Improved Potsticker Press by ckc28

Last crawled date: 2 years, 10 months ago

This is an improved press for making potsticker dumplings. It replaces a commercial hand press that didn't work very well. The press is comprised of two halves that rotate together to form the dumpling and create a seal on the noodly dumpling wrapper. A circular die for cutting the wrapper is also included.
Note that the 'bearings' on either side of the press body serve to guide the press halves together during pressing, but don't link the two parts together. This simplified the part design and made it easier to clean.
Instructions:
Printing: Use PLA, as the somewhat preferred plastic for contact with food. Works well with 2 skin layers, might want to do 3 skin layers for extra strength.
Making potstickers: Lightly flour the surface as needed to prevent wrapper from sticking. If the press surfaces become wet during operation, wipe dry with a cloth to prevent sticking. Put enough filling to fill the depression in the mold like a measuring cup- enough to create a flat surface of filling and do not heap! Rotate the press closed with both hands and the body resting on the table.
Clean up: Hand wash with light soap. It's okay to run it under a faucet, but do not immerse in water in order to prevent the hollow parts from taking on water.
Don't put it in the dishwasher, as it will get waterlogged and may melt in the hot water process.
I hope you like this little tool- It really helped me to realize fresh potstickers!