Thingiverse
IRC Vortex motor grip (Tiger MN1806 motors) by Docus
by Thingiverse
Last crawled date: 4 years, 11 months ago
This tool gives you a better grip while changing your props at the Tiger MN 1806 motors of your IRC Vortex.
M3 x 12 (or longer) and M3 nut is required.
Glue a pice of rubber with double-sided tape to the inner diameter of the tool.
M3 x 12 (or longer) and M3 nut is required.
Glue a pice of rubber with double-sided tape to the inner diameter of the tool.