Husqvarna Automower AC220 LINIX motor gear by patLPG

Last crawled date: 3 years, 1 month ago

TEST IN PROGESS; My automower is running with this gears since March 1st, 2021 (6050h) and I don't have a long experience with them.
Replacement gear for LINIX wheel motor used in Husqvarna AC220 (maybe other) automower.
This motor is very expensive; +180Eur
Most problems with this motor are caused by those gears and can be fixed for a few cents.
You need to print 3 of those. One at a time give me the best quality (since the extruder is not jumping to the other pieces).
Material; PETG
Setting; finest settings & reduced speed
Infill; 100%
Scale: CURA X:112%, Y:112%, Z:105% (due to this small parts, I had to print different test and scale to find the exact fit)
To adjust the inner shaft; I used a 3mm drill and moved the gear on it to make it a bit looser. I also used a heat gun and knife to clean and adjust the gear.