Thingiverse
HyperCube Evolution - TW HEVO Edition by otaku521
by Thingiverse
Last crawled date: 4 years, 2 months ago
This is the built that I used for my 2 builds of HEVO which are remixed from many sources.
It has everything from boards, gantries, brackets and everything for your conveniences.
it has mounts for both Direct and Bowden as well! (Mounts based on Nedalive X standard carriage)
X&Y Gantries: 10mm Rods - Using IGUS RJMP
10mm Rod: Carbon Solid Rods for X / Steel on Y
Z Gantry: 12mm Rods - Using IGUS RJMP (Also version with LM12UU)
12mm Rod: Steel
Direct Drive - it is currently designed for Bondtech - Just mirror it for Titan v6/Aero
BL Touch is available for v3 Direct Drive Mount or via Nedalive's rear BLtouch Mount
For Bowden - there is Nedalive's bowden mount - I used rear mount when I was on Bowden
There is a version of the bed Motor T8 brackets that can be used for DuetWifi Auto Bed Leveling for either 3 or 4 Lead Screws!
Wanted to thank Tech2C, Scott3D, Nedalive, Tunnelvision and many others to make this possible!
(If you see something that I can add the remix by, please tell me.. I forgot as there are so many of you that inspired and helped me! Thank you!)
Next version - beginning to study MGN Rails
Update: 2018/5/4 - updated HEVO - Extruder - Direct Drive (Bondtech) (Mirror Aero) v3.1 with BL Touch - Cleaned it up a lil and strength the part
Update: 2018/5/9 - updated HEVO - Beefed up Motor Plate (L+R Corners) v3 - it should work with regular bed setup with brackets
Update: 2018/5/10 - updated:
1) HEVO - Direct Drive - Generic Extruder - this direct drive should fit most 35mm and under motors (prefer 22mm pancake+10mm heat sink) - This should work for Titan+V6 / Titan Aero / Bondtech+V6
2) HEVO - E3D v6 with 5015 Radial Fan WITH BL TOUCH - updated V6 hot end with 5015 Radial Fan with BL Touch (add 2mm spacer on top of the mount and BL Touch - approx 8mm clearance)
(Left Hand and Right-Hand version - updated)
a) Made 2 version: 24mm Motor (Pancake) and 36mm Motor (can use Pancake+Heatsink)
Update 2018/5/11 - Updated the Fan mount and fan duct to be used with Volcano Hot End
Update: 2018/5/12 - Updated Fan duct for volcano short 5015 fan
Update: 2018/5/16 - Updated HEVO - Beefup Motor Plate v3 Mini for smaller builds (200mm)
Update 2018/5/20 - Updated the HEVO - Z Motor Mount - v3.1 Mini - for smaller builds (200mm) - can be used for all sizes
It has everything from boards, gantries, brackets and everything for your conveniences.
it has mounts for both Direct and Bowden as well! (Mounts based on Nedalive X standard carriage)
X&Y Gantries: 10mm Rods - Using IGUS RJMP
10mm Rod: Carbon Solid Rods for X / Steel on Y
Z Gantry: 12mm Rods - Using IGUS RJMP (Also version with LM12UU)
12mm Rod: Steel
Direct Drive - it is currently designed for Bondtech - Just mirror it for Titan v6/Aero
BL Touch is available for v3 Direct Drive Mount or via Nedalive's rear BLtouch Mount
For Bowden - there is Nedalive's bowden mount - I used rear mount when I was on Bowden
There is a version of the bed Motor T8 brackets that can be used for DuetWifi Auto Bed Leveling for either 3 or 4 Lead Screws!
Wanted to thank Tech2C, Scott3D, Nedalive, Tunnelvision and many others to make this possible!
(If you see something that I can add the remix by, please tell me.. I forgot as there are so many of you that inspired and helped me! Thank you!)
Next version - beginning to study MGN Rails
Update: 2018/5/4 - updated HEVO - Extruder - Direct Drive (Bondtech) (Mirror Aero) v3.1 with BL Touch - Cleaned it up a lil and strength the part
Update: 2018/5/9 - updated HEVO - Beefed up Motor Plate (L+R Corners) v3 - it should work with regular bed setup with brackets
Update: 2018/5/10 - updated:
1) HEVO - Direct Drive - Generic Extruder - this direct drive should fit most 35mm and under motors (prefer 22mm pancake+10mm heat sink) - This should work for Titan+V6 / Titan Aero / Bondtech+V6
2) HEVO - E3D v6 with 5015 Radial Fan WITH BL TOUCH - updated V6 hot end with 5015 Radial Fan with BL Touch (add 2mm spacer on top of the mount and BL Touch - approx 8mm clearance)
(Left Hand and Right-Hand version - updated)
a) Made 2 version: 24mm Motor (Pancake) and 36mm Motor (can use Pancake+Heatsink)
Update 2018/5/11 - Updated the Fan mount and fan duct to be used with Volcano Hot End
Update: 2018/5/12 - Updated Fan duct for volcano short 5015 fan
Update: 2018/5/16 - Updated HEVO - Beefup Motor Plate v3 Mini for smaller builds (200mm)
Update 2018/5/20 - Updated the HEVO - Z Motor Mount - v3.1 Mini - for smaller builds (200mm) - can be used for all sizes