Igaro D2 Case

Last crawled date: 4 years, 2 months ago

Igaro D2 case
This case has been designed to make the Igaro D2 as weatherproof as possible. The D2 unit itself is not waterproof. I've designed the case so that the D2 is 'locked' into it and will not rattle around inside.
The lid and the base push together in a very snug fit. Is this to keep the weather out, so it can take a bit of effort to pull them apart again. The USB-C to USB adapter is the sacrificial component which is exposed to the elements. It is much cheaper to replace is, if needed, than to replace the D2. There is a link below to the adapter I've designed the case around.
The D2 can be inside the case and siliconed closed with the power lead and the USB-C adapter inserted later through the lid. Again, this is a snug fit to make it as weatherproof as possible. A small amount of silicone can be applied around the power lead and the USB-C adapter to make it more weatherproof.
Note: Make sure that the heatshrink on the power lead is not too far down on the connector as it will stop the connector from going through the lid.
3 Models - 18-20 grams
The lid fits all 3 models.
Igaro Base: For bag enclosure or it can be attached to the frame with adhesive velcro.
Igaro Base V1: For zip tying to 30-40mm tubing
Igaro Base V2: For zip tying to 20-25mm tubing
USB C to USB A 3.0 Adapter link:https://www.ebay.com.au/itm/USB-C-to-USB-A-3-0-Adapter-Convert-Connector-Aluminum-For-Macbook-iPad-Pro-2018/273818127959?hash=item3fc0d50e57:m:mYfFIxLK0VxIN0wdDMFmgKg