Stand by shubhamAT

Jay Mobile Phone Stand by shubhamAT

by Thingiverse
Last crawled date: 3 years ago
A minimalist phone stand that works with most of the slim mobile phones. Tested with iPhone 5, 6 and Nokia Lumia. Quick to print.
Can be used with a tablet after scaling.
The pictures are of the simple version. The gap in both models is wide enough for a lightning connector. If one intends to use the stand while the device is plugged in, please scale it in the vertical direction by 25% (or so).
Note: Since the object is printed on it's side, scaling operation has to be in X or Y direction (along the print bed) so that the end result is in the vertical direction.
Update: I printed a 20% scaled (in all directions) version using Black ABS of JStand.stl file. This seems to hold IPhone 5 and 6 better, even when they have a thin cover.
I used 3 Perimeters and 0% Infill.

Tags