Thingiverse
Hypercube Evolution Bottom Enclosure V1 with 140mm Fan by constantin33
by Thingiverse
Last crawled date: 4 years, 2 months ago
I designed this simple Top enclosure because I had some trouble with the use of acrylic. This is the final design, fits very well for the 300X300X300mm dimension. If you guys will find some issue please contact me and I will solve it.
The V2 BOTTOM ENCLOSURE is available now: https://www.thingiverse.com/thing:3942786
VERY IMPORTANT: The Top case was made for 255MM Bed frame Y extrusion. For any change in the design contact me.
Printed with PLA at 190ºC and Bed at 45ºC.
Was spent about 520g.
To mount the cover you will need:
16X M5 10mm Bolts.
16X T-NUTS.
16X M3 10mm Bolts.
16X M3 Nuts.
Fan Fixing:
4X M5 10mm Bolts.
4X M5 Nuts.
Fan cover Mount:
4X M3 30mm.
4X M4 Nuts.
UPDATE 01/03/2019: Some people related that they can't use Anti-Backlash because the original Z Motor Supports will make your lead screw shorter. So I added a new Z motor support that can solve the issue.
The V2 BOTTOM ENCLOSURE is available now: https://www.thingiverse.com/thing:3942786
VERY IMPORTANT: The Top case was made for 255MM Bed frame Y extrusion. For any change in the design contact me.
Printed with PLA at 190ºC and Bed at 45ºC.
Was spent about 520g.
To mount the cover you will need:
16X M5 10mm Bolts.
16X T-NUTS.
16X M3 10mm Bolts.
16X M3 Nuts.
Fan Fixing:
4X M5 10mm Bolts.
4X M5 Nuts.
Fan cover Mount:
4X M3 30mm.
4X M4 Nuts.
UPDATE 01/03/2019: Some people related that they can't use Anti-Backlash because the original Z Motor Supports will make your lead screw shorter. So I added a new Z motor support that can solve the issue.