Hypercube Evolution Reinforced Bed Mode by constantin33

Last crawled date: 2 years, 9 months ago

Original Hypercube Evolution bed design is good but has too much printed parts and the margin error gets bigger with time.
I made an alternative by using a different design.
BOM:
4 X LMK12LUU Square Flange Linear Bearings
Link: https://www.aliexpress.com/item/32815741633.html?spm=a2g0s.9042311.0.0.2742b90aQeBMJw
2 X Lead Screw POM nut
Link: https://www.aliexpress.com/item/32825317686.html?spm=a2g0s.9042311.0.0.2742b90aBBxDNt
DON'T USE THE BRASS ones.

18 X M5x10mm Screw (To fix the metal plates)


16 X M4x10mm Screw (To fix the Linear Bearings)


4 X M3x10mm Screw (To fix the Lead Screw POM nut)

2 X 2020 Aluminium Profile 415mm (The existing profiles can be used)

3 X 2020 Aluminium Profile 255mm (The existing profiles can be used)

7 X 2020 Corner Angle L Brackets Connectors.
LINK: https://www.aliexpress.com/item/4000767697780.html?spm=a2g0o.productlist.0.0.1bb15a5bsU7ybm&algo_pvid=f753b830-fd37-43d8-a6f9-8ffc62a8b72e&algo_exp_id=f753b830-fd37-43d8-a6f9-8ffc62a8b72e-8
4-7 X 2020 Corner Angle L Brackets Connectors, in order to fil the build plate.
Things to Print:

2X Z Axis Up Linear Rail Bracket Left


2X Z Axis Up Linear Rail Bracket Right


4X ​Z Axis Down Linear Rail Bracket 1-2


4X ​Z Axis Down Linear Rail Bracket 2-2

4-7X Z Build Plate Supports, must be combined with the 2020 Corner Angle L Brackets Connectors
Things to Cut:
2X Reenforced aluminium with 5mm thickness
Important:
One big modification was as well the linear guides supports, now you will gain some space on X-axis.
Added a new Z Axis Linear Rail Bracket as well, so be sure you will aligned them well. You can use the same rails as the original Hypercube Project