Thingiverse
InMoov Jaw Mount Reinforcement Buttons by mayaway
by Thingiverse
Last crawled date: 4 years, 7 months ago
The existing InMoov jaw mount is radically fragile. I broke one of mine just handling the InMoov JawHolderV2.stl Glue these two pins into the existing split mounts, then use a washer and screw to hold the JawSupportV1.stl in place, after grinding the pins down to fit. I used the Dremel, and knocked the lip off the existing part as well.
Well I've given up on these darn little pins, one of which broke off wrestling with the head. I've now ground them of and replaced them with two little 9/32 brass tubing bushings, and a 3mm x 25mm screw and an aircraft lock nut. See the pic! Any hardware store has the tubing.
Well I've given up on these darn little pins, one of which broke off wrestling with the head. I've now ground them of and replaced them with two little 9/32 brass tubing bushings, and a 3mm x 25mm screw and an aircraft lock nut. See the pic! Any hardware store has the tubing.