Thingiverse
HS1177 mount for CP215 KOA frame by olex
by Thingiverse
Last crawled date: 4 years, 7 months ago
Camera mount to fit a HS1177 camera to the CP215KOA racing quadcopter frame.
Assembly instructions
Insert two M3 nuts into the hexagonal holes from the inside. Use pliers to press them in if necessary. Push the HS1177 in from the back and secure using the standard mounting bracket screws that come with the camera. Then install the mount into the frame using M3x6 screws through the standard mounting holes.
Important note
The HS1177 gets quite warm when powered by 12V or more. If possible, power the camera with 5V to prevent heating issues in the enclosed mount.
Assembly instructions
Insert two M3 nuts into the hexagonal holes from the inside. Use pliers to press them in if necessary. Push the HS1177 in from the back and secure using the standard mounting bracket screws that come with the camera. Then install the mount into the frame using M3x6 screws through the standard mounting holes.
Important note
The HS1177 gets quite warm when powered by 12V or more. If possible, power the camera with 5V to prevent heating issues in the enclosed mount.