Thingiverse
HyperCube Evolution Igus Carriage Clamp tenser by endeffect
by Thingiverse
Last crawled date: 4 years, 8 months ago
A simple modification for HyperCube evolution to tense the force of the belt on the shafts instead of directly on the igus (or other linear bearing).
you'll need
4 M6 nut
4 m6 without head (10mm) screw
The tension can be ajusted with the screws on the shaft
you'll need
4 M6 nut
4 m6 without head (10mm) screw
The tension can be ajusted with the screws on the shaft