Thingiverse
![Incra Flip Fence T-slot nut by axg20202](/previews/8028978.jpg)
Incra Flip Fence T-slot nut by axg20202
by Thingiverse
Last crawled date: 3 years, 5 months ago
This is a remix of 'Nut B' from https://www.thingiverse.com/thing:3851846, by MarcElbichon.
I needed a T-slot nut for the back of the Incra Flip Fence, but I found the part designed by Marc was too large, at least on my printer, so I made it slightly thinner.
Printed at 0.16, 100% infill, it required some light sanding with 120 grit on the long sides for a nice tight fit.
Print as shown with nut recess on the bed and add tree supports touching the bed only. This results in a small, easily removable support in the nut recess.
UPDATE: I've added a metric M5 version which is much better for the non US folks (me included). :-)
An M5 nut is an extremely tight fit in this part, so that the nut is retained. Once you've removed the small amount of support material, the nut needs to be lined up and pressed in with a vice or metal clamp. Once in, it won't be coming out. Squeezing the nut in causes slight expansion and a fit that might be too tight to get the nut in the slot. Sand the long sides a little with 120 grit sandpaper for a tight fit in the Incra flip fence but loose enough to insert.
BTW, I designed this piece to come up with a cheap and easy method to mount the Incra Flip fence to a worktop with some basic brackets, so that I could use the fence for repeated cuts at my mitre saw.
I needed a T-slot nut for the back of the Incra Flip Fence, but I found the part designed by Marc was too large, at least on my printer, so I made it slightly thinner.
Printed at 0.16, 100% infill, it required some light sanding with 120 grit on the long sides for a nice tight fit.
Print as shown with nut recess on the bed and add tree supports touching the bed only. This results in a small, easily removable support in the nut recess.
UPDATE: I've added a metric M5 version which is much better for the non US folks (me included). :-)
An M5 nut is an extremely tight fit in this part, so that the nut is retained. Once you've removed the small amount of support material, the nut needs to be lined up and pressed in with a vice or metal clamp. Once in, it won't be coming out. Squeezing the nut in causes slight expansion and a fit that might be too tight to get the nut in the slot. Sand the long sides a little with 120 grit sandpaper for a tight fit in the Incra flip fence but loose enough to insert.
BTW, I designed this piece to come up with a cheap and easy method to mount the Incra Flip fence to a worktop with some basic brackets, so that I could use the fence for repeated cuts at my mitre saw.
Similar models
thingiverse
free
![Incra flip fence mounting bracket by axg20202](/t/8009065.jpg)
Incra flip fence mounting bracket by axg20202
...rint because it is overengineered to be strong. it works fine in pla, but is even better in petg. infill 40%. no support needed .
thingiverse
free
![Knob for M5 threaded rod / stud by pefozzy](/t/8523816.jpg)
Knob for M5 threaded rod / stud by pefozzy
...out the nut socket with an x-acto knife or similar then press a standard m5 nut into the nut...
thingiverse
free
![M5 Slot Nut by GeoffB](/t/8883613.jpg)
M5 Slot Nut by GeoffB
... extrusion profile here:http://www.thingiverse.com/thing:871866
i've included the openscad file too if you want to adjust it.
thingiverse
free
![10-32 T-nut for OpenBuild V-Slot extrusion by maso27](/t/8973989.jpg)
10-32 T-nut for OpenBuild V-Slot extrusion by maso27
... 10-32 nuts, and i recommend supergluing each nut into place within the plastic piece to keep things from moving around too much.
thingiverse
free
![Bracket with M5 nut by AvSBandit](/t/8668295.jpg)
Bracket with M5 nut by AvSBandit
...ed ;).
measurements see photo 4.
print recommendation see photo 5.
maybe this comes in handy with some wood working diy projects.
thingiverse
free
![Nokia DT-900 wireless charger phone stand by billdit1](/t/8231736.jpg)
Nokia DT-900 wireless charger phone stand by billdit1
...9;t work very well because it was a round hole, now it's more of a slot.
the post printing images are of the original design.
thingiverse
free
![Security fence support for Ikea Släkt bed by ftaysse](/t/8176894.jpg)
Security fence support for Ikea Släkt bed by ftaysse
...after installation.
i would suggest printing with multiple perimeters and top/bottom layers to give the screws an healthy support
thingiverse
free
![T-nut M3/M4/M5 drop-in rotating V-Slot - all plastic by tkbletsc](/t/8340638.jpg)
T-nut M3/M4/M5 drop-in rotating V-Slot - all plastic by tkbletsc
...es in m5 for mounting electronics, and you can't fit an m5 nut in the original design.
important: to be printed on the side.
thingiverse
free
![M5 T Nut for 20mm T-Slot/V-Slot 2020 by crypt0zone](/t/8291045.jpg)
M5 T Nut for 20mm T-Slot/V-Slot 2020 by crypt0zone
...t our crypto mining profitability calculator:https://crypt0.zone/calculator/s/most-profitable-coin-to-mine-1080-ti-at-this-moment
thingiverse
free
![T-slot 20x20mm, 3mm nut remix by Refic](/t/8791380.jpg)
T-slot 20x20mm, 3mm nut remix by Refic
... and removed the 'bottom' to allow to print without support or weird overhangs along the side. also decreased total size.
Axg20202
thingiverse
free
![Nerf Stryfe Bolter sight remix by axg20202](/t/8004192.jpg)
Nerf Stryfe Bolter sight remix by axg20202
... sight in the part from this kit so i remixed it. i told him it probably does nothing but he swears it increases his accuracy :-)
thingiverse
free
![SSD DIN rail mount by axg20202](/t/8369163.jpg)
SSD DIN rail mount by axg20202
...arts will need a small amount of glue when fitting together.
the clip part could be used to make other types of din rail mounts.
thingiverse
free
![Nozzle cleaner by axg20202](/t/8015136.jpg)
Nozzle cleaner by axg20202
... width to the mounting arm to compensate for this.
as per the original, standard quality print at 20% infill is fine. i used pla.
thingiverse
free
![Strengthened hot end chain connection (part B) by axg20202](/t/5033863.jpg)
Strengthened hot end chain connection (part B) by axg20202
...hicker than the original. seems to have worked.
original version (source of this remix):https://www.thingiverse.com/thing:3802593
thingiverse
free
![Incra flip fence mounting bracket by axg20202](/t/8009065.jpg)
Incra flip fence mounting bracket by axg20202
...rint because it is overengineered to be strong. it works fine in pla, but is even better in petg. infill 40%. no support needed .
thingiverse
free
![6x2 Wago 221 with cable strain relief by axg20202](/t/8344063.jpg)
6x2 Wago 221 with cable strain relief by axg20202
...e support, so may as well add it when slicing.
best to print in abs or at least petg, for strength. 0.2 resolution, 40% infill.
thingiverse
free
![Ender 3 GoPro bed mount for magnetic spring steel bed by axg20202](/t/8237876.jpg)
Ender 3 GoPro bed mount for magnetic spring steel bed by axg20202
...latively easily.
i would suggest making this out of petg as i'm not sure how well pla will stand up to the heat from the bed.
thingiverse
free
![Ender 3/Ender 3 PRO LCD offset mount by axg20202](/t/8023349.jpg)
Ender 3/Ender 3 PRO LCD offset mount by axg20202
...t from scratch, but i'd like to acknowledge that it was inspired by the thing below:https://www.thingiverse.com/thing:2923988
Incra
thingiverse
free
![INCRA hard stop knob and holder](/t/4972465.jpg)
INCRA hard stop knob and holder
...me with the incra hard stop
works with the stock knob and nut
the custom knob was designed as a light press fit onto a 10-12 shcs
thingiverse
free
![Incra Precision T-Ruler holder by gronax](/t/8248870.jpg)
Incra Precision T-Ruler holder by gronax
...onax
thingiverse
here is my incra precision t-rule holder for my tool wall.
it uses 4g screws to attach to my plywood tool wall.
thingiverse
free
![Incra Miter Gauge Fence Calibrator - 1000HD by Noobodyy](/t/8062207.jpg)
Incra Miter Gauge Fence Calibrator - 1000HD by Noobodyy
... model.
i made it with m6 metric screw and nut.
the second version of the template allows you to store hex keys securely.
enjoy !
thingiverse
free
![Mounting Brackets for Incra Miter Gauges by robertbieber](/t/8086133.jpg)
Mounting Brackets for Incra Miter Gauges by robertbieber
...ter gauge from sliding off the other two brackets. make sure you leave enough space to actually lift the gauge off the brackets.
thingiverse
free
![Incra flip fence mounting bracket by axg20202](/t/8009065.jpg)
Incra flip fence mounting bracket by axg20202
...rint because it is overengineered to be strong. it works fine in pla, but is even better in petg. infill 40%. no support needed .
thingiverse
free
![INCRA Style MakerSlide Profile Fence by naDiel](/t/8838796.jpg)
INCRA Style MakerSlide Profile Fence by naDiel
...lue part 6 and 7.
parts are designed in sketchup. i printed 3 positioner in different designes until all parts matched perfectly.
thingiverse
free
![Triton TRA-001 with Incra Plate Lift Guide tube by jbasen](/t/8856746.jpg)
Triton TRA-001 with Incra Plate Lift Guide tube by jbasen
... the 3d printed piece. this design simplifies the 3d printing portion of the project because it eliminates printing an overhang.
thingiverse
free
![Incra "Build-It" Clamp Holder for Pegboard by SkippyMcSlappyPants](/t/8626699.jpg)
Incra "Build-It" Clamp Holder for Pegboard by SkippyMcSlappyPants
...m. you can print them how you want, but the way shows removes the need for supports for part 1.
not much else to say about them.
thingiverse
free
![Incra Miter Gauge Fence Calibrator by robertbieber](/t/8077878.jpg)
Incra Miter Gauge Fence Calibrator by robertbieber
...librator_short variant is untested, but should theoretically allow you to calibrate your fence when set for 45 degree miter cuts.
Flip
design_connected
$13
![Flip](/t/4567686.jpg)
Flip
...flip
designconnected
poliform flip chairs computer generated 3d model. designed by carlo colombo.
3ddd
$1
![Flip](/t/970969.jpg)
Flip
...p
3ddd
flip , foscarini
настенный светильник.
высота - 31см
ширина - 28см
глубина - 13см
design_connected
$13
![Flip Around](/t/4570118.jpg)
Flip Around
...flip around
designconnected
menu flip around computer generated 3d model. designed by norm.
design_connected
$18
![Flip armchair](/t/4567697.jpg)
Flip armchair
...flip armchair
designconnected
poliform flip armchair computer generated 3d model. designed by colombo, carlo.
3d_export
$10
![Carveli flip](/t/13095030.jpg)
Carveli flip
...carveli flip
3dexport
turbosquid
$5
![Flip Knife](/t/13280179.jpg)
Flip Knife
...turbosquid
royalty free 3d model flip knife for download as on turbosquid: 3d models for games, architecture, videos. (1320007)
3d_export
$15
![flip knife](/t/12639760.jpg)
flip knife
... knife
3dexport
a 3d modelled, low poly flip knife made by me in blender. formats include: .obj, .stl, .ply, .fbx, .dae and .mtl
turbosquid
$10
![Flip Flops](/t/13422163.jpg)
Flip Flops
... free 3d model flip flops for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1612271)
3ddd
$1
![Flip-Top table](/t/799302.jpg)
Flip-Top table
...flip-top table
3ddd
стол
стол системы flip-top. 1600х700
turbosquid
$60
![Flip Clock](/t/13427409.jpg)
Flip Clock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Fence
archibase_planet
free
![Fencing](/t/947230.jpg)
Fencing
...fencing archibase planet fencing fence barrier fencing - 3d model for interior 3d...
archibase_planet
free
![Fencing](/t/947231.jpg)
Fencing
...fencing archibase planet fencing barrier fence fencing - 3d model for interior 3d...
archibase_planet
free
![Fence](/t/947229.jpg)
Fence
...fence
archibase planet
rail fence barrier fencing
end fence - 3d model for interior 3d visualization.
3d_export
free
![fence](/t/11422712.jpg)
fence
...de of branches and sticks, a new fence made of boards, an old fence made of boards. pivots are applied to the gate for animation.
archibase_planet
free
![Fence](/t/947232.jpg)
Fence
...fence
archibase planet
fence barrier fencing
fence-2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Fence](/t/947234.jpg)
Fence
...fence
archibase planet
fence fencing enclosure
fence-6 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Fence](/t/947236.jpg)
Fence
...fence
archibase planet
fence barrier fencing
fence-7 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Fence](/t/947237.jpg)
Fence
...fence
archibase planet
fence fencing barrier
fence 4 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
![fence](/t/11459584.jpg)
fence
...fence
3dexport
lawn fencing
3ddd
$1
![FENCE](/t/339153.jpg)
FENCE
... ковка , ограда , перила
fence
Slot
3d_export
$5
![slot handle](/t/11920767.jpg)
slot handle
...slot handle
3dexport
slot handle
archibase_planet
free
![Slot machine](/t/949246.jpg)
Slot machine
...ase planet
slot machine slot-machine playing machine
slot machine n260311 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Slot machine](/t/949245.jpg)
Slot machine
... machine slot-machine one-armed bandit
slot machine novomatic gaminator n240911 - 3d model (*.3ds) for interior 3d visualization.
3d_export
$5
![narrow slot handle](/t/11920771.jpg)
narrow slot handle
...narrow slot handle
3dexport
narrow slot handle
turbosquid
$15
![Slot Machine](/t/13343576.jpg)
Slot Machine
...oyalty free 3d model slot machine for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1710861)
turbosquid
$25
![Slot Machine](/t/13246953.jpg)
Slot Machine
... free 3d model slot machine for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1649555)
turbosquid
$25
![Coin Slots](/t/13234282.jpg)
Coin Slots
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$11
![Slotted spoon](/t/13504721.jpg)
Slotted spoon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
![Slot Sofa](/t/13342390.jpg)
Slot Sofa
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
![slotted spoon](/t/13342260.jpg)
slotted spoon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Nut
3d_export
free
![nut](/t/11496221.jpg)
nut
...nut
3dexport
low poly
turbosquid
$13
![Nut](/t/13492638.jpg)
Nut
...
royalty free 3d model nut for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1227126)
turbosquid
$12
![nut](/t/13418222.jpg)
nut
...
royalty free 3d model nut for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1175191)
3d_export
$5
![nut handle](/t/11920638.jpg)
nut handle
...nut handle
3dexport
nut handle
3d_export
$5
![nut anchor](/t/11920487.jpg)
nut anchor
...nut anchor
3dexport
nut anchor
3d_export
$5
![wing nut](/t/11920503.jpg)
wing nut
...wing nut
3dexport
wing nut
3d_export
$5
![butterfly nut](/t/11920504.jpg)
butterfly nut
...butterfly nut
3dexport
butterfly nut
3d_export
$5
![special nut](/t/11920522.jpg)
special nut
...special nut
3dexport
special nut
3d_export
$5
![nut hook](/t/11920424.jpg)
nut hook
...nut hook
3dexport
nut hook
3d_export
$5
![nut ring](/t/11920425.jpg)
nut ring
...nut ring
3dexport
nut ring
T
design_connected
$11
![T & T](/t/4567322.jpg)
T & T
...t & t
designconnected
dark t & t computer generated 3d model. designed by de ryck, christophe.
3d_export
$5
![t-800](/t/11531964.jpg)
t-800
...t-800
3dexport
t-800
3ddd
$1
![Table T](/t/994563.jpg)
Table T
...table t
3ddd
журнальный
table t
3ddd
free
![T-Rex](/t/719404.jpg)
T-Rex
...t-rex
3ddd
t-rex
rrrrrr
3d_export
$5
![t-virus](/t/11458730.jpg)
t-virus
...t-virus
3dexport
it's t-virus
3d_export
$5
![T-26T](/t/11372708.jpg)
T-26T
...t-26t
3dexport
artillery tractor on the t-26 chassis ussr
3ddd
$1
![T 45](/t/596728.jpg)
T 45
...t 45
3ddd
t-45
кабинет руководителя t 45
12 предметов
подробнее:http://www.prezident-mebel.ru/index.php?productid=1541
3ddd
free
![SAFE T](/t/741920.jpg)
SAFE T
...safe t
3ddd
огнетушитель
креативные огнетушители от компании safe t
3d_export
free
![t-rex](/t/11900170.jpg)
t-rex
...t-rex
3dexport
t-rex have normal map and base color textures
3d_export
$75
![T-55](/t/12997197.jpg)
T-55
...nally, but these improvements made the tank more efficient and lethal. the t-55 was officially adopted by the soviet army in 1958