Iphone 6 timelapse mount by Cjoutwest

Last crawled date: 3 years ago

This is a mount that I designed to hold my Iphone 6 in order to take time lapses of prints. To hold it to your print bed you need to use bulldog clips or some other kind of clip that is similar. I use 4 on my printer, 1 on each end and then 1 one directly on either side of the phone extension. The extension is held onto the base using 1 inch by 6/32 inch screws and secured using 6/32 inch nuts. The phone rest is help onto the extension the same way. The clamps are secured using a total of 4 1 inch by 6/32 inch screws and 4 6/32 inch nuts.
You will need two of the "phone go pro mount clamp"
You will need one of the "phone go pro mount extension"
You will need one of the "phone go pro mount base"
You will need one of the "phone go pro mount phone rest"
In order to use this design you will also need
8 - 1 inch 6/32 inch screws
8 - 6/32 nuts