ImmersionRC 600mw Video Transmitter Holder by EarlPrinter

...s. adds flat surfaces to velcro to. check out my new design for better antenna support:http://www.thingiverse.com/thing:865127

...sionrc 600mw video transmitter grabcad you can open the step file as one single file, and use it to model those crazy fpv models

...rst person view) . remixed from http://www.thingiverse.com/thing:99048 this edition is smaller and has a different antenna hole

...la turnigy 2s 1,000mah battery pack and immersionrc fpv transmitter 5.8ghz 600mw, for dji inspire 1 for front camera print in pla

...s. the transmitter is held in place by slots in the case and is secured using the antenna connector (my antenna has an adapter)

...ectrical tape so that they wouldn't interfere with my velcro. make sure the zip tie at the connector is as tight as possible.

...0mw transmitter holder by earlprinter thingiverse this is a video transmitter holder built for an immersionrc 250mw transmitter.

...mersionrc 600mw 5.8 ghz transmitter case by squartochi thingiverse this is a vertical tx case i use for my 250 size quad-copter.

...0mw version for the central antenna mount of 25mw vtx. split the object with your slicer if you want to print on half at a time.

...imosd combined holder by lubis thingiverse a holder/box where the immersionrc 600mw and minimosd are stacked on top of eachother

... settings of 0.1mm layer height, infill of 20%, and a hot nozzle temperature. i printed this in pla but abs would work well too.

... can see all of the screen. printed using a layer height of 0.25mm/70mmps (as i wanted speed over quality) and an infill of 10%.

...lves. to stick the indicator down onto the battery (and thus together) you can use double sided tape or regular all purpose glue.

...rature of 70 degrees. does not need any supports. please let me know how you get on with printing this. all feedback is welcome!

...r 25%. also watch out for warping which can occur with large prints. to print this model it takes approximately 2.5hours. enjoy!

... much as this print does not need any infill. any feedback would be great so please let me know how you get on with these prints.

...ould be fine. note: i always print this with a brim to make it adhere to the build bed much better. i haven't tried without.

... i used a density of only 10%. if you like this print you may also like my prints of wentworth woodhouse and heveningham hall.

...nts in the best quality when you rotate the model in your slicer by 90deg so that the prop arc is perpendicular to the build bed.

...0mw transmitter holder by earlprinter thingiverse this is a video transmitter holder built for an immersionrc 250mw transmitter.

...ed this so i could mount a vtx inside my trx4 for some fpv crawling. worked out great. i also made a axii stubby antenna holder

...same case/mounting interface. -qty 1 vtx: akk x1 5.8g 25mw/200mw/600mw switchable fpv transmitter with push button and digital display...

...iam probably the only one still using a immersion 600mw vtx i also included a blank model of the...

...thingiverse my take on a protector for the irc 600mw 5.8ghz vtx. when you screw on your antenna, it...

...rst person view) . remixed from http://www.thingiverse.com/thing:99048 this edition is smaller and has a different antenna hole

...added new modified tray with vtx holder. holds immersionrc 600mw 5.8ghz vtx. also have a version to hold...

...receiver spektrum tl1000 telemetry + spma9575 altitude sensor goolrc 600mw tx40 transmitter eachine 1000tvl camera 12 x 18650 2600mah...

...list wpl hilux c14 kithttps://www.banggood.com/wpl-c14-2_4g-four-drive-climber-rc-car-kit-with-servo-motor-p-1254503.html?p=dg23031123036201501p mobius minihttps://www.banggood.com/mobius-mini-1080p-110-degree-wide-angle-super-light-fpv-full-hd-camera-dashcam-60fps-h_264-avc-p-1092165.html?p=dg23031123036201501p mini 5.8ghz vtxhttps://www.banggood.com/ts5828s-micro-vtx-5_8g-600mw48ch-mini-fpv-transmitter-sma-rp-sma-for-rc-racer-p-1127468.html?p=dg23031123036201501p or 2in1 vtx with camerahttps://www.banggood.com/eachine-tx03-super-mini-025mw50mw200mw-switchable-aio-5_8g-72ch-vtx-600tvl-13-cmos-fpv-camera-p-1104884.html?p=dg23031123036201501p m5 nutshttps://www.banggood.com/suleve-mxsn1-50pcs-stainless-steel-metric-coarse-pitch-screw-thread-hexagon-nuts-m2-m3-m4-m5-m6-p-1262060.html?p=dg23031123036201501p gopro knob...

...fpv thingiverse just a quick and easy irc tramp 600mw mounting (old version) because i hated how the vtx...

...in 1 esc. transmitter can be bought from banggood: https://www.banggood.com/ts5828s-micro-vtx-5_8g-600mw48ch-mini-fpv-transmitter-sma-rp-sma-for-rc-racer-p-1127468.html?rmmds=search&id=511528&cur_warehouse=cn ...

...acal51 thingiverse this is a mount for the new immersionrc ghost qtee antenna. i used tpu with supports. slide...

...irc ghost atto 20mm stack mount by luftfahrzeugfernfuerer thingiverse immersionrc ghost atto receiver mount for 20x20mm stack. shrink tube...

...qtee universal standoff angled mount by dialeksi thingiverse universal immersionrc ghost qtee antenna rear standoff mount. horizontal mount with...

...gopro hero 5/6/7 mount is a remix of https://www.thingiverse.com/thing:3223338 immersionrc ghost qtee antenna mount is a remix of https://www.thingiverse.com/thing:4619066...

...powerplay mount by buzkill thingiverse remix to fit a immersionrc powerplay instead of an fpv...

...antenna should fit gps: bn-180 rx: crossfire nano rx immersionrc ghost crossfire diversity rx props: gemfan 5125 batteries: 650-1050mah...

...lections/universal-mount credits to haku3d https://www.thingiverse.com/haku3d/designs since he did the harder part of this thing.

... tips are most welcome https://www.paypal.com/paypalme/haku3d and will encourage me to make more designs for everyone to benefit.

...rlpablo thingiverse allows you to mount your powerplay dvr to your tx16s pots. use double-sided tape on top, optional on bottom.

... height you print it at. i printed this with matt black pla and glow in the dark pla: https://www.youtube.com/watch?v=syazqcxzwwc

...project vanguard rocket navy satellite optical sensors weather relay transmitter space orbit vanguard iii satellite 3d model visualmotion 85062...

...dish 3d model archive3d satellite dish downlink transmitter satellite - dish - 3d model for interior 3d...

...air intake, one aeration system, two air pipes, one antenna/transmitterreceiver, one satellite dish and...

...project vanguard rocket navy satellite solar panel weather relay transmitter space orbit vanguard i satellite 3d model visualmotion 85060...

...walkie talkie 1 3d model 3dexport transceiver transmitter walkie-talkie walkietalkie voice communications radio station antenna cell phone...

...walkie talkie collection 3d model 3dexport transceiver transmitter walkie-talkie walkietalkie voice communications radio station antenna cell phone...

...cord vintage old communication mobile handset hand set audio transmitter public transceiver ring sound headset cell telephone handle 3d...

...rocket navy satellite solar panel optical sensors weather relay transmitter space orbit vanguard ii satellite 3d model visualmotion 85061...

...cell brick communication portable old 1980s 1990s electronics receiver transmitter retro mobile brick phone 3d model boscorelli3d 78520...

...3dexport building structure telecom radio aerial antenna mast dish transmitter masts mobile phone mast phone 3d model tartino 1961...

...cup holder 3d model 3dexport cup holder kitchen utility's cup holder 3d model kingnin27 70463 3dexport

...furniture closets middle tower display keyboard books folders paper holder clock lamp pen office set 10 3d model humster3d...

...model 3dexport accessory bath toilet room interior soap lotion holder brush dish tissue design home liquid paper roll fixture...

...wadding: polyester hollow fibre wadding, non-woven polypropylene bed slat holder polypropylene plastic bed slats: beech- or birch veneer, beech...

...находятся модели: raven string lights london glass hurricane candle holder carved wood ravens black branch artificial wreath 296 509...

...white candle holder set 3ddd подсвечник белые керамические подсвечники

... держатель , ложка держатель и ложка от фирмы alessi размеры - 15 х 9 х 3,5 см

...3d model 3dexport document tray office stationery desk accessories holder work organizer organisation filing in out kiv processing storage...

... general decor suspended candlestick holder 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl quartor 103576 3dexport

... accessories house cogwheel pencil holder 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl cayman307 108406 3dexport

...3dexport google chromecast media wi-fi player show films music video usb google chromecast 3d model humster3d 90926...

...materials detailed vehicle camouflage military hmmwv woodland 3d model video fx universe 33420...

...3d model 3dexport european europe building city town videogame video house commercial store residential architecture shop apartment lowpoly low...

...low polygonal 3d model of rpg-7 good choice for video games possible in: c4d r11, c4d r15, max 2010,...

...my new project! sony xperia z5 3d model for video copilot’s element3d in all colors with high quality. thank...

...polygonal 3d model of church. good choice for visualizations, video games and etc. possible in: c4d r11, c4d r15,...

...model of ferry building good choice for arhitecture vizualisations, video games and etc. possible in: c4d r11, c4d r15,...

...apple imac retina 5k 27-inch – 3d model for video copilot’s element3d with magic keyboard, magic mouse 2 and...

...iphone6 mobile new phone smartphone tablet touch touchscreen trend video watch iphone 6 model will be available shortly !!!...

...3d model of pumpjack good choice for arhitecture vizualisations, video games and etc. possible in: c4d r11, c4d r15,...