Thingiverse
IKEA Millberget Seat Wedge by MrButtercup
by Thingiverse
Last crawled date: 4 years, 8 months ago
Wedge to put between seat and post on the IKEA Millberget swivel chair.
The 2020 model of the IKEA Millberget chair has a different angle than previous versions - it kinda feels like you're sitting forward in a downhill.
So I made this wedge thing to fix it.
It's my first ever design, but it works.
You will need to get two longer bolts for the front. (M8x40).
The two in the rear can still be original.
For smaller printer beds, it could be best to print it standing up with the thicker part in the bottom.
The 2020 model of the IKEA Millberget chair has a different angle than previous versions - it kinda feels like you're sitting forward in a downhill.
So I made this wedge thing to fix it.
It's my first ever design, but it works.
You will need to get two longer bolts for the front. (M8x40).
The two in the rear can still be original.
For smaller printer beds, it could be best to print it standing up with the thicker part in the bottom.