CG Trader
ImmersionRC 58GHz 600mw Tx Case
by CG Trader
Last crawled date: 1 year, 10 months ago
This is Version 1 of this case design. I started on this project after a friend and I both broke our video transmitter antenna connector off of the board. This case adds support around the connector and antenna, allowing you to position the antenna or take a crash without putting stress where the connector meets the board. You can cleary see the power LED light, easy access to the tx channel dip switches, and you can plug and unplug the camera and power connectors to the board without having to take the case off. I will be making improvements on this case in the future. It is currently fully functional, the tx fits nices and snug inside. Stay tuned for updates. Weight printed in ABS was 11.4g both parts together. I also highly recommend you put 5min epoxy over the pins that connects the plug to the board for added support. The solder alone is the only thing holding those pins to the board. 600mw tx case immersion rc fpv sport hobby equipment sports
Similar models
thingiverse
free
ImmersionRC 5.8GHz 600mw Tx Case by Mikeycantoon
... pins that connects the plug to the board for added support. the solder alone is the only thing holding those pins to the board.
thingiverse
free
ImmersionRC 5.8Ghz Audio/Video Transmitter Case (600mW) by cfeniak
...s. adds flat surfaces to velcro to.
check out my new design for better antenna support:http://www.thingiverse.com/thing:865127
thingiverse
free
Immersion 600mw vTx case by TheCure
...immersion 600mw vtx case by thecure
thingiverse
designed to protect antenna sma connector
thingiverse
free
ImmersionRC 5.8Ghz Audio/Video Split Transmitter Case (600mW) by cfeniak
...ectrical tape so that they wouldn't interfere with my velcro.
make sure the zip tie at the connector is as tight as possible.
thingiverse
free
Nano Talon Omnibus FC support (no screws required , plug n play) by Alextattoo
...
the plate itself is very tight so no need of any additional screws or whatever to be fixed to the pane, just plug it and flight.
thingiverse
free
ProMicroHousing by MakerMaik
... case, too. therefore you do not need screws to close the case. if the gap is aligned to your printer the cap holds without glue.
thingiverse
free
Updated RAMPS 1.4 case for Taurino and RAMPS 1.4 shield by kenaaker
...40mm fan that can be driven off the arduino power connectors. i didn't put in any openings for the lcd controller or sd card.
thingiverse
free
DJI Phantom 2 ImmersionRC 600mw transmitter mount by loopee
...s.
the transmitter is held in place by slots in the case and is secured using the antenna connector (my antenna has an adapter)
thingiverse
free
Nucleo ST-Link Case by strv
....
in the photo, i modified connector from pin header to jst eh for swd. this connector is small enough to mount to the position.
thingiverse
free
P-clip Solidoodle power cable support by clarionut
...rs to the case to raise it 2.5-3cm. this will clear the p-clip and also give much more space for the filament above the extruder.
58Ghz
turbosquid
$5
RC805 58Ghz AV Receiver
...y free 3d model rc805 58ghz av receiver for download as sldas on turbosquid: 3d models for games, architecture, videos. (1173904)
thingiverse
free
Armattan Rooster TBS Unify 5V VTX FrSky R-XSR Buzzer Mount by FlyingAboo
...parallel) vtx: tbs unify pro 5g8 5v v3 5.8ghz: https://www.hobbyrc.co.uk/tbs-unify-pro-5g8-v3-58ghzmini-fpv-transmitter-sma-2 receiver:...
thingiverse
free
Mounting plate for Dji Phantom 1 and Gopro Hero3 Brushless Gimbal Camera Mount by onne1951
...later today an test if it fits 2015-01-04 http://www.ebay.co.uk/itm/gopro-hero3-brushless-gimbal-camera-mount-for-dji-phantom-walkera-qr-x350-fpv-/271412128174?sspagename=adme:l:ou:us:3160 http://www.modellhobby.com/video-sandare/7372-boscam-58ghzav-sandare-200mw.html ...
cults
free
Polycarbonate protection Camera FPV Super Mini 25mW Eachine TX01 / TX02 200mw
...super mini 25mw eachine tx01 / tx02 200mw cults 58ghz camera_mount drone eachine flitetest fpv fpv_camera fpv_camera_mount miniature multirotor...
grabcad
free
PiratFrames - Sloop V3 - Support antennes VTX - True RC
...grabcad support antennes vtx pour antennes true rc : https://www.drone-fpv-racer.com/antenne-truerc-singularity-58ghzmmcx-90-lhcp-5570.html ...
600Mw
thingiverse
free
Lumenier TX5G6R Mini 600mW 5.8GHz VTX Holder by Maxxborg
...ed this so i could mount a vtx inside my trx4 for some fpv crawling. worked out great. i also made a axii stubby antenna holder
thingiverse
free
FPV Prototank with Turret by ChisTompso
...same case/mounting interface. -qty 1 vtx: akk x1 5.8g 25mw/200mw/600mw switchable fpv transmitter with push button and digital display...
thingiverse
free
Micro Nano Skyhunter canopy by Yannicflight
...iam probably the only one still using a immersion 600mw vtx i also included a blank model of the...
thingiverse
free
Immersion RC 5.8 GHz 600 mW VTX Case by SGT_Stadenko
...thingiverse my take on a protector for the irc 600mw 5.8ghz vtx. when you screw on your antenna, it...
thingiverse
free
FAT SHARK Video Transmitter Mount for DJI PHANTOM - FPV / UAV, 600mW edition by poma
...rst person view) .
remixed from http://www.thingiverse.com/thing:99048
this edition is smaller and has a different antenna hole
thingiverse
free
FrSky D4R-II ZMR Mount by sp3cialk
...added new modified tray with vtx holder. holds immersionrc 600mw 5.8ghz vtx. also have a version to hold...
thingiverse
free
T400 Quadricopter by ccarrasco
...receiver spektrum tl1000 telemetry + spma9575 altitude sensor goolrc 600mw tx40 transmitter eachine 1000tvl camera 12 x 18650 2600mah...
thingiverse
free
WPL 1/16 Hilux C14 FPV Gopro Mobius Mount by edwardchew
...list wpl hilux c14 kithttps://www.banggood.com/wpl-c14-2_4g-four-drive-climber-rc-car-kit-with-servo-motor-p-1254503.html?p=dg23031123036201501p mobius minihttps://www.banggood.com/mobius-mini-1080p-110-degree-wide-angle-super-light-fpv-full-hd-camera-dashcam-60fps-h_264-avc-p-1092165.html?p=dg23031123036201501p mini 5.8ghz vtxhttps://www.banggood.com/ts5828s-micro-vtx-5_8g-600mw48ch-mini-fpv-transmitter-sma-rp-sma-for-rc-racer-p-1127468.html?p=dg23031123036201501p or 2in1 vtx with camerahttps://www.banggood.com/eachine-tx03-super-mini-025mw50mw200mw-switchable-aio-5_8g-72ch-vtx-600tvl-13-cmos-fpv-camera-p-1104884.html?p=dg23031123036201501p m5 nutshttps://www.banggood.com/suleve-mxsn1-50pcs-stainless-steel-metric-coarse-pitch-screw-thread-hexagon-nuts-m2-m3-m4-m5-m6-p-1262060.html?p=dg23031123036201501p gopro knob...
thingiverse
free
IRC Tramp VTX Side Mount / Case - Nano Talon - FPV
...fpv thingiverse just a quick and easy irc tramp 600mw mounting (old version) because i hated how the vtx...
thingiverse
free
FPV Transmitter Mount DJI 450
...in 1 esc. transmitter can be bought from banggood: https://www.banggood.com/ts5828s-micro-vtx-5_8g-600mw48ch-mini-fpv-transmitter-sma-rp-sma-for-rc-racer-p-1127468.html?rmmds=search&id=511528&cur_warehouse=cn ...
Immersionrc
thingiverse
free
iFlight Nazgul5 Ghost qTee Mount by Acal51
...acal51 thingiverse this is a mount for the new immersionrc ghost qtee antenna. i used tpu with supports. slide...
thingiverse
free
IRC Ghost Atto 20mm stack mount by Luftfahrzeugfernfuerer
...irc ghost atto 20mm stack mount by luftfahrzeugfernfuerer thingiverse immersionrc ghost atto receiver mount for 20x20mm stack. shrink tube...
thingiverse
free
Ghost qTee universal standoff angled mount by DiAleksi
...qtee universal standoff angled mount by dialeksi thingiverse universal immersionrc ghost qtee antenna rear standoff mount. horizontal mount with...
thingiverse
free
Need 4 Quad (n4q.cz) Striga - GoPro 6, DJI AU Antennas, IRC qTee by izzzy26
...gopro hero 5/6/7 mount is a remix of https://www.thingiverse.com/thing:3223338 immersionrc ghost qtee antenna mount is a remix of https://www.thingiverse.com/thing:4619066...
thingiverse
free
QX7 PowerPlay Mount by buzkill
...powerplay mount by buzkill thingiverse remix to fit a immersionrc powerplay instead of an fpv...
thingiverse
free
The #MiniLongRange - 5" Ultralight FPV [Beta Version] by Dave_C_FPV
...antenna should fit gps: bn-180 rx: crossfire nano rx immersionrc ghost crossfire diversity rx props: gemfan 5125 batteries: 650-1050mah...
thingiverse
free
ImmersionRC PowerPLAY universal mount by ascii_ch
...lections/universal-mount
credits to haku3d https://www.thingiverse.com/haku3d/designs since he did the harder part of this thing.
thingiverse
free
ImmersionRC Ghost Atto TPU folding holder by Haku3D
...
tips are most welcome https://www.paypal.com/paypalme/haku3d and will encourage me to make more designs for everyone to benefit.
thingiverse
free
RadioMaster TX16S ImmersionRC PowerPlay Mount by karlpablo
...rlpablo
thingiverse
allows you to mount your powerplay dvr to your tx16s pots. use double-sided tape on top, optional on bottom.
thingiverse
free
ImmersionRC Ghost logo by Haku3D
... height you print it at.
i printed this with matt black pla and glow in the dark pla: https://www.youtube.com/watch?v=syazqcxzwwc
Tx
3ddd
$1
Brilliant / Flexagon
...flexagon 3ddd brilliant современная лампа фабрики brilliant (германия) сайт фабрики:http://www.brilliant-ag.de/nc/ru/produkte/produktdetails.html?txblvxmlimporter_pi1%5bpf_search_mode%5d=show&tx;_blvxmlimporter_pi1%5bpf_category%5d=4&tx;_blvxmlimporter_pi1%5bpf_color%5d=all&tx;_blvxmlimporter_pi1%5bpf_flames%5d=all&tx;_blvxmlimporter_pi1%5bpf_socket%5d=all&tx;_blvxmlimporter_pi1%5bpf_bulbtype%5d=d45&tx;_blvxmlimporter_pi1%5bproduct_id%5d=5555 ...
3ddd
$1
DC Shoes - Flash TX
... кеды , кроссовки
10 расцветок + коробка. можно вкл/выкл турбосмус. 46 размер :)
3ddd
$1
Philips и Panasonic
...красавца, жк philips led 40pfl9705h и плазменный panasonic viera txp46z1. fbx 3 мб и сцена 2 мб, с текстурами...
3ddd
$1
VILLERROY&BOCH Single bowl sinks
...single bowl sinks 3ddd мойка , villeroy & boch http://pro.villeroy-boch.com/en/au/home/kitchen/products/elements.html?txmmpdu_profiportal%5bfilter%5d%5bmodel%5d=632061&tx;_mmpdu_profiportal%5baction%5d=detail&tx;_mmpdu_profiportal%5bcontroller%5d=profiportalkitchen&chash;=db1da66c72e55698e988fa209d85a6f7 ...
3ddd
$1
Lab chair
...lab chair 3ddd раскладной http://www.inno.fi/index.php?id=29499&no;_cache=1&tx_improductparcer_pi1[next]=3# ...
3ddd
free
Domus
...domus 3ddd domus http://www.domus-licht.de/index.php?id=52&tx_commerce_pi1%5bshowuid%5d=123&tx;_commerce_pi1%5bcatuid%5d=16&chash;=37e0da14ec8d780c588deed6eaebac62 ...
3ddd
$1
DURAVIT Darling New Bidet + single lever bidet mixer KLUDI ZENTA
...darling new #224915 размеры: 370х540http://www.duravit.com/products/all_series/darling_new.com-en.html?product=592281 смеситель фабрики kludi модель: zentahttp://www.kludi.com/lang-en/catalog-int/products/bidet/fittings.html?txmmsddproductimport_pi1%5bproduct%5d=9466&tx;_mmsddproductimport_pi1%5bserie%5d=9&tx;_mmsddproductimport_pi1%5baction%5d=product&tx;_mmsddproductimport_pi1%5bcontroller%5d=product&chash;=f180dae4e644591a00d176d470a6de2c ...
humster3d
$75
3D model of Foton Auman TX Tractor Truck 2012
...del of foton auman tx tractor truck 2012 in various file formats. all our 3d models were created maximally close to the original.
humster3d
$75
3D model of Foton Auman TX (1621) Chassis Truck 2-axle 2012
...uman tx (1621) chassis truck 2-axle 2012 in various file formats. all our 3d models were created maximally close to the original.
humster3d
$15
Foton Auman TX (1621) Chassis Truck 2-axle 2012 Blueprint
...12 blueprint 3d model in the format you need. all our 3d models was created on real car base and maximally close to the original.
Case
3d_export
$8
Iphone 6 case Batman 3D Model
... model
3dexport
iphone iphone6 case batman smarthphone gadgets phone cases
iphone 6 case batman 3d model ffranco95 88201 3dexport
3d_export
$10
Flask with leather case 3D Model
...flask with leather case 3d model
3dexport
flask case
flask with leather case 3d model valgrush63640 93243 3dexport
3d_export
$59
Old workbag 3D Model
...beach travel trip dress clothes wheels people airport plane briefcase old work old workbag 3d model dzejsi.models 72700...
3d_export
$12
Shelf MAX 2011 3D Model
...shelf max 2011 3d model 3dexport books cd case lamp bookshelf modern wood art colours furniture livingroom house...
3d_ocean
$9
Workplace Low Poly
...workplace low poly 3docean book case computer cup desk grass keyboard lamp mouse phone picture...
3d_ocean
$15
Apple watch v1
...apple watch v1 3docean aluminum apple band blue buckle case classic clock edition gold iphone iwatch modern silver sport...
3d_ocean
$15
Apple watch v5
...apple watch v5 3docean aluminum apple band blue buckle case classic clock edition gold iphone iwatch modern silver sport...
3d_export
free
Download free Curio Cabinet 3D Model
...cabinet 3d model 3dexport curio cabinet furniture wood display case shelf shelves knickknacks curio cabinet 3d model download free...
3d_export
$15
Toothpick Holder 3D Model
...cocktail stick wooden bamboo clean oral pick casing holder case tube carry key chain toothpick holder 3d model download...
3d_ocean
$4
i Phone Casing
...i phone casing
3docean
casing i phone i phone casing phone casing
i phone casing,casing,i phone,phone casing