Thingiverse
Irrigation system with kidwinds pump by 3Dresearcher
by Thingiverse
Last crawled date: 4 years, 5 months ago
Testmodel for drip irrigation and good working model.
The small model works if the water pressure from the pomp is low, otherwise the water doesn't make the turn.
The large model is simple model. Excess water flows out and the fluid in the canister drips in the soil. The hole in the large model is for the moisture sensor.
I used these models for irrigation with IOT by using the Cloudprofessor to control the pump.
project video on : http://www.olc-stem.be/2017/08/12/irrigatie-systeem-voor-mini-serre/
The small model works if the water pressure from the pomp is low, otherwise the water doesn't make the turn.
The large model is simple model. Excess water flows out and the fluid in the canister drips in the soil. The hole in the large model is for the moisture sensor.
I used these models for irrigation with IOT by using the Cloudprofessor to control the pump.
project video on : http://www.olc-stem.be/2017/08/12/irrigatie-systeem-voor-mini-serre/