Thingiverse
Isopropyl Alcohol Swap Holder Prusa i3 MK3 by Deathrid3r747
by Thingiverse
Last crawled date: 4 years, 7 months ago
A simple holder to hold Isopropyl Alchohol swabs used for wiping the bed (Like the ones shipped with the MK3).
Can hold in the range of 180-200 swabs (I purchase boxes of 200).
Attaches to the right side of the printer, hex goes into the Z mount and the standoff holds on to the frame above the power supply. Both locations can be optionally secured with zip ties, but it fits tight enough to not require ties.
The photos are an older design, zip tie holes have been made larger to easily fit the ties and the top hook has been made 30% thicker to avoid bending.
Can hold in the range of 180-200 swabs (I purchase boxes of 200).
Attaches to the right side of the printer, hex goes into the Z mount and the standoff holds on to the frame above the power supply. Both locations can be optionally secured with zip ties, but it fits tight enough to not require ties.
The photos are an older design, zip tie holes have been made larger to easily fit the ties and the top hook has been made 30% thicker to avoid bending.