Thingiverse
Interchangeable FPV pod by Ivan_Cillo
by Thingiverse
Last crawled date: 4 years, 1 month ago
This is an interchangeable FPV pod designed for 15mm diameter lens cameras and the Eachine ET600 video transmitter.
The camera mount can be reguled for the perfect inclination and the pod includes a pin board for all possible osd connections.
It can be used with serie osd (all those must be conected between camera and transmitter, like myflydream) and parallel osd (all those must be connected on parallel with camera, like Hobbyking´s g-osd).
It has a closing bar to fix the pod on the mounts. There are two types of pods to fix with ties, one for airplanes and other for the F450 quadcopter.
Required bolts, nuts and screws:
1 M4x25mm bolt and M4 nut. I use a nylon one.
1 D2x8mm screw.
2 D2x12mm screws.
1 pen spring (D4x15mm aprox.).
Infill 25% and honneycomb pattern.
Note: VTx tower and spring cover must be glued with ciano.
Link to transmitter (note:it needs a dissipator):http://www.banggood.com/Eachine-ET600-5_8G-32CH-600mW-Super-Light-Transmitter-p-974640.html
The camera mount can be reguled for the perfect inclination and the pod includes a pin board for all possible osd connections.
It can be used with serie osd (all those must be conected between camera and transmitter, like myflydream) and parallel osd (all those must be connected on parallel with camera, like Hobbyking´s g-osd).
It has a closing bar to fix the pod on the mounts. There are two types of pods to fix with ties, one for airplanes and other for the F450 quadcopter.
Required bolts, nuts and screws:
1 M4x25mm bolt and M4 nut. I use a nylon one.
1 D2x8mm screw.
2 D2x12mm screws.
1 pen spring (D4x15mm aprox.).
Infill 25% and honneycomb pattern.
Note: VTx tower and spring cover must be glued with ciano.
Link to transmitter (note:it needs a dissipator):http://www.banggood.com/Eachine-ET600-5_8G-32CH-600mW-Super-Light-Transmitter-p-974640.html