ImmersionRC Nexwave UNO 2.4ghz / 5.8ghz Mount Groundstation by basalt1987

... is a tripod mount for the immersionrc uno 5.8ghz receiver. it fit's on tripods with a 31.8mm base (quick release system).

... edit (6/7/15): added new modified tray with vtx holder. holds immersionrc 600mw 5.8ghz vtx. also have a version to hold xt60.

...5.8ghz 25mw vtx for re-transmitting to my goggles. mounts directly to my my tripod with the integrated tripod quick release plate

... mount for geprc lx5 leopard 220mm frame by jszewczyk thingiverse immersionrc tramp vtx mount for geprc lx5 leopard 220mm frame.

...ed 5.8 ghz case and relocated dip switch access. updated version with correct dimensions:http://www.thingiverse.com/thing:1269670

...0mw version for the central antenna mount of 25mw vtx. split the object with your slicer if you want to print on half at a time.

...vtx holder by mikeller thingiverse holder for a 5.8ghz vtx module. fits onto a 30.5 mm square stack.

...5.8ghz transmitter case by clem_v thingiverse immersionrc 5.8ghz transmitter case - linked to project : new drone from phantom 2

... vast amount of mounting options including the suction cup. the most popular method would be to use the gopro-to-tripod adapter.

...le sided gel tape. this is not the final version. i have a version with a snap on lid. not completed yet still needs som tweaks.

...rse roborock s7 bumber extension 5mm / 7,5mm / 10mm / 10,5mm / 15mm roborock s7 kletterschutz 5mm / 7,5mm / 10mm / 10,5mm / 15mm

...hrungen am holzgestell. einmal als einzelnes, dünnes teil und einmal in dicker ausführung falls beide durchführungen defekt sind.

...ng:2544186 dial indicator:https://www.banggood.com/0_01mm-accuracy-measurement-instrument-dial-indicator-gauge-tool-p-948936.html

...- original shroud by brandon__ thingiverse a remix of basalt1987#39;s great dial indicator holder, modified to fit on cr10...

...3/8" shank, not 8mm) by danmartin6031 thingiverse remix of basalt1987#39;s dial indicator with two changes: 1) works with imperial...

...nexwave rx case by arturas_raila thingiverse remixed from https://www.thingiverse.com/thing:1196534 cover for nexwave rx module.

... dominators. this one allows you to change the switches and see the settings of the different bands. tested on dom v1, v2 and v3.

...frequency. i simply popped it into my headset and set it through the goggle interface rather than adding a stand-alone interface.

...the tip top of the cover can get melty, so you might need to add a minimum dwell between layers depending on your print settings.

...fatsharkhd. i also added a version with a little hole for being able to reach the rx-band-switches with the cover still attached.

...camera pal/ntsc i used fatshark dominator v3 glasses with nexwave 5g8 race band receiver module. instruction: all parts printed...

...mall at 10428 118 ave edmonton,ab includes: abc weddings nexwave video games the blind duck plaza bowl derks formal...

... mcneil electrical design. usb wifi card in the back of the antenna. spacers 3d printed. pcbs manufactured on a pcb-cyklon mill.

...for use with aps remote contriol pcb and battery http://alienpowersystem.com/shop/radio-transmitters/alien-power-system-2-4ghzelectric-skateboard-remote-control/ ...

...the crazyradio 2.4ghz nrf24lu1+ usb radio dongle with antenna: https://www.amazon.com/crazyradio-pa-2-4ghzdongle-antenna/dp/b00qbp5242/ prints on makerbot replicator 2: high quality: 53 min...

...zigzagjoe thingiverse https://docs.google.com/document/d/1_rdjw_5bxjvemaujwaoiev8gmxprbspwe7w8akjggb4/edit 2.3ghz i5 4200u (dual core, hyperthreading) 4ghz ddr3l (soldered) sandisk u100 16gb ssd hp nc365t quad...

...the default gear renders in 50 seconds on my 4ghz desktop computer. just for reference. customizer doesn't want to...

...ttl modules for use with zigbee2mqtt boards available here https://www.aliexpress.com/item/cc2530-zigbee-module-uart-wireless-core-board-development-board-cc2530f256-serial-port-wireless-module-2-4ghz32767470382.html ...

...found this model on reddit.https://www.reddit.com/r/amd/comments/62isdm/3d_printer_files_for_corsairs_asetek_aio_brackets/ original file is posted herehttp://www.overclock.net/t/1624139/official-ryzen-7-1800x-1700x-1700-owners-club-4ghzclub/7100#post_25971424 i downloaded the sldprt file and converted it to...

...orange rx dsmx diy modul mit einem 2s/600mah lipo verbaut.https://hobbyking.com/en_us/orangerx-dsmx-dsm2-compatible-2-4ghzdiy-transmitter-module.html angeschlossen wird das modul an die ppm out buchse...

...controller : http://www.dx.com/p/crius-mwc-multiwii-se-v2-5-version-multi-copter-4-axis-main-flight-control-board-blue-227394#.v8poyvmltiu motors : http://www.dx.com/p/4-x2804-2280kv-cw-ccw-brushless-motor-4-15a-esc-2-pairs-of-6045-3-leaf-nylon-propeller-set-382471#.v8pqlvmltiu rc system : http://www.dx.com/p/flysky-fs-t6-2-4ghz6-ch-2-9-lcd-tx-transmitter-rx-receiver-radio-control-system-black-8-x-aa-178448#.v8pq2pmltiu firmware :...

...thingiverse cx-12r:https://www.conrad.de/de/empfaengermodul-svs-nachrichtentechnik-0125001-reichweite-max-im-freifeld-1000-m-2-vdc-36-vdc-192443.html pic 16f628a:https://www.conrad.de/de/embedded-mikrocontroller-pic16f628a-ip-pdip-18-microchip-technology-8-bit-20-mhz-anzahl-io-16-165038.html motoren:https://www.amazon.de/gp/product/b00lcv4xuo/ref=oh_aui_detailpage_o06_s00?ie=utf8&psc=1 ladechips:https://www.amazon.de/gp/product/b00sr4fh4a/ref=oh_aui_detailpage_o04_s00?ie=utf8&psc=1 fahrtregerer:https://www.amazon.de/gp/product/b00k67w8mu/ref=oh_aui_detailpage_o09_s00?ie=utf8&psc=1 gewichte:https://www.amazon.de/gp/product/b00ijfxmia/ref=oh_aui_detailpage_o00_s00?ie=utf8&psc=1 kamera:https://www.amazon.de/gp/product/b00iextoma/ref=oh_aui_search_detailpage?ie=utf8&psc=1 kamerasender:http://www.ebay.de/itm/2-4ghz1ch-1-3-cmos-mini-kabellose-lochkamera-spionkamera-/230913888405?hash=item35c38a5095:g:i7eaaoswajvursuu ...

...s the tbs groundstation with the rear bracket to a 28mm tube for mounting on a tripod, allowing the antenna to remain on the head

... v2 mit angeformter stativplatte sicht über dys-monitor-brille oder fatshark; plus version mit kabeldurchführung und beschriftung

... or similar. backside or frontside mounting posibility. bracket is mounted on the rvgs in the sides ordinary mounting screws.

...groundstation holder for photo tripod by nielserik thingiverse fits on a photo tripod. holds a fpv video rx, and a battery

...od lcd mount (fpv groundstation ) by ize thingiverse simple way to convert a camera trepod to a fast to assembly ground station.

...t printed 1/4" thread pilot hole for 1/4" thread bars in the front are due to cura not building support material there.

... dharryh thingiverse lipo holder for long range setup mounted on a tripod leg (diameter 22 mm) inside dimension 155 x 55 x 37 mm

...verse this is a vtx holder for the tbs ground station. hole for the mounting screw is 1mm too small and needs to be drilled out.

... gopro mounting to attach to the tripod awg20-ish wiring female pinheaders (to passthrough the module's pins to the backside)

... module. you will also need: 2x pololu regulator 1x lc filter ( optional ) 1x throw switch 1x oversized segment display voltmeter

...meet the shore 40d to 95a hardness. cover designed for antenna: https://actuna.com/actuna-pagoda-2-antenna-fpv-5-8ghz-rhcp-p12564

...mount x fpv camera combo by wahgor thingiverse cam) https://hobbyking.com/en_us/adjustable-power-25mw-200mw-48ch-fpv-5-8ghzwireless-camera.html frame)...

...meet the shore 40d to 95a hardness. cover designed for antenna: https://actuna.com/actuna-pagoda-2-antenna-fpv-5-8ghz-rhcp-p12564

...camera by spudwood thingiverse flight controllerhttps://hobbyking.com/en_us/frf3-evo-brushed-flight-controller-with-integrated-frsky-compatible-receiver.html motorshttps://hobbyking.com/en_us/brushed-motor-4-pcs-per-set.html propellershttps://hobbyking.com/en_us/inductrix-compatible-props-blue-color.html https://hobbyking.com/en_us/vm275t-5-8ghz-25mw-48ch-ntsc-pal-mini-vtx-600tvl-fpv-camera-micro-fpv-whip-antenna.html camerahttps://hobbyking.com/en_us/vm275t-5-8ghz25mw-48ch-ntsc-pal-mini-vtx-600tvl-fpv-camera-micro-fpv-whip-antenna.html ...

...flysky fs-t6 (ou autre...) screen holder for flysky, fpv http://fr.aliexpress.com/item/fpv-combo-system-5-8ghz5-8g-200mw-transmitter-receiver-no-blue-hd-fpv-monitor-900tvl/32491696264.html ...

...est fixé avec des vis/écrous m3 model de fpv: https://fr.aliexpress.com/item/2016-new-fpv-kit-combo-system-5-8ghz5-8g-600mw-transmitter-ts832-and-receiver-800x480/32715709173.html?spm=2114.13010608.0.0.tnhdmd ...

...https://www.getfpv.com/sma-to-ufl-cable-50mm.html xilo axii long range 5.8ghz antenna (rhcp) -- https://www.getfpv.com/xilo-axii-long-range-5-8ghzantenna-rhcp.html ...

...by williecdog thingiverse lens cap for vm275t mini camera (https://hobbyking.com/en_us/vm275t-5-8ghz25mw-48ch-ntsc-pal-mini-vtx-600tvl-fpv-camera-micro-fpv-whip-antenna.html) if it is too tight or too loose to...

...a similar sized camera may also be fitted. *) https://de.aliexpress.com/item/long-range-fpv-combo-system-5-8ghz600mw-transmitter-receiver-no-blue-800x480-monitor-xiao-yi/32393196981.html the gopro mount can be found here:...

...camera on a x90 brushless micro quadrocopter frame. camera: https://www.aliexpress.com/item/akk-a5-5-8ghz40ch-25mw-fpv-transmitter-600tvl-cmos-micro-camera-switchable-raceband-for-drone/32826867668.html frame:...

...immersionrc powerplay thingiverse a step file of the powerplay from immersionrc.

...rsionrc 250mw by askmike72 thingiverse holder for the zmr250 frame and immersionrc 200mw transceiver. fits to the front or rear.

...immersionrc vortex 150 plate by raar thingiverse just a simple immersionrc vortex 150 plate/bumper

...0mw transmitter holder by earlprinter thingiverse this is a video transmitter holder built for an immersionrc 250mw transmitter.

...immersionrc duo 4.1 - holder by bartwaw thingiverse made to hold on quantum v2 gogles my immersionrc duo

...ampe thingiverse frame oberteil für immersionrc vortex zum download als -freecad -dwg -stl -dxf viel spass. www.ossilampe.de

...5.8ghz transmitter case by clem_v thingiverse immersionrc 5.8ghz transmitter case - linked to project : new drone from phantom 2

... by shawn_1976 thingiverse this fits the immersionrc ezods board. any problems please comment, this is my first drawing uploaded

...z thingiverse motors protections with an extreme design for immersionrc apex, they fit good for motors with a 29mm diameter bell

...nsmitter holder by earlprinter thingiverse this is a video transmitter case designed for an immersionrc 600mw video transmitter.

...forma / uno 3ddd forma кресло uno фабрики forma

...dellarovere uno 3ddd dellarovere , стол стол рабочий dellarovere uno (220x100x74)

...diaz uno green 3ddd meridiani diaz uno green by meridiani

...alty free 3d model arduino uno for download as , stl, and wrl on turbosquid: 3d models for games, architecture, videos. (1515932)

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

... smania , eclectic-uno стеллаж smania eclectic-uno

...r download as 3ds, dxf, obj, xsi, wrl, fbx, dwg, dae, and skp on turbosquid: 3d models for games, architecture, videos. (1366181)

...fiat uno s 3dexport

...borán fastferry. it is modeled for the "accidentes marítimos" serie in youtube. v-ray rendering. formats: fbx, obj, mtl

...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

...fuji turbosquid free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)

...headphone mount lr 3dexport headphone mount l+r

...quid royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)

...quid royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)

...uid royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)

...pro mount 3dexport cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.

...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)

...urbosquid royalty free 3d model rock 5-5 for download as obj on turbosquid: 3d models for games, architecture, videos. (1639063)

...hinge 5 3dexport hinge 5

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

...hic digit 5 number 5 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389333)

...5 роз 3ddd 5 роз в стеклянной вазе

...iphone 5 designconnected apple iphone 5 computer generated 3d model.

...lola 5 3ddd miniforms lola 5 miniforms 300*65*134

...dd nexus , phone , телефон google nexus 5 phone

...iphone 5 3docean 3d 4d apple cinema iphone model modeling phone screen texture iphone 5 3d model and texture realistic iphone 5.

...no 2 designconnected sibast no 2 computer generated 3d model. designed by sibast, helge.

...uid royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)

...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)

...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.

...кровать, 2 тумбочки, 2 светильника 3ddd кровать, 2 тумбочки, 2 светильника нормальное качество формат 3ds max без текстур

...кровать, 2 тумбочки, 2 светильника 3ddd кровать, 2 тумбочки, 2 светильника нормальное качество формат 3ds max без текстур