Thingiverse
Hummingbird Whirligig by Sparky6548
by Thingiverse
Last crawled date: 4 years, 1 month ago
Hummingbird Whirligig
This is the smallest whirligig yet for me.
You will need the following items in addition to the 3-D printed parts:
(1) - 1/4 inch (6mm) all thread rod about 8 inches (200mm) long
(6) - 1/4-20 (m6) nuts
(1) - 5/16 (8mm) all thread rod long enough to make a mounting base for the whirligig
(2) - 5/16 (m8) nyloc nuts
(2) - r4zz skateboard bearings
(2) - 608zz skateboard bearings
(8) - 8-32 (m4) X 1 inch (25mm round head screws
(8) - 8-32 (m4) nuts
(1) - 6-32 (m3) X 1 inch (25mm) round head screws
(1) - 6-32 (m3) nuts
(2) - cotter pins approximately 1/16 inch (1.5mm) X 3/4 inch (19mm)
(2) - cotter pins approximately 1/16 inch (1.5mm) X 1 inch (25mm)
You will also need about a foot (300mm) of small stiff wire to make the wings flap. I used some steel wire that I have that is about .3 inches (.8mm) diameter which works out to about 20 gauge wire. You could also probably use copper wire for this.
And you will also need some glue. I used fix-all adhesive that I got from the Dollar Tree store, but super glue would also work just fine.
Assembly should be self explanatory, but I have included a file called Hummingbird Assembly Diagram if you need it. There are two very small washers (spacers?) that go between the nuts and the R4zz bearings to help them rotate more freely when the nuts are tightened.
The wings, body, lever, prop bodies, prop shafts, and wobble cam have been split in half so they will print without support. The wings and body have some relief features to make them easier to paint. All these parts will glue together after printing them.
The only parts that will need supports are the front and rear bases and the swivel. They each have recesses for bearings that won't print correctly without supports.
The file names indicate how many of each part need to be printed eg: Lever Half2.stl means to print two of them.
Here is a video of it in action https://www.youtube.com/watch?v=HAC4g2GSnXM
This is the smallest whirligig yet for me.
You will need the following items in addition to the 3-D printed parts:
(1) - 1/4 inch (6mm) all thread rod about 8 inches (200mm) long
(6) - 1/4-20 (m6) nuts
(1) - 5/16 (8mm) all thread rod long enough to make a mounting base for the whirligig
(2) - 5/16 (m8) nyloc nuts
(2) - r4zz skateboard bearings
(2) - 608zz skateboard bearings
(8) - 8-32 (m4) X 1 inch (25mm round head screws
(8) - 8-32 (m4) nuts
(1) - 6-32 (m3) X 1 inch (25mm) round head screws
(1) - 6-32 (m3) nuts
(2) - cotter pins approximately 1/16 inch (1.5mm) X 3/4 inch (19mm)
(2) - cotter pins approximately 1/16 inch (1.5mm) X 1 inch (25mm)
You will also need about a foot (300mm) of small stiff wire to make the wings flap. I used some steel wire that I have that is about .3 inches (.8mm) diameter which works out to about 20 gauge wire. You could also probably use copper wire for this.
And you will also need some glue. I used fix-all adhesive that I got from the Dollar Tree store, but super glue would also work just fine.
Assembly should be self explanatory, but I have included a file called Hummingbird Assembly Diagram if you need it. There are two very small washers (spacers?) that go between the nuts and the R4zz bearings to help them rotate more freely when the nuts are tightened.
The wings, body, lever, prop bodies, prop shafts, and wobble cam have been split in half so they will print without support. The wings and body have some relief features to make them easier to paint. All these parts will glue together after printing them.
The only parts that will need supports are the front and rear bases and the swivel. They each have recesses for bearings that won't print correctly without supports.
The file names indicate how many of each part need to be printed eg: Lever Half2.stl means to print two of them.
Here is a video of it in action https://www.youtube.com/watch?v=HAC4g2GSnXM
Similar models
thingiverse
free
Knurled Tri-Spinner Fidget Widget / Triple Bearing Spinner by swholmstead
...ps are flush.
requires:
1x 608 bearing
3x 1/2" nuts
everything press fits without glue. enjoy!
https://youtu.be/xfij6evct88
thingiverse
free
Dragon Pendant by Nys1
...dy
i made 2 holes in the body ( see picture) with the tip of my soldering iron to fit the wings
use glue to put all together....
grabcad
free
5/32 x 2-1/2" Wire Snap Cotter Pin
...ter pin, 5/32" (.1562) diameter x 2-1/2" usable length as measured between the u-clip and the loop od. 4-1/4" oal.
thingiverse
free
PCB Holder - Imperial Sizing by neuralnoise
...al version for more information and inspiration.
i am about to print this now, and i'll update with anything that goes wrong.
thingiverse
free
Triforce Spinner by haquedmd
...m to the 3/8 inch nuts to get the triforce designs to "stick" around. i used ca glue (super glue/cyanoacrylate).
enjoy!
thingiverse
free
LARGE EARBUD HOLDER by Nels54
... is glue in ( see pictures) this file is also available. i have another design for a small size earbuds will post that one later.
thingiverse
free
Wing access panel holder by donandtheresa
...e store same as the 6-32 nuts that snap into the inside plate. i did make these for the rvjet but could be modified for any wing.
thingiverse
free
Hub Style Wing Nut 3/8 - 16 UNC Wingnut by scottmi
... is one for 3/8 - 16 unc thread. base is .75" diamerter, overall hight is 1.02 inches, "wingspan" is 1.52 inches.
thingiverse
free
Foam A Nature - Nerf Double Barrel Shotgun by ehdrien
...is part replaces "barrel_topstripe.stl". so, you can choose if you want a flat top or a picatinny rail on your barrels.
thingiverse
free
Spool Holder by Realsville
... bolt (axle).
works with:https://www.thingiverse.com/thing:4692005
print:
2-body
2-rail
1-center body
8-wheel
8-shim
4-bolt
4-nut
Sparky6548
thingiverse
free
GO ZAGS! by Sparky6548
...go zags! by sparky6548
thingiverse
gonzaga university coaster.
thingiverse
free
Moose by Sparky6548
... this at a restaurant where my wife and i were eating lunch. i liked it, so when we go home, i made one. thought i'd share.
thingiverse
free
Nativity Scene by Sparky6548
...y6548
thingiverse
a nativity scene i put together.
it is designed to just fit my flashforge creator pro (about 220 x 145 mm).
thingiverse
free
Bobbin Tray by Sparky6548
...ife asked me if i could make her a tray to hold her sewing machine bobbins. she seems happy with this, so thought i would share.
thingiverse
free
Golf putter clip by Sparky6548
...wo are of an earlier design that i had to modify because it was too tight. i couldn't get the putter handle to snap into it.
thingiverse
free
3D Printed Whirligig by Sparky6548
...ou may have used.
i've posted a short video showing action.https://www.youtube.com/watch?v=b7xo6onpo9a&feature=youtu.be
thingiverse
free
Lever for Harbor Freight bar clamp by Sparky6548
...en lever. i have put more pressure on this one than it took to break the original ones, so hopefully i now have two good clamps.
thingiverse
free
Gonzaga drink coaster by Sparky6548
...just one extruder. this experiment was done using prusaslicer and a prusa i3 mks, but it should work on other printers as well.
thingiverse
free
Toyota Sequoia key fob fix by Sparky6548
...her models and possibly other year toyotas.
i used tpu for the print, but it's likely that any flexible plastic would work.
thingiverse
free
Chickens Whirligig by Sparky6548
...cause of the snow, so i had to shoot it in my kitchen. sorry about the video quality.https://www.youtube.com/watch?v=tdt6vdlc9wy
Whirligig
3d_ocean
$3
whirligig
...g
very detailed whirligig. 46786 polygons. c4d main file included. c4d & obj file format. well we hope you enjoy it regards.
turbosquid
$50
Asian Whirligig (nagor dola)
...whirligig (nagor dola) for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1510299)
archibase_planet
free
Chute
...chute archibase planet chute playground whirligig chute with awning - 3d model for interior 3d...
archibase_planet
free
Chute
...chute archibase planet chute carousel whirligig chute ?ottage - 3d model for interior 3d...
archibase_planet
free
Swing
...swing archibase planet swing whirligig playground swing - kid - 3d model for interior...
archibase_planet
free
Carousel
...carousel archibase planet roundabout carousel whirligig carousel squirrel - 3d model for interior 3d...
archibase_planet
free
Carousel
...carousel archibase planet roundabout whirligig swing carousel manual - mushroom - 3d model for...
archibase_planet
free
Roundabout
...roundabout archibase planet carrousel roundabout whirligig roundabout - 3d model (*.gsm+*.3ds) for interior 3d...
archive3d
free
Chute 3D Model
...chute 3d model archive3d chute playground whirligig chute with awning - 3d model for interior 3d...
archive3d
free
Swing 3D Model
...swing 3d model archive3d swing whirligig playground swing - kid - 3d model for interior...
Hummingbird
3d_export
$65
hummingbird
...hummingbird
3dexport
simple rendering of the scene file
3d_export
$25
hummingbird
...hummingbird
3dexport
simple rendering of the scene file
turbosquid
$59
Hummingbird Feeder
... free 3d model hummingbird feeder for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1444996)
turbosquid
$20
hummingbird feeder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Hummingbird Feeder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Cartoon Hummingbird
...oon hummingbird for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1598479)
3d_export
$5
wall decoration hummingbird mirror
...wall decoration hummingbird mirror
3dexport
wall decoration hummingbird mirror kare design
3d_export
$65
hummingbird animated unity
...hummingbird animated unity
3dexport
3d_export
$15
Blue Throated Hummingbird
...blue throated hummingbird
3dexport
simple rendering of the scene file
3ddd
free
Hummingbird rug by Alexander Mcqueen
...ingbird rug by alexander mcqueen
3ddd
ковер
ковер hummingbird компании rug company дизайнера alexander mcqueen. в архиве есть fbx