Hybrid Spinner by Mt_Man

Last crawled date: 3 years ago

The Fidget Spinner is the hottest toy around right now and there are a lot of files on Thingiverse for them. I tried several and was disappointed with the results. I don't like to waste three bearings so I don't like the classic design. The thing I remixed this from was good, but it was a bit thin around the bearing and was prone to breaking. I also didn't like the nuts sticking out beyond the edges. This is a remix/redesign of several tri-spinners. I find that it works really well! I hope that you will enjoy it as well.
You will also need:
1-608 Bearing (since you didn't waste money buying 4 you and afford on ceramic one)
3- 1/2" SAE nut
I recommend that you print this in ABS or PETG. These get dropped a lot and in PLA they break when they hit the floor. I also recommend that you anneal your parts after you print them as this adds a lot of strength.https://rigid.ink/blogs/news/how-to-anneal-your-3d-prints-for-strength
If you don't print in ABS because your are scared of the fumes, don't listen to the blogs, the fumes aren't very bad, I print in ABS all day long in a closed office and I hardly notice at all.
Enjoy this thing and happy printing!
If you would like one of these and don't want to hassle with printing it, visit my shop: https://www.etsy.com/listing/517021580/nutty-fidget-spinners?ref=shop_home_active_1
Update: For those that want a large button on either side, I added that file as well.