Thingiverse
IKEA Franklin Stool Replacement Foot by sirhcel
by Thingiverse
Last crawled date: 4 years, 4 months ago
This is a replacement foot for IKEA Franklin stools. The higher version of this bar stool has different floor to leg angles at the front and rear legs, so an already available design (https://www.thingiverse.com/thing:3591907) did not work.
This part can be printed in place and uses a 16 mm M3 screw (DIN 965) and nut (DIN 934) to reinforce the neck to the ball joint. The nut gets inserted while printing.
BEWARE: This design has been tested with 150 kg static load on the stool which might be easily exceeded by dynamic loads.
This part can be printed in place and uses a 16 mm M3 screw (DIN 965) and nut (DIN 934) to reinforce the neck to the ball joint. The nut gets inserted while printing.
BEWARE: This design has been tested with 150 kg static load on the stool which might be easily exceeded by dynamic loads.