Thingiverse
HyperPixel Raspberry Pi NAS by Multimedia4Linux
by Thingiverse
Last crawled date: 4 years, 5 months ago
The HyperPixel Raspberry Pi NAS housing is based on the well-known construction of Advanced Camera Device. The HPN housing can be used with a HyperPixel 4.0 TouchDisplay, Raspberry Pi 3B / 3B + and an M.2 SSD converter from Renkforce. The Renkforce converter supports M.2 SATA SSDs up to 2TB.
You can also use the device with a PowerBank as mobile storage device or media player.
The housing has also proven itself as an Octoprint server.
You can find a parts list with a drawing in the download files.
The housing can be produced with an FDM printer or with the HP multifusion process.
HPN and ACD differ in the lack of an SD card reader and the tripod mount.
For more information see:https://www.multimedia4linux.de/index.php/13-advanced-camera-device/173-hyperpixel-4-0-casing
and
https://www.multimedia4linux.de/index.php/advanced-camera-device/8-dslr-wiki/168-advanced-camera-device-3
Release note:
X500-1000 Rev. 03 (2020-11-14)
As the threaded bushings are difficult to obtain, the housing was made compatible with the ACD Assembly Kit. In addition to the kit, only the 20mm spacers and the electronics are required.
The collision with the converter in the case of non-dimensionally accurate housings has been fixed
X500-1000 Rev. 04 (2020-12-03)
Alternativ mounting solution for the casing top part added (Part X500-1211)
You can also use the device with a PowerBank as mobile storage device or media player.
The housing has also proven itself as an Octoprint server.
You can find a parts list with a drawing in the download files.
The housing can be produced with an FDM printer or with the HP multifusion process.
HPN and ACD differ in the lack of an SD card reader and the tripod mount.
For more information see:https://www.multimedia4linux.de/index.php/13-advanced-camera-device/173-hyperpixel-4-0-casing
and
https://www.multimedia4linux.de/index.php/advanced-camera-device/8-dslr-wiki/168-advanced-camera-device-3
Release note:
X500-1000 Rev. 03 (2020-11-14)
As the threaded bushings are difficult to obtain, the housing was made compatible with the ACD Assembly Kit. In addition to the kit, only the 20mm spacers and the electronics are required.
The collision with the converter in the case of non-dimensionally accurate housings has been fixed
X500-1000 Rev. 04 (2020-12-03)
Alternativ mounting solution for the casing top part added (Part X500-1211)