Iron Battle Axe (Destiny) by Sraf

Last crawled date: 3 years, 1 month ago

This is a replica of the Iron Lord Axe from Destiny: Rise of Iron. Print four of the axe quarters, you can use small dowels or rods to hold the left and right halves together, while the front and back was meant to be held on with magnets. You'll need to get twelve 1/4 inch and twelve 3/8 inch rare earth magnets that are 1/10 of an inch thick. The interface will hold the quarters, and can be friction fit (though I would use E6000 or epoxy) on to a, 1 1/4" aluminum tube
One thing I would like to mention, when I started on this, I used the Iron Emblem that serves as the cover image for the Rise of Iron. The axe depicted there has a different height to width ratio than the in game model, at this point, I have changed the aspect ratio of the axe to follow that of the in game model
The Grip file is optional, I am wrapping my grip in a leather braid, but I felt that not everyone would want to or even be able to do this, so I made a facsimile that you can print and use in place of real leather, it will slip right over the grip base, and will couple with the grip trim, you'll likely need to glue these parts together