HyperCube printable X bushing with integrated clamp by puzon

Last crawled date: 3 years ago

This is Parametric Bushing by Dennis Hofmann (https://www.thingiverse.com/thing:2202854) with integrated handles to direct attaching to X carriage. I also added optional gap inside bushing to lower friction.
Generally i always have problem with clamped igus style bushings because they are squeezed and deforming by clamps. Furthermore double standard length bushings are not aligned and wobbling a bit. This bushing solved theese problems.
ABS is not suitable because it sticking to rods. PETG is the best.
Before print adjust theese variables in scad!
inner_diameter_in_millimeter
extrusion_width_in_millimeter
number_of_perimeters
number_of_teeth
//Edit: added bushing with 10.25mm inner and 16mm outer diameter.