Improved Two-Slot Fork for Unlockable Loose Filament Spool by gliech

Last crawled date: 3 years, 1 month ago

Slight improvement of switchborgs Two-Slot fork design for TheGoofys Unlockable Loose Filament Spool.
I wanted to have 2 sets of anchor holes for the 2 filament fibres. As a side-effect of my modification, the slots are now slightly wider. Luckily the wider fork is still slightly narrower than the guard on TheGoofys original disk section, so the modification is still compatible with the original design.
For more information on printing and assembly, see TheGoofys and switchborks instructions on their things.
As with switchborks model, _Original_Fork.stl was included because Filament_Spool_Dual_Fork_improved.scad needs an stl of TheGoofys original design to generate the modified version.