Thingiverse
Interlocking Wall Blocks
by Thingiverse
Last crawled date: 5 years, 12 months ago
A printed wall to further isolate my 3D-printer.
Keeps the heat in and the dust out.
And takes care of any filament remains that are to short to create something useful.
I used OpenScad create cut-off pieces to get as close as possible to the poly carbonate cover.
I tried to add something decorative:
First print one layer (or two) of a PrintBed pattern in a different color than the building block
PrintBed Pattern: https://www.thingiverse.com/thing:4209909
Print one or more building blocks on this pattern.
The Wedge is to clamp the poly carbonate sheet to the H block wall
Keeps the heat in and the dust out.
And takes care of any filament remains that are to short to create something useful.
I used OpenScad create cut-off pieces to get as close as possible to the poly carbonate cover.
I tried to add something decorative:
First print one layer (or two) of a PrintBed pattern in a different color than the building block
PrintBed Pattern: https://www.thingiverse.com/thing:4209909
Print one or more building blocks on this pattern.
The Wedge is to clamp the poly carbonate sheet to the H block wall