Thingiverse
IOIO HT2000 Electronic Thermostat to Danfoss RAVL adapter and lock by DonJuanito
by Thingiverse
Last crawled date: 3 years, 3 months ago
After more than 20 years of good service, I had to replace some Danfoss thermostatic heads, and they're not cheap. Then, a kid accidently pulled on one of the new heads and broke it :(
So I looked for a cheap electronic replacement, and after comparing several models, I selected the IOIO HT2000 as both a reliable and cheap solution.
The problem came with the plastic adapter to my Danfoss RAVL valves. It "grips" the valve head and when the electronic head is screwed on it, should still have a good hold on the valve.
But on several vales, as soon as the head pushes on the valve pin; the head "ejects" itself from the valve!
So I first designed a "lock" that retains the adapter on the valve, then redesigned the original RAVL adapter so I can replace it if I break or loose one.
After a month of use, the 8 valves with added locks are in perfect condition and the heads are still strongly held in place...
So I looked for a cheap electronic replacement, and after comparing several models, I selected the IOIO HT2000 as both a reliable and cheap solution.
The problem came with the plastic adapter to my Danfoss RAVL valves. It "grips" the valve head and when the electronic head is screwed on it, should still have a good hold on the valve.
But on several vales, as soon as the head pushes on the valve pin; the head "ejects" itself from the valve!
So I first designed a "lock" that retains the adapter on the valve, then redesigned the original RAVL adapter so I can replace it if I break or loose one.
After a month of use, the 8 valves with added locks are in perfect condition and the heads are still strongly held in place...
Similar models
grabcad
free
Danfoss RAVL -> M30x1,5 Adapter
...danfoss ravl -> m30x1,5 adapter
grabcad
adapter to mount thermostats with m30x1,5 thread to ravl-valves from danfoss
thingiverse
free
Adapter Danfoss RAVL valve to M30x1.5 thread
...2mm will likely do too. make sure your printer is dimensionally accurate, you are printing a thread and it has its tolerances ;-)
thingiverse
free
RAVL Thermostat to M30x1.5 Adapter
...r to the pipe instead of just relying on clamping forces via the thread.
used @migi82's thread design and added the clamping.
thingiverse
free
Danfoss thermostat adapter ring by damiancd
...apter, and printed adapter ring (previous version, uploaded one is better).
i printed it using pla, 100% infill, 0.1 layer height
thingiverse
free
Danfoss RAVL to 30mmX1.5mm adaptor by stephenmhall
...py mess and a valve popped off onto the floor. i forgot the glass transition of pla is about 60c to 70c and so is a hot radiator.
thingiverse
free
Danfoss RA type valve to M30x1.5 thermostats adapter by antonveretenenko
...ld not hold with heat. although i made an update with thicker walls and it may work with pla, but i have not tested last one yet.
grabcad
free
Thermostatic Valve TS2
...thermostatic valve ts2
grabcad
thermostatic valve ts2 danfoss
grabcad
free
Orifice for thermostatic valve
...orifice for thermostatic valve
grabcad
orifice for thermostatic valve danfoss mod.te n04
thingiverse
free
RAVL Adapter by migi82
...pter by migi82
thingiverse
danfoss ravl on m30x1.5
print in abs (don't use pla)
adapter2 you have to cut with a x-acto knife
thingiverse
free
eQ-3 eq3 thermostat to Danfoss RAV valve adapter v8
... dent for the pipe clip. changed the height of the dent from 0.5 to 0.75 to solve the issue
i keep the openscad source on github.
Ravl
thingiverse
free
RAVL Adapter by migi82
...pter by migi82
thingiverse
danfoss ravl on m30x1.5
print in abs (don't use pla)
adapter2 you have to cut with a x-acto knife
thingiverse
free
eq-3 MAX RAVL Adapter by nemesisde
... für eq-3 max! thermostate.
bei den neuen thermostaten ist dieser adapter nicht mehr dabei.
passt für ravl 25,5mm mit 4 kerben.
thingiverse
free
RAVL Thermostat to M30x1.5 Adapter
...r to the pipe instead of just relying on clamping forces via the thread.
used @migi82's thread design and added the clamping.
thingiverse
free
Danfoss RAVL to 30mmX1.5mm adaptor by stephenmhall
...py mess and a valve popped off onto the floor. i forgot the glass transition of pla is about 60c to 70c and so is a hot radiator.
thingiverse
free
Netatmo adapter for RAVL 26 / 32 mm thread by makerpetri
...eights, 9 and 15 mm with and without a side slot.
netatmo_26_32_inside_thread_v4_full_circle.stl is a custom fit for my radiators
thingiverse
free
Adapter Danfoss RAVL valve to M30x1.5 thread
...2mm will likely do too. make sure your printer is dimensionally accurate, you are printing a thread and it has its tolerances ;-)
grabcad
free
Danfoss RAVL -> M30x1,5 Adapter
...danfoss ravl -> m30x1,5 adapter
grabcad
adapter to mount thermostats with m30x1,5 thread to ravl-valves from danfoss
Donjuanito
thingiverse
free
eLeaf iStick TC40W Case by DonJuanito
...k tc40w made with openscad.
it fits rather nicely and should provide some wear and shock protection.
you are free to modify it...
thingiverse
free
GL.iNet 64xx WiFi router model by DonJuanito
...d model, but i had several lying around...
see http://www.thingiverse.com/thing:2183378 for an enclosure built with this model...
thingiverse
free
Legrand Mosaic Faceplate / Façade Legrand Mosaic by DonJuanito
...this an openscad version of korn_beef's stl original.
it should 99.9% identical to the source.
i haven't tested it yet...
thingiverse
free
OpenSCAD syringe plunger by DonJuanito
...ng parameters:
pd : plunger diameter
pbl: plunger body length (without plunger disc nor push/base disc)
pcw: vertical walls width
thingiverse
free
Hakko T12 tips holder by DonJuanito
...(even if it's not easy to do).
note that as the tips are grabbed over their label, it can be damaged by the holder fingers...
thingiverse
free
Flux syringe cap by DonJuanito
...h (ww) but don't go too far...
the plunger used in the pictures is from divinecobra: http://www.thingiverse.com/thing:1902471
thingiverse
free
Small PCB Mechanical Coupler by DonJuanito
...ndpcb1corncut/rndpcb2corncut variables to choose between the cutout or rounded corners (or set all to 0 to use square corners)...
thingiverse
free
0.96" OLED modules models by DonJuanito
...errors and some hardware variations exist.
see http://www.thingiverse.com/thing:2183378 for an enclosure built with these models.
thingiverse
free
MPR-A5-V11 wifi router model by DonJuanito
...mes.
i have checked the measurements against two real router pcbs, but be aware that there could still be errors in this model...
thingiverse
free
Customizable storage/components drawer by DonJuanito
.../sanding.
the source file is (heavily) commented...
note: i still haven't printed this, but i cannot see why it would fail...
Ioio
thingiverse
free
IOIO Holder by bjepson
...thingiverse
this platform holds a single ioio (https://github.com/ytai/ioio/wiki/) board with clearance for the power connector.
thingiverse
free
IOIO enclosure by SFE_Tim
... a first attempt at a ioio enclosure. it has studs that will need to be drilled out if you choose to mount your ioio with screws.
thingiverse
free
IOIO enclosure by Sparkfun
... a first attempt at a ioio enclosure. it has studs that will need to be drilled out if you choose to mount your ioio with screws.
thingiverse
free
Dual IOIO Holder by DDRBoxman
...dual ioio holder by ddrboxman
thingiverse
a platform to hold two ioio devices.
thingiverse
free
IOIO base plate by SFE_Tim
...io base plate by sfe_tim
thingiverse
a nice little base plate for your ioio board. created by paul smith at sparkfun electronics
thingiverse
free
IOIO base plate by Sparkfun
...o base plate by sparkfun
thingiverse
a nice little base plate for your ioio board. created by paul smith at sparkfun electronics
thingiverse
free
IOIO Box by srownin
...y connected with an inline switch, so i have also added an inset openning in the box for this switch (radioshack part# 275-0409).
grabcad
free
Yoyo ioio
...yoyo ioio
grabcad
just a simple butterfly shape yoyo.
grabcad
free
ioioboard
...house.sketchup.com/model/b69e26eb50b52143859e797b215f9e32/ioio-otg-board?hl=en&login=true
in order to get other file formats
Danfoss
3ddd
$1
Набор водопроводной арматуры
...клапан stad-c -статический балансировочный клапан vir 9505 -клапан ручной danfoss usv-i -стекло смотровое одностороннее sw12 dn15-25 -flamco сепаратор воздуха...
thingiverse
free
Danfoss RAV Adapter
...verse
adapter for heating valve from danfoss rav to heimeier.
shorten pin if needed.
additionially needed parts: m3 screw + nut
thingiverse
free
cover for Danfoss pressure transsmiter by Marekcheng
...cover for danfoss pressure transsmiter by marekcheng
thingiverse
cover for danfoss pressure transsmiter
thingiverse
free
SUPPORT DANFOSS ROOM SENSOR by Otrebor32
...support danfoss room sensor by otrebor32
thingiverse
support danfoss room sensor
aggiornato
thingiverse
free
danfoss 2951 to netatmo valve by Vesterhavet
...danfoss 2951 to netatmo valve by vesterhavet
thingiverse
dont mind the name of the file, it fits danfoss 2951. (not rav 34mm)
thingiverse
free
Danfoss Living Connect RAV Adapter
...danfoss living connect rav adapter
thingiverse
a more stable mount for danfoss living connect.
rotate 180 before printing.
thingiverse
free
RAV Danfoss Adapter by crissmuty
...danfoss adapter with metric thread. print it upside down (180°). needs no support, just break the 3 small cillinders after print.
thingiverse
free
Danfoss valve head by negativ72rus
...re controller knob danfoss rtd-g dn15 013l3746. pet-g works fine, but abs can be used to be sure.
sources:https://a360.co/2ut6s5s
thingiverse
free
Surfacemount for Danfoss Link controller by allram
..."flap" printed correctly.
this will click-in-place between the base and the front panel of the danfoss link controller.
thingiverse
free
Redukce Danfoss RTD M30 x 1,5 mm by pemlik
...redukce danfoss rtd m30 x 1,5 mm by pemlik
thingiverse
redukce danfoss rtd m30 x 1,5 mm
Thermostat
turbosquid
free
Thermostat
...id
free 3d model thermostat for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1506243)
archive3d
free
Thermostat 3D Model
...ive3d
thermostat equipment home appliances
thermostat - 3d model for interior 3d visualization.
archive3d
free
Thermostat 3D Model
...tor temperature controller
thermostat 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Thermostat 3D Model
...controller thermoregulator
thermostat 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Thermostat 3D Model
...perature controller
thermostat eti-1551 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Thermostat 3D Model
...rature controller
thermostat etf-744-99 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Thermostat 3D Model
...ntroller equipment
thermostat etr-1447a - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Thermostat 3D Model
...ontroller equipment
thermostat etv-1991 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Thermostat 3D Model
...pment
thermostat oj electronics n130913 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$35
Thermostat - Basin_Mixer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Lock
turbosquid
$1
Lock
...ck
turbosquid
royalty free 3d model lock for download as fbx on turbosquid: 3d models for games, architecture, videos. (1286851)
3d_export
$5
lock handle
...lock handle
3dexport
lock handle
3d_export
$5
hinged lock
...hinged lock
3dexport
hinged lock
turbosquid
$1
Lock Box with combination lock
...ee 3d model lock box for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1215494)
turbosquid
$2
Lock
...
royalty free 3d model lock for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1452660)
turbosquid
$35
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$24
lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Electronic
turbosquid
$1
electron
...urbosquid
royalty free 3d model electron for download as max on turbosquid: 3d models for games, architecture, videos. (1157488)
turbosquid
$50
electronic
...
royalty free 3d model electronic for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1289427)
3d_ocean
$8
Electronic game
...electronic game
3docean
electronic games nu pogody wait a minute well
electronic game “well, wait a minute”, “nu pogody”
3ddd
$1
Brilux Electronic
...brilux electronic
3ddd
подвес. brilux electronic. польша. материалы настроены.
3d_export
free
electronic shop
...lectronic shop with high quality interior and exterior. it has tvs smartphone play station printer and many more electronic item.
3ddd
$1
Термостаты OJ Electronics
...ермостаты oj electronics
3ddd
oj electronics , термостат
термостаты фирмы oj electronics
3d_export
$8
electron 714
...electron 714
3dexport
game ready model for export to unreal engine soviet tv electron 714 pbr 4k
3ddd
$1
Термостат OJ Electronics
... oj electronics
3ddd
oj electronics , термостат
термостат occ2-1991 фирмы oj electronics
turbosquid
$60
Electronics Stuff
...
royalty free 3d model electronics stuff for download as max on turbosquid: 3d models for games, architecture, videos. (1624680)
turbosquid
$2
ELECTRONIC PARTS
...
royalty free 3d model electronic parts for download as blend on turbosquid: 3d models for games, architecture, videos. (1481798)
Adapter
3d_export
$10
Adapter 3D Model
...adapter 3d model
3dexport
adapter
adapter 3d model mur 20260 3dexport
archive3d
free
Adapter socket 3D Model
...dapter socket adapter
adapter socket n090211 - 3d model (*.3ds) for interior 3d visualization.
archive3d
free
Adapter 3D Model
...ups pc equipment
adapter extron n180813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$5
usb adapter
...royalty free 3d model usb adapter for download as ige and stl on turbosquid: 3d models for games, architecture, videos. (1582234)
turbosquid
$15
Power adapter
...free 3d model power adapter for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1510024)
turbosquid
$8
USB adapter
...e 3d model usb adapter for download as max, fbx, obj, and dwg on turbosquid: 3d models for games, architecture, videos. (1713542)
turbosquid
$30
adapter.3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Nokia Adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Adapter Netgear
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$4
SanDisk Memory Card and Adapter
...sandisk memory card and adapter
3docean
this is a 3d model of a sandisk memory card and adapter.