Thingiverse
Ikea Lack End Table Logitech C270 Webcam Mount by JISpal01
by Thingiverse
Last crawled date: 3 years, 5 months ago
This is a little bracket to hold your Logitech C270 webcam.
It clips on fairly securely with no hardware, but has accommodations for 3mm screws to tighten it down.
The camera fits in fairly snug without hardware, but it has an accommodation for a 3mm screw.
I printed it in PETG. I regret that. I will reprint in PLA as PETG tends to creep over time and loosen its grip.
It doesn't hold the camera up high enough to see the build platform if attached to the platform your printer is sitting on. It only works hanging from above.
I recommend a Logitech C270 focus adjuster mod, as it was too close to my bed for the preset focus. The adjuster mods are easy to print and easy to install on the C270 - no cutting or anything like that. Highly recommended mod to go with this part.
Prints without supports if you lay it flat on its back.
It clips on fairly securely with no hardware, but has accommodations for 3mm screws to tighten it down.
The camera fits in fairly snug without hardware, but it has an accommodation for a 3mm screw.
I printed it in PETG. I regret that. I will reprint in PLA as PETG tends to creep over time and loosen its grip.
It doesn't hold the camera up high enough to see the build platform if attached to the platform your printer is sitting on. It only works hanging from above.
I recommend a Logitech C270 focus adjuster mod, as it was too close to my bed for the preset focus. The adjuster mods are easy to print and easy to install on the C270 - no cutting or anything like that. Highly recommended mod to go with this part.
Prints without supports if you lay it flat on its back.
Similar models
thingiverse
free
Logitech C270 Adjustable Focus Mod by TRIDOS
...djustable focus mod by tridos
thingiverse
this allows you to change the focus of the lens of your c270 without disassembling it.
thingiverse
free
Anet A6 Logitech C270 Camera Holder by maciekish
...a in the holder, move your x axis to the middle and turn the focus ring until the nozzle is in focus, then reassemble the camera.
thingiverse
free
camera clip by TickTock
...progress. clips onto the sheet metal housing of a solidoodle4. had to open the webcam to adjust the focus for the part closeup.
thingiverse
free
Logitech c270 webcam manual focus adjust ring. Thin & minimalistic. by Night_Gryphon
...ng.
the part spacings was adjusted for my 3d printer. you can adjust them in attached freecad source.
freecad source is attached.
thingiverse
free
Logitech C270 Webcam Focus Ring with Screw Access by nlnpereira
...screwed back in, even if the focus ring and the face plate have already been snapped together (which makes it easier to install).
thingiverse
free
Logitech C270 Tripod Camera Mount by Jet_Prints
...designed for the logitech c270 webcam. the mount makes it easy to record your print or easily set up a camera for live-streaming!
thingiverse
free
Logitech C270 Camera Stand by halfluck
...logitech c270 camera stand by halfluck
thingiverse
nice stand for your logitech c270 camera
uses 2 3mm screws and nuts.
grabcad
free
FTC 16606 - Logitech c270 Webcam Mount
...he camera is set in the base, screw on the attachment to hold it in place.
recommended to print with an infill greater then 75%.
thingiverse
free
sparkcube logitech camera mount by stefanki
... won't work very well.
(see google about changing the focus - unfortunately you have to disassemble the camera for adjusting)
thingiverse
free
Prusa i3 MK3/MK3S camera mount for Logitech C270
...the logitech c270 needed:
the original base must be removed
maybe you have to adjust the focus of the lens by opening the housing
Jispal01
thingiverse
free
Ice Box Case for Raspberry Pi 3 with Ice Tower Cooler
...other parts (and optional feet) should be picked from jispal01#39;s original...
thingiverse
free
Raspberry Pi Zero W Digitial Stand-In by JISpal01
...ke always, the download contains step files of both models if anybody wants to change or add anything about the model, feel free.
thingiverse
free
Plastic Baggie Drying Rack - Made With Bamboo Skewers by JISpal01
...'s the first step to growing mushrooms). i just decided that 50 grams of pla was a better solution to give it some stability.
thingiverse
free
Odroid H2+ Case by JISpal01
...ith the gpio pins - to leave the gpio side unscrewed. or maybe the sata side if you plan to frequent swap drives for some reason.
thingiverse
free
Raspberry Pi 3 Digital Stand-in by JISpal01
... - going from my design software to slic3r to my tevo tarantula. i'm completely new to most of this. so beware and be gentle.
thingiverse
free
Tarantula Bed Support V2 Base for dual MGN12H blocks on one rail by JISpal01
...m robflip's original package here
https://www.thingiverse.com/thing:2832758
if you try this, please let me know how it works!
thingiverse
free
IKEA Lock Tool Bottle Holder (uses CVS Pharmacy pill bottles) by JISpal01
...els on one side, as long as your printer can accomplish a vertical round hole without supports - as seen in the third photograph.
thingiverse
free
Raspberry Pi Low Profile Ice Tower Cooler 40x20 Fan Mounting Brackets by JISpal01
...u're home and have the parts laying around.
i printed them in pla. infill is irrelevant because there's not much to them.
thingiverse
free
Heavy Dragon from X3 Terran Conflict by JISpal01
...o, there's no turret or gun details as those are different models in the game and i have no idea what i'm actually doing.
C270
turbosquid
$25
Webcam Logitech C270
... model webcam logitech c270 for download as 3ds, obj, and 3dm on turbosquid: 3d models for games, architecture, videos. (1319945)
thingiverse
free
C270 Holder for CRX
...c270 holder for crx
thingiverse
c270 holder crx...
thingiverse
free
C270 beugel by EBTronics
...c270 beugel by ebtronics
thingiverse
corner bracket for c270 webcam in lack enclosure
thingiverse
free
Mini C270 by Sp0nge
...mini c270 by sp0nge
thingiverse
mini logitech c270 case
open and closed.
thingiverse
free
C270 logitech by CerveauChat
...c270 logitech by cerveauchat
thingiverse
support 2020 pour caméra c270 et c170
thingiverse
free
C270 Support
...70 support
thingiverse
c270 support for a 30mm top table. rotating base due to a screw.
materials:
1x m3x12
4x m3x25
3x m3 nuts
thingiverse
free
BW-Bracket-C270 by dmelle
...bw-bracket-c270 by dmelle
thingiverse
bw-bracket-c270
thingiverse
free
C270 FishEye Optic by NedalLive
...c270 fisheye optic by nedallive
thingiverse
stand for fisheye optique c270
thingiverse
free
C270 SMD LED mount
...c270 smd led mount
thingiverse
front mount of leds for logitech c270
thingiverse
free
C270 Logitech Holder by nicoflood
...c270 logitech holder by nicoflood
thingiverse
logitech c270 webcam holder rmx
Webcam
3d_export
$10
webcam
...webcam
3dexport
this is a webcam
archibase_planet
free
Webcam
...planet
webcam web camera camera
webcam camera a4tech pks-730g web n200613 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$6
Webcam
...orted to 3ds, dae, obj and fbx there is the c4d file include with materials file this is a webcam microsoft lifecam vx-3000 model
turbosquid
$35
Webcam
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$35
webcam
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
webcam
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Webcam
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$2
Webcam
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Webcam
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Webcam
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Logitech
3ddd
$1
Logitech Z623
...logitech z623
3ddd
logitech , колонки
колонки logitech z623
3ddd
free
Logitech C500
...logitech c500
3ddd
logitech , вебкамера
logitech c500 webcam
3ddd
free
Клавиатура Logitech
...атура logitech
3ddd
logitech , клавиатура
беспроводная клавиатура logitech с подсветкой.
3ddd
$1
logitech revolution
... revolution , мышь
mental ray, logitech revolution
3ddd
$1
Logitech LS21
...logitech ls21
3ddd
logitech , колонки
гламуррррненько =)
3ddd
$1
колонки Logitech z906
...колонки logitech z906
3ddd
logitech
logitech z906
3ddd
$1
Logitech x-530
... акустика , колонки
колонки logitech x-530
текстуры присутствуют
turbosquid
$5
Logitech Speakers
...uid
royalty free 3d model logitech speakers for download as on turbosquid: 3d models for games, architecture, videos. (1712072)
turbosquid
free
Logitech Speaker
...urbosquid
free 3d model logitech speaker for download as fbx on turbosquid: 3d models for games, architecture, videos. (1552574)
3ddd
$1
Трекбол Logitech M570
... logitech
модель популярного трекбола logitech m570. материалы corona, turbosmooth на большинстве элементов не свернут.
Lack
3d_export
$5
LACK LACK Coffee table white 90x55 cm IKEA
..., white, 90x55 cm ikea<br>https://www.ikea.com/ru/ru/p/lack-lakk-zhurnalnyy-stol-belyy-50449907/?ysclid=l8zshj49w6656165430
turbosquid
$4
Ikea Lack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
IKEA Lack Coffee Table
... кофейный
ikea lack coffee tablehttp://www.ikea.com/gb/en/catalog/products/00104291
turbosquid
$5
IKEA Lack Table
...ack table for download as blend, blend, unitypackage, and fbx on turbosquid: 3d models for games, architecture, videos. (1623135)
turbosquid
$10
Ikea Lack Set
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
IKEA Lack Library
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
IKEA LACK TABLE
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
IKEA Lack Shelf
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$9
Ikea Table 5 Lack
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
IKEA Lack Side Table
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , стеллаж
ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
кухня ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
осторожно, тяжелая модель
ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea
5 зеркал от ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , бойа
ikea светильник потолочный
3ddd
$1
IKEA
...ikea
3ddd
ikea , барный
bar stool ikea
3ddd
$1
IKEA
...ikea
3ddd
ikea , зубная щетка , косметика
ikea
3ddd
free
IKEA
...ikea
3ddd
ikea , трюмо
дамский столик ikea.
3ddd
$1
IKEA
...3ddd
ps , декоративный набор , ikea
ikea decor
3ddd
$1
Ikea
...ikea
3ddd
ikea , lagra
модель лампы от ikea
End
archibase_planet
free
Cigarettes end
...d
archibase planet
cigarettes end cigarette stub cigar-butt
cigarette-end - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
end table
...end table
3dexport
end table 3d model dimensions：(w)60cm×(d)60cm×(h)56cm
3d_export
$5
end table
...end table
3dexport
end table 3d model dimensions：(w)60cm×(d)60cm×(h)56cm
turbosquid
$10
End Table
...rbosquid
royalty free 3d model end table for download as max on turbosquid: 3d models for games, architecture, videos. (1570610)
turbosquid
$5
End Table
...urbosquid
royalty free 3d model end table for download as ma on turbosquid: 3d models for games, architecture, videos. (1622809)
turbosquid
$3
End Table
...rbosquid
royalty free 3d model end table for download as fbx on turbosquid: 3d models for games, architecture, videos. (1315115)
3d_export
$5
rope end ring
...rope end ring
3dexport
rope end ring
turbosquid
$2
End Tables
...
royalty free 3d model end tables for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1706896)
turbosquid
$14
End Table
...lty free 3d model end table for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1403051)
turbosquid
$12
End Table
...lty free 3d model end table for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1574707)
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)
Table
3ddd
free
Table
...table
3ddd
table
table
archibase_planet
free
Table
...table
archibase planet
table glass-table round table glass table
table n240311 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Table
...e
archibase planet
table dining-room table dinner table round table
table - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
table
...table
3dexport
table classic-table
archibase_planet
free
Table
...se planet
table glass table round table glass-table
table tonin habitat n280111 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Table
...table
archibase planet
table dining-room table dinner table
table - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Table
...table
archibase planet
table coffee table glass table
table - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Table
...table
archibase planet
table glass-table coffee table
table - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Table
...table
archibase planet
table writing table office table
table - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_ocean
$5
Table
...table
3docean
dining table furniture home kitchen table
simple wooden table.