Thingiverse
ITX APU case by NiceDepth
by Thingiverse
Last crawled date: 4 years, 7 months ago
this is sort of a remix of this https://www.thingiverse.com/thing:4833123
basic 3 part case design for ITX board, 49mm CPU cooler, two 2.5" drives under motherboard, compatible with PicoPSU and DC jack.
made two additional front panel designs for 12mm momentary switch
extra parts needed:
4x M3 inserts and bolts for securing front/back panel
4x M3x12mm standoffs + bolts and nuts for motherboard
8x M3 bolts for 2.5" drives
12mm button / wireless remote
print settings:
no supports needed
shell part needs adhesion layer
use retraction and Z-hop
use soldering iron with needle tip to clean shell part, don't use knife/sanding
waiting for makes and remixes :)
basic 3 part case design for ITX board, 49mm CPU cooler, two 2.5" drives under motherboard, compatible with PicoPSU and DC jack.
made two additional front panel designs for 12mm momentary switch
extra parts needed:
4x M3 inserts and bolts for securing front/back panel
4x M3x12mm standoffs + bolts and nuts for motherboard
8x M3 bolts for 2.5" drives
12mm button / wireless remote
print settings:
no supports needed
shell part needs adhesion layer
use retraction and Z-hop
use soldering iron with needle tip to clean shell part, don't use knife/sanding
waiting for makes and remixes :)