Thingiverse
Idle Hands Fidget Spinner by The_Sage
by Thingiverse
Last crawled date: 4 years, 1 month ago
The Idle Hands fidget spinner - Patterned after the pagan symbol for love and fertility. Show it to all your friends. Confirm what your conservative friends already suspected, that fidget spinners are indeed evil.
Printed at 0.2mm layer height. No special settings, but I did find that the caps print best with the bearing spindle down, and supports on. This is due to the small concave surface on the face of both caps that doesn't print well if face down. Bearing is a tight fit but it will go. The bearing cut-out is at exactly 22mm.
To complete this fidget you'll need (5) m4 nuts (because that's what I had available) and a 608 bearing. Enjoy, and be sure to ROCK ON!
Printed at 0.2mm layer height. No special settings, but I did find that the caps print best with the bearing spindle down, and supports on. This is due to the small concave surface on the face of both caps that doesn't print well if face down. Bearing is a tight fit but it will go. The bearing cut-out is at exactly 22mm.
To complete this fidget you'll need (5) m4 nuts (because that's what I had available) and a 608 bearing. Enjoy, and be sure to ROCK ON!