Thingiverse
Intel Nuc and Raspberry PI Monitor Mount by portscanner
by Thingiverse
Last crawled date: 4 years, 8 months ago
I wanted a mount to put my Intel NUC on my dual monitor mount on my desk. I found one, but it had the wrong pole size. The stl file included with this project is for a pole that is 35.2 mm in radius. You may want to print two of these, one for the top, one for the bottom for symmetry, but one is more than strong enough to hold it.
Raspberry PI Update - 2018/10/05
I realized if you team up this bracket with 0110-M-P's VESA raspberry case design (see: https://www.thingiverse.com/thing:922740 ) you can mount your raspberry PI to a monitor mount! The hole spacing on my bracket lines up with 0110-M-P's case!
Raspberry PI Update - 2018/10/05
I realized if you team up this bracket with 0110-M-P's VESA raspberry case design (see: https://www.thingiverse.com/thing:922740 ) you can mount your raspberry PI to a monitor mount! The hole spacing on my bracket lines up with 0110-M-P's case!