Thingiverse
![i3 X-Ends for LM8LUU and 8mm Anti-Backlash Nut by GiulianoM](/previews/8893143.jpg)
i3 X-Ends for LM8LUU and 8mm Anti-Backlash Nut by GiulianoM
by Thingiverse
Last crawled date: 3 years, 1 month ago
I got a pair of TR8*4 leadscrews from RobotDigg, as well as the anti-backlash nut that require substantial changes to the X-ends on my Prusa i3.. so I'm designing my own.
Linear Stepper Nema17 w/ 300mm Tr8*4 Leadscrewhttp://www.robotdigg.com/product/557
Anti-backlash Nut for Tr8*4 Lead Screwhttp://www.robotdigg.com/product/344
I designed the X-ends to hold a captive LM8LUU bearing (8x15x45mm), retained by M3 screws at the top and bottom.
Since the diameter of the anti-backlash nut is rather large, this required that I space out the distance between the smooth rod and the threaded rod to 26 mm (vs 20).
I will also be designing altered motor mounts for the Z axis to take this into consideration.
work in progress
Update 1: Printed out X motor end, it fits the bearing and 8mm nut well - but I had to revise the motor part to be a bit thicker. Also made the belt pathway wider, to 10mm, so it can handle a 9mm-wide belt.
Linear Stepper Nema17 w/ 300mm Tr8*4 Leadscrewhttp://www.robotdigg.com/product/557
Anti-backlash Nut for Tr8*4 Lead Screwhttp://www.robotdigg.com/product/344
I designed the X-ends to hold a captive LM8LUU bearing (8x15x45mm), retained by M3 screws at the top and bottom.
Since the diameter of the anti-backlash nut is rather large, this required that I space out the distance between the smooth rod and the threaded rod to 26 mm (vs 20).
I will also be designing altered motor mounts for the Z axis to take this into consideration.
work in progress
Update 1: Printed out X motor end, it fits the bearing and 8mm nut well - but I had to revise the motor part to be a bit thicker. Also made the belt pathway wider, to 10mm, so it can handle a 9mm-wide belt.
Similar models
thingiverse
free
![i3 Z-Ends for LM8LUU and 8mm Anti-Backlash Nut by GiulianoM](/t/8892652.jpg)
i3 Z-Ends for LM8LUU and 8mm Anti-Backlash Nut by GiulianoM
...44
these are the z-end parts that correspond with the x-ends i designed:http://www.thingiverse.com/thing:1060956
work in progress
thingiverse
free
![Prusa i3 X-Ends for Z Acme Leadscrew by ffleurey](/t/8996262.jpg)
Prusa i3 X-Ends for Z Acme Leadscrew by ffleurey
...-rod,-350mm-length-tr8*8-acme-leadscrew
the upgraded belt tensioner can be found here: http://www.thingiverse.com/thing:160636.
thingiverse
free
![DIY Prusa i3 x-end-idler and -motor for anit-backlash T8 brass nut by flying_chaos](/t/8623414.jpg)
DIY Prusa i3 x-end-idler and -motor for anit-backlash T8 brass nut by flying_chaos
...er distance of 17mm between z-rods & z-screw.
this worked perfectly for me with zero slop. hope this works well for you too!
grabcad
free
![TR8 Anti-Backlash 8mm Lead Screw Trapezoidal](/t/1654580.jpg)
TR8 Anti-Backlash 8mm Lead Screw Trapezoidal
...acklash 8mm lead screw trapezoidal
grabcad
tr8 - 8mm lead screw trapezoidal acme w/ anti-backlash nut cnc 3d printer spare parts
thingiverse
free
![X Idler with Z Anti-backlash Spring and Belt Tensioner by 7effrey](/t/8259203.jpg)
X Idler with Z Anti-backlash Spring and Belt Tensioner by 7effrey
...commend the alternative version for longer rods if they are 370 mm - my rods fits perfectly well with the old prusa mk2 x-idler.
thingiverse
free
![Prusa i3 improved X ends for brass TR8 / T8 nuts (anti-backlash nuts supported) by Pwuts](/t/8625190.jpg)
Prusa i3 improved X ends for brass TR8 / T8 nuts (anti-backlash nuts supported) by Pwuts
...s can sell nuts which look the same but have small differences in the distance between the screw holes and the size of the holes.
thingiverse
free
![BearExxa for TR8 with Anti Backlash by Minims](/t/8200106.jpg)
BearExxa for TR8 with Anti Backlash by Minims
...h by minims
thingiverse
bear extruder motor and idler part for chinese tr8 anti backlash.
model is for mk3s
1st version to test.
grabcad
free
![TR8 Anti-Backlash Nut for Trapezoidal threaded spindle](/t/8331821.jpg)
TR8 Anti-Backlash Nut for Trapezoidal threaded spindle
...tr8 anti-backlash nut for trapezoidal threaded spindle
grabcad
tr8 anti-backlash nut for trapezoidal threaded spindle
thingiverse
free
![Anti backlash Nut adapter Ender 3/Other TR8 based printers No Z Height loss by Its_3d_Willy](/t/8184701.jpg)
Anti backlash Nut adapter Ender 3/Other TR8 based printers No Z Height loss by Its_3d_Willy
...0mm/60 tooth pulleys, any size will work
1x timing belt (from 696mm to ~800mm, i use 752mm)
m3 mounting hardware and t slot nuts.
thingiverse
free
![anti backlash adjustable prusa i3 x motor mount by the_nerdling](/t/8891307.jpg)
anti backlash adjustable prusa i3 x motor mount by the_nerdling
...p using two nuts and a springi havent tested it, the hole might not be deep enough
i modified it and now the hole is an inch deep
Giulianom
thingiverse
free
![Lumia 640 Mount by GiulianoM](/t/8914474.jpg)
Lumia 640 Mount by GiulianoM
...l shrink to the correct size. abs will also more likely resist high temperatures in a car, so i wouldn't recommend using pla.
thingiverse
free
![Dust Collector Blower to 6" Duct by GiulianoM](/t/8004246.jpg)
Dust Collector Blower to 6" Duct by GiulianoM
...l fit in sdr pipes of slightly varying diameters.
used for venting the blower outside or otherwise into some other 6" input.
thingiverse
free
![4" x 6" Oval Hole Template by GiulianoM](/t/8035504.jpg)
4" x 6" Oval Hole Template by GiulianoM
... 7", and the distance between the two walls is 6.04".
clamp it down over a 6" board and the oval will be centered.
thingiverse
free
![MicroSwiss Ender 5 Plus Direct Drive Plate by GiulianoM](/t/8207169.jpg)
MicroSwiss Ender 5 Plus Direct Drive Plate by GiulianoM
...ve-extruder-for-creality-ender-5
i am using the stl to design a cooling shroud since there are extra mounting holes on the plate.
thingiverse
free
![Dial Indicator Mount for MGN12H Linear Block by GiulianoM](/t/8185585.jpg)
Dial Indicator Mount for MGN12H Linear Block by GiulianoM
...m3 10mm screws for mounting the adapter block to the mgn12h carriage.
1 x m3 screw, 10-15mm long for securing the dial indicator.
thingiverse
free
![Arducam 5MP OV5647 Camera Mount by GiulianoM](/t/8196129.jpg)
Arducam 5MP OV5647 Camera Mount by GiulianoM
...e should come with the camera kit.
if not, you'll need 4 x m2 15mm screws and 4 x m2 nuts.
m2 - 2mm screws, not m2.5 - 2.5mm.
thingiverse
free
![LM8LUU Bearing Blocks for Prusa Y-Axis by GiulianoM](/t/8893466.jpg)
LM8LUU Bearing Blocks for Prusa Y-Axis by GiulianoM
...the blocks to the y-carriage. 20mm are long enough if your plate is threaded - use 25-30mm with nuts if yours is drilled through.
thingiverse
free
![i3 Z-Ends for LM8LUU and 8mm Anti-Backlash Nut by GiulianoM](/t/8892652.jpg)
i3 Z-Ends for LM8LUU and 8mm Anti-Backlash Nut by GiulianoM
...44
these are the z-end parts that correspond with the x-ends i designed:http://www.thingiverse.com/thing:1060956
work in progress
thingiverse
free
![Mini Height Differential IR Sensor Board Mount for E3D v6 / Prusa i3 Rework by GiulianoM](/t/8895424.jpg)
Mini Height Differential IR Sensor Board Mount for E3D v6 / Prusa i3 Rework by GiulianoM
...t onto the bottom two m4 bolts for the "e3d v6 compact extruder for i3 rework":
http://www.thingiverse.com/thing:725082
thingiverse
free
![Dual Melzi Box for RepRapPro Tricolor Mendel by GiulianoM](/t/9027416.jpg)
Dual Melzi Box for RepRapPro Tricolor Mendel by GiulianoM
...clips on the top piece snapped off really easily, so i modified the top to make the clip walls a little thicker (2.0mm vs 1.5mm).
Lm8Luu
thingiverse
free
![X-Carriage for LM8LUU by Huang_yung](/t/8822871.jpg)
X-Carriage for LM8LUU by Huang_yung
...x-carriage for lm8luu by huang_yung
thingiverse
x-carriage for lm8luu
thingiverse
free
![lm8luu by ngandalf](/t/8587493.jpg)
lm8luu by ngandalf
...lm8luu by ngandalf
thingiverse
lm8uu for geetech prusa i3 pro b
thingiverse
free
![lm8luu printable bearing by laughingman](/t/8855611.jpg)
lm8luu printable bearing by laughingman
...lm8luu printable bearing by laughingman
thingiverse
// lm8luu
lm8uu_od = 15;
lm8uu_length = 45;
lm8uu_id = 8.1;
thingiverse
free
![Lm8luu casing by Toroddandre](/t/8534801.jpg)
Lm8luu casing by Toroddandre
...aring.
edit: new picture of lm8luu casing
i recommend using brim on this if printed standing up.. my first test got knocked of :)
thingiverse
free
![LM8LUU bearing clip by dspirov](/t/8782647.jpg)
LM8LUU bearing clip by dspirov
...or the lm8luu and made the back a little thinner.
see this page for standard bearing sizes: http://reprap.org/wiki/linear_bearing
thingiverse
free
![Prusa MK2 x carriage LM8LUU by stefanino](/t/8698216.jpg)
Prusa MK2 x carriage LM8LUU by stefanino
...prusa mk2 x carriage lm8luu by stefanino
thingiverse
prusa mk2 x carriage with lm8luu bearings
thingiverse
free
![LM8LUU by PulseNeko](/t/8640445.jpg)
LM8LUU by PulseNeko
... and you didnt want to play around with trying to get the right scaling percentage.
these are designed to work with m4 fasteners.
thingiverse
free
![LM8LUU Packer for super lube grease by PigeonPrint](/t/9687826.jpg)
LM8LUU Packer for super lube grease by PigeonPrint
...r super lube grease by pigeonprint
thingiverse
modified to fit the super lube grease threads a little better and fit the lm8luu.
thingiverse
free
![LM8UU LM8LUU linear bearings bed holder by CyfroN](/t/8145877.jpg)
LM8UU LM8LUU linear bearings bed holder by CyfroN
...lm8uu lm8luu linear bearings bed holder by cyfron
thingiverse
lm8uu lm8luu linear bearings bed holder
thingiverse
free
![LM8LUU Bearing Mount by walter](/t/8920181.jpg)
LM8LUU Bearing Mount by walter
...part. designed to fit the rigidbot z-axis bearings.
printer:
-- rigidbot
filaments:
-- colorfabb black pla/pha
*affiliate link
Backlash
3d_export
$32
![speed reducer gear box worm helical wpx](/t/11416324.jpg)
speed reducer gear box worm helical wpx
...small adjustments. gear-drives can be made to have no backlash by using split gears and spring tension but the...
thingiverse
free
![Backlash calibration by marams](/t/9067775.jpg)
Backlash calibration by marams
...backlash calibration by marams
thingiverse
this is a calibration piece to calculate the x,y backlash of your machine.
thingiverse
free
![Backlash spool holder by Gavitka](/t/8123178.jpg)
Backlash spool holder by Gavitka
...backlash spool holder by gavitka
thingiverse
backlashing spool holder to keep filament in tame. ticks.
thingiverse
free
![Anti-Backlash by 3DN4U](/t/8357104.jpg)
Anti-Backlash by 3DN4U
...anti-backlash by 3dn4u
thingiverse
m8
thingiverse
free
![Z anti-backlash by pstiv](/t/8247329.jpg)
Z anti-backlash by pstiv
...z anti-backlash by pstiv
thingiverse
z anti backlash adaptation for sharebot kiwi 3d/ arduino materia 101
thingiverse
free
![DagoTrapez Anti Backlash by zer0logik](/t/8744643.jpg)
DagoTrapez Anti Backlash by zer0logik
...gotrapez anti backlash by zer0logik
thingiverse
anti backlash pour adaptation des tiges trapézoïdales sur les imprimantes dagoma
thingiverse
free
![backlash for ender 3, v2 by guyknow](/t/8007884.jpg)
backlash for ender 3, v2 by guyknow
...backlash for ender 3, v2 by guyknow
thingiverse
this for anti- backlash with double nut systems
thingiverse
free
![Delta anti backlash bracket by cristiprefac](/t/8792442.jpg)
Delta anti backlash bracket by cristiprefac
...elta anti backlash bracket by cristiprefac
thingiverse
this is an anti-backlash bracket to be used with any delta style printer.
thingiverse
free
![Backlash Test by Ancientwolf](/t/8787772.jpg)
Backlash Test by Ancientwolf
...ck position: = adjust y backlash compensation.
gaps in 8 o'clock or 2 o'clock position: = adjust x backlash compensation.
thingiverse
free
![Tevo Tarantula anti-backlash mount](/t/4797124.jpg)
Tevo Tarantula anti-backlash mount
...le with factory brass nut.
the anti-backlash mount is from: https://www.thingiverse.com/thing:2607994/comments - thanks hrishib !
Anti
3d_export
$5
![Anti stress kit](/t/12006129.jpg)
Anti stress kit
...anti stress kit
3dexport
anti stress kit wall sign
turbosquid
$5
![Anti-aircraft](/t/13292543.jpg)
Anti-aircraft
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
![Anti stapler 3D Model](/t/126965.jpg)
Anti stapler 3D Model
...anti stapler 3d model
3dexport
staples anti stapler анти степлер
anti stapler 3d model seemoonlight 69602 3dexport
archive3d
free
![Anti-aircraft 3D Model](/t/1052480.jpg)
Anti-aircraft 3D Model
...litary equipment
anti-aircraft m730a1 n020711 - 3d model (*.3ds) for exterior 3d visualization.
3d_export
$5
![anti-vandal unit nofer](/t/11522000.jpg)
anti-vandal unit nofer
...anti-vandal unit nofer
3dexport
anti-vandal unit nofer
turbosquid
$30
![Anti-tank Obstacle](/t/13486149.jpg)
Anti-tank Obstacle
...
royalty free 3d model anti-tank obstacle for download as fbx on turbosquid: 3d models for games, architecture, videos. (1438196)
turbosquid
$3
![Anti gravity drone](/t/13291911.jpg)
Anti gravity drone
...
royalty free 3d model anti gravity drone for download as obj on turbosquid: 3d models for games, architecture, videos. (1311361)
turbosquid
$1
![Anti airplane Missile](/t/13281443.jpg)
Anti airplane Missile
...yalty free 3d model anti airplane missile for download as fbx on turbosquid: 3d models for games, architecture, videos. (1274540)
turbosquid
$1
![Anti-Terrorist Barrier](/t/13279578.jpg)
Anti-Terrorist Barrier
...e 3d model anti-terrorist barrier for download as jpg and obj on turbosquid: 3d models for games, architecture, videos. (1348463)
3d_ocean
$8
![Sunsilk Anti Dandruff](/t/368753.jpg)
Sunsilk Anti Dandruff
...i dandruff sunsilk bottle sunsilk pack sunsilk product sunsilk shampoo
sunsilk anti dandruff is sunsilk shampoo 3d model product.
8Mm
turbosquid
$50
![8MM CAMERA.max](/t/13232747.jpg)
8MM CAMERA.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
![kodak 8mm](/t/13321232.jpg)
kodak 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
![Brass Bush Bearing 8mm ID](/t/13290844.jpg)
Brass Bush Bearing 8mm ID
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
![wrench big collection from 8mm to 32mm](/t/13352821.jpg)
wrench big collection from 8mm to 32mm
...llection from 8mm to 32mm for download as obj, fbx, and sldas on turbosquid: 3d models for games, architecture, videos. (1438111)
turbosquid
$1
![Flexible Shaft Coupling 6mm x 8mm](/t/13290845.jpg)
Flexible Shaft Coupling 6mm x 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
![Flexible shaft coupling 5mm x 8mm](/t/13290846.jpg)
Flexible shaft coupling 5mm x 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
![German WWII Breda MG-8mm Ammo Box (Low Poly)](/t/13371528.jpg)
German WWII Breda MG-8mm Ammo Box (Low Poly)
...g-8mm ammo box (low poly) for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1395526)
3ddd
free
![Treasures of the Sea](/t/338273.jpg)
Treasures of the Sea
...treasures of the sea 3ddd бижутерия d=8mm ...
3d_export
$5
![double thread screw](/t/11460886.jpg)
double thread screw
...thread length: 10 mm total length: 41 mm diameter: 8mm ...
3d_export
$5
![large double thread screw](/t/11460885.jpg)
large double thread screw
...thread length: 10 mm total length: 115 mm diameter: 8mm ...
I3
3d_export
$10
![suv i3](/t/11417352.jpg)
suv i3
...suv i3
3dexport
suv i3 2013 series
3d_ocean
$89
![BMW i3 2012](/t/558837.jpg)
BMW i3 2012
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
cg_studio
$99
![BMW i3 20143d model](/t/676672.jpg)
BMW i3 20143d model
...
cgstudio
.3ds .c4d .fbx .lwo .max .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
![BMW i3 20123d model](/t/630782.jpg)
BMW i3 20123d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2012 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
![BMW i3 20143d model](/t/702833.jpg)
BMW i3 20143d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
humster3d
$75
![3D model of BMW i3 2014](/t/751463.jpg)
3D model of BMW i3 2014
...
buy a detailed 3d model of bmw i3 2014 in various file formats. all our 3d models were created maximally close to the original.
humster3d
$40
![3D model of Kitchen Set I3](/t/753517.jpg)
3D model of Kitchen Set I3
...uy a detailed 3d model of kitchen set i3 in various file formats. all our 3d models were created maximally close to the original.
3d_ocean
$30
![Kitchen set i3](/t/870.jpg)
Kitchen set i3
...ensils oven plates shelves sink table ware
kitchen set i3 include 3d models: cooker, oven, sink, cupboards, table, chair, plates.
3d_ocean
$89
![BMW i3 2014](/t/576990.jpg)
BMW i3 2014
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
cg_studio
$99
![BMW i3 Concept 20113d model](/t/848309.jpg)
BMW i3 Concept 20113d model
...i3
.3ds .c4d .fbx .lwo .max .obj - bmw i3 concept 2011 3d model, royalty free license available, instant download after purchase.
Nut
3d_export
free
![nut](/t/11496221.jpg)
nut
...nut
3dexport
low poly
turbosquid
$13
![Nut](/t/13492638.jpg)
Nut
...
royalty free 3d model nut for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1227126)
turbosquid
$12
![nut](/t/13418222.jpg)
nut
...
royalty free 3d model nut for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1175191)
3d_export
$5
![nut handle](/t/11920638.jpg)
nut handle
...nut handle
3dexport
nut handle
3d_export
$5
![nut anchor](/t/11920487.jpg)
nut anchor
...nut anchor
3dexport
nut anchor
3d_export
$5
![wing nut](/t/11920503.jpg)
wing nut
...wing nut
3dexport
wing nut
3d_export
$5
![butterfly nut](/t/11920504.jpg)
butterfly nut
...butterfly nut
3dexport
butterfly nut
3d_export
$5
![special nut](/t/11920522.jpg)
special nut
...special nut
3dexport
special nut
3d_export
$5
![nut hook](/t/11920424.jpg)
nut hook
...nut hook
3dexport
nut hook
3d_export
$5
![nut ring](/t/11920425.jpg)
nut ring
...nut ring
3dexport
nut ring
Ends
archibase_planet
free
![Cigarettes end](/t/950190.jpg)
Cigarettes end
...d
archibase planet
cigarettes end cigarette stub cigar-butt
cigarette-end - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
![end table](/t/11464312.jpg)
end table
...end table
3dexport
end table 3d model dimensions:(w)60cm×(d)60cm×(h)56cm
3d_export
$5
![end table](/t/11464157.jpg)
end table
...end table
3dexport
end table 3d model dimensions:(w)60cm×(d)60cm×(h)56cm
turbosquid
$10
![End Table](/t/13486976.jpg)
End Table
...rbosquid
royalty free 3d model end table for download as max on turbosquid: 3d models for games, architecture, videos. (1570610)
turbosquid
$5
![End Table](/t/13358889.jpg)
End Table
...urbosquid
royalty free 3d model end table for download as ma on turbosquid: 3d models for games, architecture, videos. (1622809)
turbosquid
$3
![End Table](/t/13397909.jpg)
End Table
...rbosquid
royalty free 3d model end table for download as fbx on turbosquid: 3d models for games, architecture, videos. (1315115)
3d_export
$5
![rope end ring](/t/11920432.jpg)
rope end ring
...rope end ring
3dexport
rope end ring
turbosquid
$2
![End Tables](/t/13246296.jpg)
End Tables
...
royalty free 3d model end tables for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1706896)
turbosquid
$14
![End Table](/t/13383892.jpg)
End Table
...lty free 3d model end table for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1403051)
turbosquid
$12
![End Table](/t/13488745.jpg)
End Table
...lty free 3d model end table for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1574707)