Thingiverse
Insert Sign
by Thingiverse
Last crawled date: 6 years ago
This is an insert sign I designed for at work, I could not find anything like it on thingiverse so I designed my own.
insert-sign-body.stl
-Prints well at 0.15mm and 0.2mm
-Support are built into model and just need removed and cleaned up
-Note 1: The size of the header was enlarged and the photo is of the original prototype so refer to .stl for actual size
sign-insert.stl
-Add text using whatever software you prefer (I made mine 1mm deep)
-Add a filament swap at the appropriate layer height (use contrasting colors for best visibility)
-Note 2: For the text leave enough spacing around the insert so when inserted into the sign body all text is visible
-Note 3: If centering the text, shift everything slightly to the right as the dead center of the insert is not the center when viewed through the sign's window
insert-sign-body.stl
-Prints well at 0.15mm and 0.2mm
-Support are built into model and just need removed and cleaned up
-Note 1: The size of the header was enlarged and the photo is of the original prototype so refer to .stl for actual size
sign-insert.stl
-Add text using whatever software you prefer (I made mine 1mm deep)
-Add a filament swap at the appropriate layer height (use contrasting colors for best visibility)
-Note 2: For the text leave enough spacing around the insert so when inserted into the sign body all text is visible
-Note 3: If centering the text, shift everything slightly to the right as the dead center of the insert is not the center when viewed through the sign's window