Thingiverse
![Ikea RIBBA Led Frame by DasUbrot](/previews/8193807.jpg)
Ikea RIBBA Led Frame by DasUbrot
by Thingiverse
Last crawled date: 3 years, 5 months ago
It started as a wedding present, but quickly got out of hand so that it would be a shame not to share it.
Attention: You need a minimum buildplate of at least 235x235mm.
Parts
a 18650 Cell
Tp4056 Micro USB 5V 1A Charger Module
a LED-Stripe
two M3 Brass Inserts
some Wires
Superglue
First of all: You need to disassemble the LED Stripe Battery Pack.
It delivers the Switch and the Stripe for this Project.
After Printing the Base, Insert two brass M3 fittings on the side of it.
Scrape the battery poles free and solder two wires to the corresponding BAT+ and BAT- contacts of the TP4056.
Be careful not to unnecessarily heat the battery.
Then solder a new wire from OUT- to the negative pole of the LED strip. Between the positives and OUT+ you solder the switch.
Be patient as you thread the wire to the switch, it's pretty tight.
That’s it. Now glue the led strip in the edge of the frame. I don't particularly trust the adhesive strip, so I use a few drops of superglue on the corners. At the end, cut off the excess strip.
If not already done, put the battery in the gaps, lay the cables and clamp the charging module in the base as shown in the pictures. If the charging module or the Battery wobbles, glue it in place with a little hot glue. Finally screw the Frame to the Base by 2 short M3 Screws.
The rest is simple, put on the back cover, put on your most beautiful cat picture in and close the picture frame with the metal clips on the side.
Attention: You need a minimum buildplate of at least 235x235mm.
Parts
a 18650 Cell
Tp4056 Micro USB 5V 1A Charger Module
a LED-Stripe
two M3 Brass Inserts
some Wires
Superglue
First of all: You need to disassemble the LED Stripe Battery Pack.
It delivers the Switch and the Stripe for this Project.
After Printing the Base, Insert two brass M3 fittings on the side of it.
Scrape the battery poles free and solder two wires to the corresponding BAT+ and BAT- contacts of the TP4056.
Be careful not to unnecessarily heat the battery.
Then solder a new wire from OUT- to the negative pole of the LED strip. Between the positives and OUT+ you solder the switch.
Be patient as you thread the wire to the switch, it's pretty tight.
That’s it. Now glue the led strip in the edge of the frame. I don't particularly trust the adhesive strip, so I use a few drops of superglue on the corners. At the end, cut off the excess strip.
If not already done, put the battery in the gaps, lay the cables and clamp the charging module in the base as shown in the pictures. If the charging module or the Battery wobbles, glue it in place with a little hot glue. Finally screw the Frame to the Base by 2 short M3 Screws.
The rest is simple, put on the back cover, put on your most beautiful cat picture in and close the picture frame with the metal clips on the side.
Similar models
thingiverse
free
![Xbox 360 controller 18650 lithium battery case by m0st1ted](/t/8292986.jpg)
Xbox 360 controller 18650 lithium battery case by m0st1ted
...the console is powered off so you need to remove the battery afterwards. also the vibration is not working on these older models.
thingiverse
free
![Portable Ambient Light LED Powerbank by vmi](/t/8578051.jpg)
Portable Ambient Light LED Powerbank by vmi
...te controller 5v
single 18650 diy powerbank
18650 li-ion battery
22mm switch
wire
soldering iron
glue
heat shrink tube
multimeter
thingiverse
free
![SJCam SJ4000 battery charger by paulkennett](/t/8282248.jpg)
SJCam SJ4000 battery charger by paulkennett
...sign - and it works beautifully.
oh - and the reason i don't just charge the sj cam via its usb cable it i busted its socket.
thingiverse
free
![nb11-lh charger by robbott](/t/8554607.jpg)
nb11-lh charger by robbott
...en charging or when it's finished charging.
now i can charge my canon ixus battery on the road with a usb battery pack.
enjoy
thingiverse
free
![Pink Floyd Lithophane Lamp](/t/4833384.jpg)
Pink Floyd Lithophane Lamp
... printing the image a little larger (+ 1.0%) and then snapping it flush into the frame. alternatively, a drop of superglue helps.
thingiverse
free
![Tiny Whoop Charger by jasonlove199450](/t/8698178.jpg)
Tiny Whoop Charger by jasonlove199450
...e 2.0 jst ph connectors.
step 11: use hot glue cover to cover all solder joints.
step 12: use superglue to glue close the case :)
thingiverse
free
![Soldering Fume Extractor + LED Strip Mount by shreeyam](/t/8305578.jpg)
Soldering Fume Extractor + LED Strip Mount by shreeyam
...aded inserts (but not necessary - the 80mm fans are pressed in well enough), two switches, and a power jack (arduino style, 12v).
thingiverse
free
![Bicycle Tail Light by markoL1234](/t/9233910.jpg)
Bicycle Tail Light by markoL1234
...1,7 cm) -lithium battery (18650) -toggle switch mts-102 or similar (mounting hole:6mm) -led strip 5v - 5 leds (76mm...
thingiverse
free
![TP4056 1A 5V Lithium Battery 18650 Charging Board Module case by slibbinas](/t/8805218.jpg)
TP4056 1A 5V Lithium Battery 18650 Charging Board Module case by slibbinas
...ttery 18650 charging board module case.
printed in pla
both sides fits. you can use pair drops of superglue to keep them together
thingiverse
free
![LED lamp, credit card size by akosboda](/t/9693247.jpg)
LED lamp, credit card size by akosboda
...e is about 4 hours. the charge led shines through the case wall.
back is held by a wedge in position, notch at the usb plug side.
Ribba
turbosquid
$12
![RIBBA sconce IKEA](/t/13407051.jpg)
RIBBA sconce IKEA
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
![Декоративный набор](/t/786719.jpg)
Декоративный набор
...рамка , картина , настольный светильник рамки - graceful ribba frame modern frames зеркало - joanna wood starburst mirror...
thingiverse
free
![Ikea Ribba hook by nickfranciscos](/t/8800653.jpg)
Ikea Ribba hook by nickfranciscos
...ikea ribba hook by nickfranciscos
thingiverse
hook for wall mounting ikea ribba picture frame.
thingiverse
free
![coin slot for ribba ramen by Saarmaik](/t/8141950.jpg)
coin slot for ribba ramen by Saarmaik
...coin slot for ribba ramen by saarmaik
thingiverse
ein geldeinwurfschlitz für die ribba rahmen aus dem ikea
3d_sky
$8
![IKEA / RIBBA](/t/840978.jpg)
IKEA / RIBBA
...ibba
3dsky
http://www.ikea.com/ru/ru/catalog/products/00078032/
the archive has 6 additional textures with butterflies
thingiverse
free
![Ribba Adapter by JSN_FTW](/t/8183465.jpg)
Ribba Adapter by JSN_FTW
...a very sturdy and long nail.
this adapter moves the mounting closer to the wall, which makes hanging this frame much much easier.
thingiverse
free
![Hanger for IKEA RIBBA frames by neuttrino](/t/8070434.jpg)
Hanger for IKEA RIBBA frames by neuttrino
...hanger for ikea ribba frames by neuttrino
thingiverse
.
thingiverse
free
![IKEA RIBBA Hook v2 by Stigern](/t/8895951.jpg)
IKEA RIBBA Hook v2 by Stigern
...k for hanging stuff from your ribba picture ledges from ikea.
no screws, glue. just hook it on.
edit: added a v2 and a wide type.
thingiverse
free
![Ikea Ribba Frame Holder by josocjo](/t/8311775.jpg)
Ikea Ribba Frame Holder by josocjo
...it in 0,2mm layer height and 10% infill density.
it was designed with freecad.
if you need some informations write to me.
regards
thingiverse
free
![IKEA RIBBA Frame Hook by dricksanchez](/t/8569835.jpg)
IKEA RIBBA Frame Hook by dricksanchez
... the hanger is really deep inside. this simple hook for ikea's photo frame ribba. 0.1mm quality, 1mm walls, 30% infill. raft.
Ikea
3ddd
$1
![IKEA](/t/960247.jpg)
IKEA
...ikea
3ddd
ikea , стеллаж
ikea
3ddd
$1
![IKEA](/t/916945.jpg)
IKEA
...ikea
3ddd
ikea
кухня ikea
3ddd
$1
![IKEA](/t/864815.jpg)
IKEA
...ikea
3ddd
ikea
осторожно, тяжелая модель
ikea
3ddd
$1
![IKEA](/t/973892.jpg)
IKEA
...ikea
3ddd
ikea
5 зеркал от ikea
3ddd
$1
![IKEA](/t/866181.jpg)
IKEA
...ikea
3ddd
ikea , бойа
ikea светильник потолочный
3ddd
$1
![IKEA](/t/866510.jpg)
IKEA
...ikea
3ddd
ikea , барный
bar stool ikea
3ddd
$1
![IKEA](/t/693218.jpg)
IKEA
...ikea
3ddd
ikea , зубная щетка , косметика
ikea
3ddd
free
![IKEA](/t/814250.jpg)
IKEA
...ikea
3ddd
ikea , трюмо
дамский столик ikea.
3ddd
$1
![IKEA](/t/1000378.jpg)
IKEA
...3ddd
ps , декоративный набор , ikea
ikea decor
3ddd
$1
![Ikea](/t/866217.jpg)
Ikea
...ikea
3ddd
ikea , lagra
модель лампы от ikea
Led
3d_export
$5
![led](/t/11425881.jpg)
led
...led
3dexport
the led is cut with all the parts.
3ddd
$1
![Monacor / PARL56DMX / LED-320RGBW / LED-345RGBW / LED-300RGB](/t/612514.jpg)
Monacor / PARL56DMX / LED-320RGBW / LED-345RGBW / LED-300RGB
... прожектор
http://www.monacor.dk/
parl56dmx
led-320rgbw
led-345rgbw
led-300rgb
turbosquid
$10
![LED](/t/13317501.jpg)
LED
...led
turbosquid
free 3d model led for download as blend on turbosquid: 3d models for games, architecture, videos. (1691856)
3d_export
$5
![led lamp](/t/11423129.jpg)
led lamp
...led lamp
3dexport
led lamp, brightness animation
3ddd
free
![leds-c4](/t/815641.jpg)
leds-c4
...leds-c4
3ddd
leds-c4
современный торшер
3ddd
free
![leds-c4](/t/837451.jpg)
leds-c4
...leds-c4
3ddd
leds-c4
настольный лампа
turbosquid
$19
![LED](/t/13371517.jpg)
LED
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
![Led](/t/13237358.jpg)
Led
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![LED](/t/13259706.jpg)
LED
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
![LED](/t/13391561.jpg)
LED
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Frame
archibase_planet
free
![Frame](/t/951023.jpg)
Frame
...frame
archibase planet
frame photo frame
frame n190813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Frame](/t/951025.jpg)
Frame
...frame
archibase planet
frame photo frame
frame n071113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
$1
![Frame](/t/836722.jpg)
Frame
...frame
3ddd
frame
3ddd
free
![Frame](/t/795165.jpg)
Frame
...frame
3ddd
frame
archibase_planet
free
![Frame](/t/951019.jpg)
Frame
...frame
archibase planet
frame mirror frame ornament
frame n260113 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Frame](/t/951022.jpg)
Frame
...frame
archibase planet
frame photo frame
frame photo n190813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Frame](/t/951035.jpg)
Frame
...frame
archibase planet
frame window window frame
frame 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Frame](/t/951036.jpg)
Frame
...frame
archibase planet
frame window frame window
frame 3 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Frame](/t/951038.jpg)
Frame
...frame
archibase planet
frame wall frame decoration
frame 1 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
![Frame](/t/951039.jpg)
Frame
...frame
archibase planet
frame window window frame
frame 2 - 3d model (*.gsm+*.3ds) for interior 3d visualization.