Ikea Lack Printer Enclosure - Magnetless Remix All-in-One by kurisun

Last crawled date: 3 years, 1 month ago

This is a remix as I was having issues with gluing the plexiglass holders on the original model and I wanted a cleaner all-in-one look.
Original project can be found here: https://www.thingiverse.com/thing:2226678
This model is specifically designed for 2.5mm plexiglass 500x500 panels.
There are 5 models included:
Universal Lack Leg.stl is the classic leg with holders on each side.
Front Left Lack Leg.stl and Front Right Lack Leg.stl are remixed versions that remove the clip but leave the overhang so you can combine these with a mod that allows for a plexiglass door.
Update 12/30/2017
I added 3 more models, Front Left/Right Lack Leg with Clip Holders are modified front Legs that allow for a clip at the bottom (Bottom Front Clip). This is so I can use a Plexiglass door and still clip it shut during operation. I have made these hollow as I wanted to save on materials during the reprint and I saw someone else suggest it in the main comment thread. The clip is supposed to be a tight fit, so may require scaling if it doesn't slide properly. Please refer to the print settings section below for updated printing information for these parts.
The Lack Top Bracket and Clips are included for completion, but have not been remixed.
Update 1/21/2018:
Added Hollow versions of the original legs to save on material.
For the Cabinet:
The handle for the Plexiglass comes from here: https://www.thingiverse.com/thing:2459045
The stackers I used to put an additional Lack table underneath this setup come from here: https://www.thingiverse.com/thing:2476441
I have added the remixed Plexiglass arm, base, and back piece that I used specifically for this build. These originally came from here: https://www.thingiverse.com/thing:1831572