Thingiverse
![ISDF Mortar Bike by LizardBZ2](/previews/8236982.jpg)
ISDF Mortar Bike by LizardBZ2
by Thingiverse
Last crawled date: 3 years, 2 months ago
This model is based on the ISDF Mortar Bike from Battlezone 2 (1999) by Activision.
This model turned out quite a bit smaller than I was expecting it to be, so high print quality settings are advised to get the best out of this one, I printed this with a layer height of 0.08 mm and had decent resutls.
You can print this one with or without supports, I had slightly better results printing this with supports but there wasn't much in it.
This model turned out quite a bit smaller than I was expecting it to be, so high print quality settings are advised to get the best out of this one, I printed this with a layer height of 0.08 mm and had decent resutls.
You can print this one with or without supports, I had slightly better results printing this with supports but there wasn't much in it.
Similar models
thingiverse
free
![Mortar / Pestle to squash Lemons by thegreatdane7](/t/8163028.jpg)
Mortar / Pestle to squash Lemons by thegreatdane7
...hegreatdane7
thingiverse
i was missing out on a mortar on some sunday and all shops were closed, so i just simply created one :)
thingiverse
free
![Replacement wheel for Jandy Zodiac Ray-Vac pool cleaner by cmh](/t/8273566.jpg)
Replacement wheel for Jandy Zodiac Ray-Vac pool cleaner by cmh
...t that needs support material is the outer edge. this allows the part to be printed as one piece which is simpler and works well.
thingiverse
free
![Bike Light Base for 6000Lumen Cree LED Light by gingernut_80](/t/8910010.jpg)
Bike Light Base for 6000Lumen Cree LED Light by gingernut_80
...w one and printed on the robox, using
simplify3d for the support generation.
get your thing printed here:http://bit.do/3dprintz
thingiverse
free
![Bicycle Tool holder (Bike Boy) by gigl](/t/8729242.jpg)
Bicycle Tool holder (Bike Boy) by gigl
...in my place) and offers space for 2 allen keys and one wrench.
no support needed, but print at 35% infill to make it more rigid.
thingiverse
free
![Zwift Tablet holder for sport bike](/t/4894186.jpg)
Zwift Tablet holder for sport bike
...general, the second one is enforced.
print in petg or in abs. you need only support the small holder - rest - no support needed.
thingiverse
free
![Lothcat by emmaguy](/t/9674451.jpg)
Lothcat by emmaguy
...pretty happy with him.
printing:
supports needed. i printed him at about 8x8cm with 20% infil and he came out fine on my voxelab.
thingiverse
free
![Drop Bar End Cap by belyle](/t/8709497.jpg)
Drop Bar End Cap by belyle
...up for 3d printing. i recommend using supports just so the little sticking out bits on the sides print nicely. but not required.
thingiverse
free
![Punch - 10 Yr Anniversary Keyring by westcpw](/t/8920943.jpg)
Punch - 10 Yr Anniversary Keyring by westcpw
...s for her hand made cards (check out papercreations.net.au).
this one i modelled in blender, had it printed and made a keyring.
thingiverse
free
![M113A1G mortar carrier by Iava808](/t/8691854.jpg)
M113A1G mortar carrier by Iava808
...m113a1g mortar carrier by iava808
thingiverse
glue on parts after printing. this one model i sometimes use 10 infill on it
thingiverse
free
![Zheng Penny Mortar Fat Nock by AMS3000](/t/9048904.jpg)
Zheng Penny Mortar Fat Nock by AMS3000
...penny mortar, so i popped it into tinkercad and fattened up the walls in the trouble area (the hole where the band goes through).
Isdf
thingiverse
free
![ISDF Scout by LizardBZ2](/t/8199432.jpg)
ISDF Scout by LizardBZ2
...gthen them, or you could just try scaling the model up, this model is the same scale as the sabre tank previously released by me.
thingiverse
free
![ISDF Walker by LizardBZ2](/t/8171995.jpg)
ISDF Walker by LizardBZ2
... i have baked supports into the objects where practical, the only parts that will need to be printed with supports are the guns .
3dwarehouse
free
![Battlezone 2 ISDF battle tank with plasma cannon](/t/5320471.jpg)
Battlezone 2 ISDF battle tank with plasma cannon
...ol #fighting #great #isdf #outer_space #plasma #space #space_craft #space_ship #spacecraft #spaceship #super #tank #vehircle #war
Lizardbz2
thingiverse
free
![ISDF Scout by LizardBZ2](/t/8199432.jpg)
ISDF Scout by LizardBZ2
...gthen them, or you could just try scaling the model up, this model is the same scale as the sabre tank previously released by me.
thingiverse
free
![Replacement clip for waterproof outdoor power outlet cover by LizardBZ2](/t/10232172.jpg)
Replacement clip for waterproof outdoor power outlet cover by LizardBZ2
...signs are quite weak and prone to snapping, this design has been beefed up in a few key areas and should prove to be more robust.
thingiverse
free
![ISDF Walker by LizardBZ2](/t/8171995.jpg)
ISDF Walker by LizardBZ2
... i have baked supports into the objects where practical, the only parts that will need to be printed with supports are the guns .
thingiverse
free
![Dpad for sega 6 button controller by LizardBZ2](/t/9678164.jpg)
Dpad for sega 6 button controller by LizardBZ2
...tem of what remained of the old dpad, i flattened two sides of the head using a file although this may not be entirely necessary.
Mortar
turbosquid
$19
![Mortar](/t/13482312.jpg)
Mortar
...uid
royalty free 3d model mortar for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1197208)
3d_ocean
$5
![Mortar and Pestle](/t/880.jpg)
Mortar and Pestle
...mortar and pestle
3docean
brass brazen kitchen medicine mortar pestle
a brazen mortar and a pestle with some scratches
3d_export
$5
![mortar](/t/11421892.jpg)
mortar
...mortar
3dexport
3d_ocean
$5
![Mortar and Pestle](/t/561808.jpg)
Mortar and Pestle
...mortar and pestle
3docean
alchemist cooking crush kitchen mortar pestle silver witch
a silver mortar and pestle set
turbosquid
$48
![Mortar](/t/13289927.jpg)
Mortar
...oyalty free 3d model mortar for download as max, max, and 3ds on turbosquid: 3d models for games, architecture, videos. (1589238)
3d_export
$15
![mortar 80mm](/t/11458952.jpg)
mortar 80mm
...mortar 80mm
3dexport
mortar 4k textures uvw
turbosquid
$50
![Mortar](/t/13355850.jpg)
Mortar
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
![Mortar](/t/13233243.jpg)
Mortar
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$16
![Mortar](/t/13355929.jpg)
Mortar
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$16
![Mortar](/t/13355930.jpg)
Mortar
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Bike
3d_ocean
$18
![Bike](/t/568268.jpg)
Bike
...bike
3docean
bicycles bike sports transport
3d model bike
3d_export
$5
![bike](/t/11461339.jpg)
bike
...bike
3dexport
bike
3d_export
$50
![bike](/t/11705158.jpg)
bike
...bike
3dexport
3d bike model
turbosquid
free
![bike-bike-rack](/t/13265044.jpg)
bike-bike-rack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
archibase_planet
free
![Bike](/t/950375.jpg)
Bike
...bike
archibase planet
bike bicycle cycle
bike n161113 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
![Bike](/t/950373.jpg)
Bike
...bike
archibase planet
bike bicycle cycle
bike and rack n220613 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
![Bike](/t/950376.jpg)
Bike
...rchibase planet
bike bicycle cycle two-wheeled bicycle
bike n031213 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
archibase_planet
free
![Bike](/t/950377.jpg)
Bike
...rchibase planet
bike bicycle cycle two-wheeled bicycle
bike n180714 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
3d_ocean
$35
![Batpod Bike](/t/15539.jpg)
Batpod Bike
...cean
batman batman bike batpod bike bike motorcycle stylish bike
detailed model of a famous batpod bike used in the movie batman.
3d_export
$5
![exercise bike](/t/11928732.jpg)
exercise bike
...exercise bike
3dexport
exercise bike, spin bike, bike, gym equipment, exerciser