Thingiverse
Infield Engineering Brewster Buffalo Detail Parts by Longhorne
by Thingiverse
Last crawled date: 4 years, 7 months ago
Summary
These parts fit the 30" radio controlled Brewster F2A Buffalo model of my design.
The spinner is a 2-piece assembly. The nose cone snaps into the backing plate. The cone's OD is 42mm. The length is 43mm. This spinner works well with an eFlite 3mm prop adapter.
The dummy wheels printed well when oriented with the hubcap facing up.
The motor used for my model was designed by Wilmracer and printed at 74%. It can be found here:https://www.thingiverse.com/thing:3844442
Follow the AMA Safety Code when using this spinner! Propellers and spinners that rotate at high speed are inherently dangerous. Use extreme care in fabricating and using this part. Use at your own risk!
These parts fit the 30" radio controlled Brewster F2A Buffalo model of my design.
The spinner is a 2-piece assembly. The nose cone snaps into the backing plate. The cone's OD is 42mm. The length is 43mm. This spinner works well with an eFlite 3mm prop adapter.
The dummy wheels printed well when oriented with the hubcap facing up.
The motor used for my model was designed by Wilmracer and printed at 74%. It can be found here:https://www.thingiverse.com/thing:3844442
Follow the AMA Safety Code when using this spinner! Propellers and spinners that rotate at high speed are inherently dangerous. Use extreme care in fabricating and using this part. Use at your own risk!